Its dual Power over Ethernet (PoE) ports provides redundant power feeds to increase power supply availability. Hardware Flexibility for Networking and Multi-Radio, External Antenna Connectors. Hardware wise, a single OWL800 is capable of hosting 2-4 multiple radio modules simultaneously. Each module can be used for serving wireless clients, building wireless bridges, or establishing wireless backhauls. For some countries that permit high-power transmission, higher power modules are optionally available. There are 4 N-type antenna connectors extended from the modules on the OWL800 board, which not only gives the flexibility in choosing antennas but greatly simplifies the antenna installation. Software Flexibility for Networking.

Multi-Mode, Multi-Link. AP, Bridge/Mesh Node, Gateway. To support diversified wireless network architectures, the OWL800 provides multiple operating modes, including Point-to-Point Bridge, Point-to-Multipoint Bridge, AP station and AP Gateway. Unlike most of common access points that rely on a single radio for different purposes at one time, the OWL800 with multiple radio modules receives and transmits over-the-air signals for each bridge link or AP station with one dedicated wireless radio to prevent degraded performance.

Features & Benefits

Rugged for Outdoor or Harsh Environment

Weatherproof and watertight cast-metal housing with an IP68 rating
Surge immunity up to 15KV
Dual PoE for redundant power input and data link
Support multiple operation modes – Gateway mode, AP mode, and Relay mode
Multiple Radios and Antenna Connectors, Flexible for PtP, PtMP, or Mesh networks

Two built-in 802.11 a/b/g radio with two additional mini-PCI slots for expansion
High power radio modules are available options for countries where higher power transmitting is permitted
Low-loss N-type connectors allow for more flexible antenna choices for professionals
Antennas can be attached directly on the OWL800, or connected closely to OWL800, for reducing signal losses
Dual bands (2.4G and 5G) with more channels allow better channel planning to avoid interference
Each Radio module can be configured as AP or WDS independently. Up to four modules can be serving in one OWL800
Built-in AAA and User Management for Hotspot Operation

Support built-in Local accounts and On-demand accounts for user authentication
Support multiple external RADIUS servers for user authentication
Support UAM and IEEE802.1x access control functions
Built-in Hotspot access control and billing features
Robust and Reliable Wireless Link Construction

Dual PoE power input
Support 8 WDS links per 802.11a/b/g radio module
WDS discovery and link table for easy connect
Support VLAN tags over wireless inter-AP links (WDS) in addition to over the wireless links from clients to AP
Dynamic wireless link backup for network reliability
Dedicated WDS radios could form a mesh WLAN without taking away some bandwidth for serving clients
Wireless Security and QoS Support

Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or Pre-Shared Key
Support encryption, including WEP, AES, or TKIP, over wireless inter-AP links (WDS)
Wireless LAN segmentation, Disable SSID Broadcast
Support client-isolation so that clients are isolated from each other under one AP
Support QoS tags over wireless inter-AP links (WDS)
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty multimedia applications such as voice, audio and video
Excellent Solution for Community WLAN

Each AP module is capable of emulating up to 8 virtual APs (VAPs) simultaneously
With the capabilities of multiple-SSID and VLAN tag association, OWL800 allows equipment-sharing among different franchises; moreover, its QoS feature enables differentiated service operations
Multiple OWL800's can be managed under an external WLAN controller to form a managed WLAN solution.

When operating in CPE (Client) mode, it functions as a Wi-Fi modem gateway to receive wireless signal over the last-mile Internet feed from WISPs. The CPE's bandwidth to the Internet can be assigned by the WISP. When in AP mode, OWL510 operates as an AP station with wall-penetrating high-power signal and long-range coverage to better serve Wi-Fi clients. In addition, it can be set up as a WDS-mesh node by establishing multiple WDS links to bridge neighbor access points together. Coming with business-class security, OWL510 in AP mode is also ideal for enterprise applications. Furthermore, one OWL510 with multiple SSIDs is capable of acting as multiple Virtual APs (VAPs). By tagging the traffic from each VAP with a unique VLAN ID, it allows for segmenting a corporate network using VLANs to protect critical resources. Being a versatile Wi-Fi device, OWL510 does not limit itself to outdoor usage only. When managed by a Controller (such as the WHG-series), it performs as a Wi-Fi base station in either a public or private wireless access deployment.

Features & Benefits

Rugged, Compact-Sized, and Adaptive to Versatile Environments

Diversified deployments:
Municipal Wi-Fi service
Home Ower Association (HOA), RV parks, and recreation resorts
Hotels, mobile hospitals, and mobile libraries
Shopping malls, airports, harbors, roadways, warehouse, and manufacturing plants
IP68 weather- and water-proof
Housed in durable, rust-resistant metal casing
High Transmit Power and Built-in Patch Antenna

Up to 500mW output power from the board to transmit stronger signals for longer range
Built-in patch antenna for installation convenience and efficiency
LED indicators to display wireless signal strength
High-speed with QoS for Voice, Video, and Data Applications

Equipped with a high-speed IEEE 802.11g wireless network interface based on Atheros™ chipset, transmit rates up to 54Mbps
Backward compatible with 802.11b
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty triple-play (voice, video, and data) applications
Power over Ethernet (PoE) & Flexible Mounting Options

PoE feature reduces the need of additional power cable to the device; a quality Power Supply Equipment (PSE) is bundled in the package
Wall and pole mountable; mounting kit included
Multiple Operation Modes for Different Infrastructures

Two administrator accounts - one for WISP to manage wireless broadband subscribers
Multiple operation modes:
CPE Mode – wireless modem with IP sharing
AP Mode – pure AP
WDS Mode – AP with wireless bridge
Universal Repeater Mode – with MAC NAT
Business-class Security and Multiple-SSID/ VLAN tagging Support

Full range of enterprise-grade wireless security mechanisms such as WEP, WPA and WPA2 (802.11i)
Multiple-SSID capability enables one OWL510 to behave like up to 8 unique Virtual APs (VAPs), the equivalent of 8 wireless Virtual LANs (VLANs) to securely segment wireless network traffic
Support client isolation in public hotspot operation.

When operating in CPE (Client) mode, it functions as a Wi-Fi modem gateway to receive wireless signal over the last-mile Internet feed from WISPs. The CPE's bandwidth to the Internet can be assigned by the WISP. When in AP mode, OWL510 operates as an AP station with wall-penetrating high-power signal and long-range coverage to better serve Wi-Fi clients. In addition, it can be set up as a WDS-mesh node by establishing multiple WDS links to bridge neighbor access points together. Coming with business-class security, OWL510 in AP mode is also ideal for enterprise applications. Furthermore, one OWL510 with multiple SSIDs is capable of acting as multiple Virtual APs (VAPs). By tagging the traffic from each VAP with a unique VLAN ID, it allows for segmenting a corporate network using VLANs to protect critical resources. Being a versatile Wi-Fi device, OWL510 does not limit itself to outdoor usage only. When managed by a Controller (such as the WHG-series), it performs as a Wi-Fi base station in either a public or private wireless access deployment.

Features & Benefits

Rugged, Compact-Sized, and Adaptive to Versatile Environments

Diversified deployments:
Municipal Wi-Fi service
Home Ower Association (HOA), RV parks, and recreation resorts
Hotels, mobile hospitals, and mobile libraries
Shopping malls, airports, harbors, roadways, warehouse, and manufacturing plants
IP68 weather- and water-proof
Housed in durable, rust-resistant metal casing
High Transmit Power and Built-in Patch Antenna

Up to 500mW output power from the board to transmit stronger signals for longer range
Built-in patch antenna for installation convenience and efficiency
LED indicators to display wireless signal strength
High-speed with QoS for Voice, Video, and Data Applications

Equipped with a high-speed IEEE 802.11g wireless network interface based on Atheros™ chipset, transmit rates up to 54Mbps
Backward compatible with 802.11b
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty triple-play (voice, video, and data) applications
Power over Ethernet (PoE) & Flexible Mounting Options

PoE feature reduces the need of additional power cable to the device; a quality Power Supply Equipment (PSE) is bundled in the package
Wall and pole mountable; mounting kit included
Multiple Operation Modes for Different Infrastructures

Two administrator accounts - one for WISP to manage wireless broadband subscribers
Multiple operation modes:
CPE Mode – wireless modem with IP sharing
AP Mode – pure AP
WDS Mode – AP with wireless bridge
Universal Repeater Mode – with MAC NAT
Business-class Security and Multiple-SSID/ VLAN tagging Support

Full range of enterprise-grade wireless security mechanisms such as WEP, WPA and WPA2 (802.11i)
Multiple-SSID capability enables one OWL510 to behave like up to 8 unique Virtual APs (VAPs), the equivalent of 8 wireless Virtual LANs (VLANs) to securely segment wireless network traffic
Support client isolation in public hotspot operation.

OWL410 supports multiple operation modes (AP/Bridge/CPE) and works well as a last-mile solution for wireless ISPs (WISPs). When in AP mode, OWL410 operates as an AP station with wall-penetrating high-power signal and long-range coverage to better serve Wi-Fi clients. In addition, it can be set up as a WDS node by establishing multiple WDS links to bridge neighbor access points together.

Coming with business-class security, OWL410 in AP mode is also ideal for enterprise applications. Furthermore, one OWL410 with multiple SSIDs is capable of acting as multiple Virtual APs (VAPs). By tagging the traffic from each VAP with a unique VLAN ID, it allows for segmenting a corporate network using VLANs to protect critical resources.

When operating in CPE (Client) mode, it functions as a Wi-Fi modem gateway to receive wireless signal over the last-mile Internet feed from WISPs. The CPE’s bandwidth to the Internet can be assigned by the WISP.

Being a versatile Wi-Fi device, OWL410 does not limit itself to outdoor usage only. When managed by a Controller (such as the WHG-series), it performs as a Wi-Fi base station in either a public or private wireless access deployment.

Rugged, Compact-Sized, and Adaptive to Versatile Environments
Diversified deployments:
Municipal Wi-Fi service
Home Owner Association (HOA), RV parks, and recreation resorts
Hotels, mobile hospitals, and mobile libraries
Shopping malls, airports, harbors, roadways, warehouse, and manufacturing plants
IP68 weather- and water-proof, housed in durable, rust-resistant metal casing
High Transmit Power and Built-in Patch Antenna
Up to 200mW output power from the board to transmit stronger signals for longer range
Built-in patch antenna for installation convenience and efficiency
High-speed with QoS for Voice, Video, and Data Applications
Equipped with a high-speed IEEE 802.11n/a chipset, supporting transmit rate up to 300Mbps
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty triple-play (voice, video, and data) applications
Power over Ethernet (PoE) & Flexible Mounting Options
PoE feature reduces the need of additional power cable to the device; a quality Power Supply Equipment (PSE) is bundled in the package
Wall and pole mountable; mounting kit included
Multiple Operation Modes for Different Infrastructures
Two administrator accounts – one for WISP to manage wireless broadband one for subscribers
Multiple operation modes:
AP Mode – pure AP
WDS Mode – AP with wireless bridge
Universal Repeater Mode – with MAC NAT
CPE Mode – wireless modem with IP sharing
Business-class Security and Multiple-SSID/ VLAN tagging Support
Full range of enterprise-grade wireless security mechanisms such as WEP, WPA and WPA2 (802.11i)
Multiple-SSID capability enables one OWL410 to behave like up to 7 unique APs, the equivalent of 7 wireless Virtual LANs (VLANs) to securely segment wireless network traffic
Support client isolation in public hotspot operation

OWL400 supports multiple operation modes (AP/Bridge/CPE) and works well as a last-mile solution for wireless ISPs (WISPs). When in AP mode, OWL400 operates as an AP station with wall-penetrating high-power signal and long-range coverage to better serve Wi-Fi clients. In addition, it can be set up as a WDS node by establishing multiple WDS links to bridge neighbor access points together.

Coming with business-class security, OWL400 in AP mode is also ideal for enterprise applications. Furthermore, one OWL400 with multiple SSIDs is capable of acting as multiple Virtual APs (VAPs). By tagging the traffic from each VAP with a unique VLAN ID, it allows for segmenting a corporate network using VLANs to protect critical resources.

When operating in CPE (Client) mode, it functions as a Wi-Fi modem gateway to receive wireless signal over the last-mile Internet feed from WISPs. The CPE’s bandwidth to the Internet can be assigned by the WISP.

Being a versatile Wi-Fi device, OWL400 does not limit itself to outdoor usage only. When managed by a Controller (such as the WHG-series), it performs as a Wi-Fi base station in either a public or private wireless access deployment.

Rugged, Compact-Sized, and Adaptive to Versatile Environments
Diversified deployments:
Municipal Wi-Fi service
Home Owner Association (HOA), RV parks, and recreation resorts
Hotels, mobile hospitals, and mobile libraries
Shopping malls, airports, harbors, roadways, warehouse, and manufacturing plants
IP68 weather- and water-proof, housed in durable, rust-resistant metal casing
High Transmit Power and N-type Connector
Up to 200mW output power from the board to transmit stronger signals for longer range
N-type connector allows for choosing suitable antenna types and gains with flexibility
High-speed with QoS for Voice, Video, and Data Applications
Equipped with a high-speed IEEE 802.11n/a chipset, supporting transmit rate up to 300Mbps
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty triple-play (voice, video, and data) applications
Power over Ethernet (PoE) & Flexible Mounting Options
PoE feature reduces the need of additional power cable to the device; a quality Power Supply Equipment (PSE) is bundled in the package
Wall and pole mountable; mounting kit included
Multiple Operation Modes for Different Infrastructures
Two administrator accounts – one for WISP to manage wireless broadband one for subscribers
Multiple operation modes:
AP Mode – pure AP
WDS Mode – AP with wireless bridge
Universal Repeater Mode – with MAC NAT
CPE Mode – wireless modem with IP sharing
Business-class Security and Multiple-SSID/ VLAN tagging Support
Full range of enterprise-grade wireless security mechanisms such as WEP, WPA and WPA2 (802.11i)
Multiple-SSID capability enables one OWL400 to behave like up to 7 unique APs, the equivalent of 7 wireless Virtual LANs (VLANs) to securely segment wireless network traffic
Support client isolation in public hotspot operation

The IP68-rated metal sealed CPE110 is compact in size and weatherproof. Coming with a mounting kit, it can be mounted on a pole or wall. It is suitable for both indoor and outdoor usage with its 200mW output power.

The CPE 100 can be deployed in various environments, for example:

• Outdoor access point for school campuses, enterprise campuses, or manufacture plants.
• Wireless CPE for MDU/ MTU, such as apartments, dormitories, and office complexes.
• Indoor access point for hotels, factories, or warehouses where metal industrial grade devices are preferred.
• Public hotspot operation for café, parks, convention centers, shopping malls, or airports.
• Wireless coverage for both indoor and outdoor ground for private resorts, acre estate/home’s yards, or golf course communities.

A WISP Deployment Example

Acts as a “Wireless Modem” to bring wireless bandwidth to home and office buildings.
Wireless Bandwidth Allocation (uplink/downlink) delivered to each building depending on different subscription plans.
Full range of wireless security mechanisms such as WEP, WPA and WPA2 (802.11i) that are important for enterprise wireless deployments.
Acts as a Home Router for IP Sharing and firewall, all-in-one installation solution.
Weatherproof and watertight from its rugged aluminum housing (IP68 Approved).
Power over Ethernet (PoE) built-in for single cable installation.
On board Ethernet surge protection.
Multi-mode Support:
CPE Mode
AP Mode
WDS Mode
Universal Repeater (Bridge) Mode

The IP68-rated metal sealed CPE100 is compact in size and weatherproof. Coming with a mounting kit, it can be mounted on a pole or wall. It is suitable for both indoor and outdoor usage with its 200mW output power.

The CPE 100 can be deployed in various environments, for example:

• Outdoor access point for school campuses, enterprise campuses, or manufacture plants.
• Wireless CPE for MDU/ MTU, such as apartments, dormitories, and office complexes.
• Indoor access point for hotels, factories, or warehouses where metal industrial grade devices are preferred.
• Public hotspot operation for café, parks, convention centers, shopping malls, or airports.
• Wireless coverage for both indoor and outdoor ground for private resorts, acre estate/home’s yards, or golf course communities.

A WISP Deployment Example

Acts as a “Wireless Modem” to bring wireless bandwidth to home and office buildings.
Wireless Bandwidth Allocation (uplink/downlink) delivered to each building depending on different subscription plans.
Full range of wireless security mechanisms such as WEP, WPA and WPA2 (802.11i) that are important for enterprise wireless deployments.
Acts as a Home Router for IP Sharing and firewall, all-in-one installation solution.
Weatherproof and watertight from its rugged aluminum housing (IP68 Approved).
Power over Ethernet (PoE) built-in for single cable installation.
On board Ethernet surge protection.
Multi-mode Support:
CPE Mode
AP Mode
WDS Mode
Universal Repeater (Bridge) Mode