HSG1200 er også ideel til gæstfrihed anvendelse. For eksempel kan et hotel bruge tjenesten zone funktion til at adskille privilegier af personale, gæster og VIP brug for at få adgang til internettet.

Den HSG1200 indbyggede on-demand konto generation evne er nem at bruge ved at kasserere eller receptionister. Hver gæst konto er knyttet til en pris og en brug kvote, enten ved tid eller lydstyrke. Desuden HSG1200 arbejder med de eksisterende RADIUS-serveren, hvis centrale fakturering var blevet gennemført af operatøren.

Nem installation og betjening

• Understøtter forskellige bredbånd valgmuligheder (T1, DSL, Kabel) via statisk IP, DHCP, PPPoE og PPTP
• Indbygget brugerdatabasen giver tilstrækkeligt hensyn kapacitet til forskellige drift scenarier
• Arbejder med øjeblikkelig konto generator til at give brugerkonti for besøgende-baseret, on-demand operationer
• Load balancing og WAN failover øge båndbredde udnyttelse og give mere pålidelige internetforbindelse

Integrerede sikkerhedsfunktioner

• Standard-baserede data kryptering og brugergodkendelse: SSL, IEEE 802.1X, WPA-RADIUS
• Sikker gæst og administrator adgang ved hjælp af web-baserede login og administration over SSL
• Konfigurerbare pakkefiltrering politikker forbedre datatrafikken sikkerhed
• Indbygget DoS beskyttelse forhindrer hackere i at kollapse netværket

Effektiv Bruger Management

• Komplette autencitetsmekanisme blokke godkendte brugere at få adgang til netværket
• Rolle-baserede og politisk baserede politikker for kontrol øge beskyttelsen mod ondsindede brugere
• "On-line bruger list" overvåger real-time status for hver enkelt bruger
• Tillader session udløbet kontrol for On-demand brugere af tid og datamængde

Fleksibel Regnskab og fakturering

• Programmerbare fakturering profiler tillade driftsledere at tilpasse fakturering planer for On-demand-brugere
• Båndbredde styring gør det muligt klasse service for forskellige niveauer af brugere og maksimere fortjenesten
• RADIUS VSA (leverandørspecifikke attributter) gennemførelse tilføjer fleksibilitet til regnskabs-og session kontrol ved hjælp af RADIUS-serveren
• Detaljeret per-bruger trafik historie log til analyse og registrering
• Billing Rapporten giver en oversigt over transaktion optegnelser for On-demand-brugere

Netværk

• Understøtter Router, NAT-mode
• Understøtter statisk IP, DHCP, PPPoE, PPTP Dial-up
• Understøtter IP Plug and Play (IP PnP)
• Indbygget DHCP server og støtte til DHCP relay
• Understøtter NAT:
• IP / Port Destination Omdirigering
• DMZ Server Mapping
• Virtual Server Mapping
• Konfigurerbar statisk rute
• Understøtter e-mail-service via udpegede e-mail-server
• Understøtter Walled Garden
• Walled Have Annonce Liste gør reklame hjemmeside links på login-portal side
• Understøtter MAC-adresse Pass-Through
• Understøtter HTTP Proxy
• Understøtter Ethernet-forbindelse til eksterne terminalservere
• Støtte dobbelt uplinks og udgående load balancing og failover for mere pålidelig internetforbindelse
• Support SIP gennemløbsinvesteringer NAT

Sikkerhed

• Understøtter sikkerhedsstandarder: SSL, IEEE 802.1x og WPA-RADIUS
• Understøtter VPN pass-through (IPSec og PPTP)
• Indbygget DoS attack beskyttelse
• Understøtter site-to-site VPN tunnel
• Understøtter MAC Access Control List
• Konfigurerbar bruger sorte liste
• Tillader MAC-adresse og bruger-id bindende for lokal brugergodkendelse

Servicezoner

• Nettet er opdelt i højst 9 service zoner, der hver defineret ved en VLAN tag
• Hver tjeneste zone har sin egen
• login portal side
• muligheder for autentifikation
• LAN-grænseflade IP
• DHCP-adresse rækkevidde
• Hver tjeneste zone giver adgang til de valgte grupper
• Hver tjeneste zone tildeler et netværk politik til hver brugergruppe

Bruger Management

• Understøtter 3.000 lokale konti
• Understøtter 2.000 on-demand konti
• Samtidig understøttelse af flere godkendelsesmetoder (Lokale og On-demand-konti, POP3, LDAP og RADIUS, NT Domain)
• Policy-baseret adgangskontrol (per-rolle opgaver baseret på firewall-politikker, fræsning, login Planlæg, båndbredde, kvote, og Session)

1. Bruger Session Management:
2. SSL-beskyttet login portal side
3. Understøtter flere logins med en enkelt konto
4. Session Standbytimer
5. Session og konto udløb kontrol
6. Anmeldelse e-mail til at give et link til login portal side
7. Understøtter Single Sign-On til Windows Domain
8. Log tidsramme kontrol
9. Session grænse

Regnskab og fakturering

• Giver fakturering planer for On-demand-konti
• Aktiverer session udløbet kontrol for On-demand konti ved tid (timer) og datamængde (MB)
• Detaljeret per-bruger trafik historie baseret på tid og datamængde for både lokale og On-demand-konti
• Trafik historie rapport i en automatisk e-mail til administrator
• Understøtter RADIUS VSA (leverandørspecifikke attributter) gennemførelse for trafik regnskabs-og session kontrol
• Understøtter betaling med kreditkort via eksterne betalings-gateways (Authorize.Net, PayPal, SecurePay, WorldPay)

System Administration

• Web-baseret styrings-UI
• Customizable login og logout portal side
• Støtte til SNMP v1, v2c
• SSH fjernadministration
• Fjernbetjening firmware opgradering
• NTP tid synkronisering
• Menu drevet konsol management interface
• Værktøjer til sikkerhedskopiering og gendannelse af systemkonfiguration

Overvågning og rapportering

• Online status overvågning af brugere
• IP-baseret overvågning af enheder
• WAN-forbindelse fiasko alarm
• Understøtter ekstern Syslog server til diagnosticering og fejlfinding
• Understøtter bruger trafik historie skovhugst
• Understøtter bruger trafik session (TCP / UDP) skovhugst
• Understøtter lokal bruger månedlige forbrug rapport

Fysisk og Power

• Power Adapter: 100 ~ 240 VAC, 50/60 Hz
• Form Factor: 19 "1U Rack Mount
• Dimensioner (B x D x H): 16.9 "x 6,1" x 1,7 "(430 mm x 155 mm x 43 mm)
• Vægt: 3,3 lbs (1,5 kg)

Hardware Specifikationer

• WAN-porte: 2 x 10/100BASE-TX RJ-45
• LAN-porte: 4 x 10/100BASE-TX RJ-45
• Console Port: 1 x RS-232 DB9
• LED-indikatorer: 1 x Power, 1 x status, 2 x WAN, 4 x LAN

Miljø

• Driftstemperatur: 0 ~ 40 ° C
• Opbevaringstemperatur: -20 ~ 65 ° C

Certificeringer

• CE, FCC
• I overensstemmelse med RoHS

Pakkens indhold

• HS1200 x 1
• CD-rom (Brugervejledning og QIG) x 1
• Hurtig Installationsvejledning (QIG) x 1
• Console kabel x 1
• Ethernet-kabel x 1
• Lige Ethernet-kabel x 1
• Power Adapter (DC 12V) med Power Cord x 1
• Rack monteringsbeslag (med skruer) x 1

HSG3200 er også ideel til gæstfrihed anvendelse. For eksempel kan et hotel bruge tjenesten zone funktion til at adskille privilegier af personale, gæste-, VIP-og konvention brug for adgang til internettet.

Den HSG3200 indbyggede on-demand konto generation evne er nem at bruge ved at kasserere eller receptionister. Hver gæst konto er knyttet til en pris og en brug kvote, enten ved tid eller lydstyrke. Desuden HSG3200 arbejder med de eksisterende RADIUS-serveren, hvis centrale fakturering var blevet gennemført af operatøren.

Funktioner og fordele

Nem installation og betjening

Understøtter forskellige bredbånd valgmuligheder (T1, DSL, Kabel) via statisk IP, DHCP, PPPoE og PPTP
Indbygget brugerdatabasen giver tilstrækkeligt hensyn kapacitet til forskellige drift scenarier
Arbejder med øjeblikkelig konto generator til at give brugerkonti for besøgende-baseret, on-demand operationer
Load balancing og WAN failover øge båndbredde udnyttelse og give mere pålidelige internetforbindelse
Integrerede sikkerhedsfunktioner

Standarder-baserede data kryptering og brugergodkendelse: SSL, IEEE 802.1x, WPA-RADIUS
Sikker gæst og administrator adgang ved hjælp af web-baserede login og administration over SSL
Konfigurerbare pakkefiltrering politikker forbedre datatrafikken sikkerhed
Indbygget DoS beskyttelse forhindrer hackere i at kollapse netværket
Effektiv Bruger Management

Komplette autencitetsmekanisme blokke godkendte brugere at få adgang til netværket
Rolle-baserede og politisk baserede politikker for kontrol forbedrer beskyttelsen mod ondsindede brugere
"On-line bruger list" overvåger real-time status for hver enkelt bruger
Tillader session udløbet kontrol for On-demand brugere af tid og datamængde
Fleksibel Regnskab og fakturering

Programmerbare fakturering profiler tillade driftsledere at tilpasse fakturering planer for On-demand-brugere
Båndbredde styring gør det muligt klasse service for forskellige niveauer af brugere og maksimere fortjenesten
4ipnet RADIUS VSA (leverandørspecifikke attributter) gennemførelse tilføjer fleksibilitet til regnskabs-og session kontrol ved hjælp af RADIUS-serveren
Detaljeret per-bruger trafik historie log til analyse og registrering
Billing Rapporten giver en oversigt over transaktion optegnelser for On-demand-brugere.

Ring for pris nu

For at åbne en hotspot butik er på fingerspidser med HSG100 at forbinde til internettet røret via ADSL / Kabel / Satellit modem. HSG100 bringer også en ekstra fordel - den væg, støvtæt (IP50) metalkabinet.

Det HSG100 er den mest økonomiske endnu feature-rige Wireless Hotspot Gateway, rettet mod mini-size butikker, der ønsker at levere små, single-point trådløs internetadgang service. HSG100 er et perfekt valg for begyndere at køre hotspot virksomheder. Det koster ikke en formue at købe en bunke af udstyr, heller ikke tage de kvalifikationer hos en ekspert til at lime flere applikationer ud af flere freeware. For en selvstændig indehaver, der ejer en eller flere små butikker, der betjener trådløst internet service er ikke nogen magisk via HSG100. Mange auto-serviceværksteder og tandlægeklinikker finde en HSG100 i service gør deres kunders ventetid til en leg. Små coffee shops kan tilbyde tidsbaseret hotspot-tjeneste ved kompliment kuponer eller betales af timer ved lethed. For små professionelle kontorer, såsom regnskabs-eller advokatfirmaer, der kræver højt niveau netværkssikkerhed, giver en enkeltstående HSG100 kontorer at levere lykkedes Internet service til deres kunder eller besøgende i en isoleret mode, gratis, mens sikkert forhindre uautoriseret adgang til intranet.

Funktioner og fordele

Nem installation og betjening

Støtte til forskellige bredbåndstjenester installationsindstillinger (T1, DSL, Kabel) via statisk IP, DHCP og PPPoE
Integreret adgangspunkt gør det muligt for Wi-Fi adgang og eliminerer behovet for supplerende enhed
Indbygget brugerdatabasen giver tilstrækkeligt hensyn kapacitet til forskellige drift scenarier
Arbejde med øjeblikkelig konto generator til at give brugerkonti for besøgende-baserede, on-demand operationer
Integrerede sikkerhedsfunktioner

Standarder-baserede data kryptering og brugergodkendelse: WEP, WPA, WPA2, IEEE 802.1X
Sikker gæst og administrator adgang ved hjælp af web-baserede login og administration over SSL
Konfigurerbare pakkefiltrering politikker forbedre datatrafikken sikkerhed
Indbygget DoS beskyttelse forhindrer hackere i at kollapse netværket
Effektiv Bruger Management

Komplette autencitetsmekanisme blokke godkendte brugere at få adgang til netværket
Rolle-baserede og politisk baserede politikker for kontrol forbedrer beskyttelsen mod ondsindede brugere
"On-line bruger list" overvåger real-time status for hver enkelt bruger
Tillad session udløbet kontrol for On-demand brugere af tid
Fleksibel Regnskab og fakturering

Programmerbare fakturering profiler tillade driftsledere at tilpasse fakturering planer for On-demand-brugere
Båndbredde styring gør det muligt klasse service for forskellige niveauer af brugere og maksimere fortjenesten
Detaljeret per-bruger trafik historie log til analyse og registrering

Connector Type: N stik til NB / H jack
Impedans: 50Ω
Frekvensområde: DC ~ 6 GHz
VSWR:
1,17 på 2.19GHz
1,24 på 5.61GHz
Indsættelse Tab: 0.62dB max
0.297dB på 2.48GHz
0.614dB på 5.89GHz
DC Fordeling Spænding: 90V ± 20%
Isolationsmodstand:> 10.000 MOhm
Impulse Fordeling Spænding: 10kV min (1.2/50μS bølgeform)
Maks. Modstå Nuværende: 5KA min (8/20μS bølgeform)

Ved at støtte 802.1p/802.1Q QoS og 802.11e WMM sikrer EAP100 kvaliteten af ​​kommunikation for multimedia applikationer som stemme, lyd og video. Den dobbelte IEEE 802.3af PoE-kompatibelt design ikke kun giver både dataoverførsel og strømforsyning gennem den samme Ethernet-kabel, men Understøtter redundante tilslutningsmuligheder med failover-funktion.

Funktioner og fordele

High Speed ​​IEEE 802.11g og bagudkompatibel med 802.11b

Udstyret med en high-speed IEEE 802.11g trådløst netværk interface baseret på Atheros ™ chipset, transmissions-hastigheder på op til 54 Mbps
WDS repeater til Udvidelse af trådløs dækning

Opretter strukturelle WDS (bro eller Repeater), der forbinder til andre WDS-stand AP'er
Repeater links kan tjene som EAP100 LAN-forbindelser til at erstatte Ethernet-porte, eller blot bygge bro over den kablede side og den trådløse side som et enkelt netværk
Støtte til QoS & 802.11e WMM

Understøtter IEEE 802.1p/IEEE 802.1Q Quality of Service (QoS) tagging funktioner
Understøtter IEEE 802.11e Wireless Multi-Media (WMM) til at opfylde båndbredde tørstige multimedieapplikationer som stemme, lyd og video
Business-class WLAN Sikkerhed & Client Legaliseringer

Avancerede sikkerhedsindstillinger: 64/128/152 bit WEP, WPA/WPA2 med IEEE 802.1X eller PSK (Pre-Shared Key)
Wireless LAN-segmentering, Disable SSID Broadcast, og muligheden for at station-isolation
Evne til at blive konfigureres til at filtrere uautoriserede trådløse klienter med indbygget MAC-baseret adgangskontrol liste eller via en back-end RADIUS-serveren ved at sende en godkendelse efter anmodning
Support business-class WLAN-sikkerhed, multiple-SSID, og ​​VLAN-mærkning

Avancerede sikkerhedsindstillinger: 64/128/152 bit WEP, WPA/WPA2 med IEEE 802.1X eller PSK (Pre-Shared Key).
Understøtte flere ESSIDs og VLAN tagging.
MAC ACL liste & RADIUS klient støtte til at filtrere uautoriserede trådløse klienter.
Multiple Virtual APs & Funktion for Client Isolation

En EAP100 kan emulere op til 8 Virtual APS (VAP), hver med sin egen ESSID, nemlig kan man AP har 8 ESSIDs
Hver VAP ser ud til kunder som en selvstændig AP og dens trafik og være forbundet med en VLAN ID
Understøtter klient isoleret isoleret fra hinanden under en AP
Vægmontering Støvtæt Metal Housing

Indesluttet i et metalhus, varige og ikke-brandfare for det industrielle miljø
Dual-PoE med Link Failover

IEEE 802.3af Power over Ethernet (PoE) kompatibel design eliminerer behovet for stikkontakter, giver mulighed for installation af denne enhed i områder, hvor strømudtag ikke er let tilgængelige for at forbedre indførelsen fleksibilitet, og giver standard baseret kompatibilitet med andre enheder
Giver dobbelt-PoE 10/100 Fast Ethernet-porte med failover-funktion for redundant forbindelse

EAP300 kommer med alle de standarder, der efterspørges af virksomhedens applikationer, herunder business-grade sikkerhed (802.1X, WPA og WPA2), og flere ESSIDs med VLAN tags at adskille de trafikker i de forskellige afdelinger. Ud over de fælles forventninger, er EAP300 virkelige overraskelse patentanmeldte WES (Press-n-Connect) teknologi. Bridging flere EAP300s er ved at trykke på en knap med 4ipWES, som muliggør en hurtig og automatisk WDS Easy Setup ved at trykke på WES knappen på EAP300. Udvidelse af trådløst netværk dækning er en brise. Støtte på op til 300Mbps trådløs hastighed med 802.11n 3 x 3 MIMO-løsning, og en Gigabit Ethernet-interface, EAP300 er perfekt til båndbredde-krævende applikationer såsom video-overvågning, multi-media streaming over trådløst. Den QoS - WMM sikrer kvaliteten af ​​voice / video, når flere applikationer sender medier og data over luften samtidigt. EAP300 har højere gennemløb, sikkerhed og holdbarhed gør det til et perfekt valg af trådløs forbindelse til din virksomhed.

Funktioner og fordele

Dual-band 3 x 3 MIMO Field Replaceable Antenne & bagudkompatible med 802.11a/b/g

Antennen mangfoldighed design øger forbindelsen pålideligheden til at forbedre datatransmission kapacitet
Tre aftagelige high-gain antenner for optimal trådløs dækning og felt udskiftelig at imødekomme kundernes krav til specifikke miljø
Udstyret med en high-speed IEEE 802.11n/a/b/g trådløst netkort, transmission hastigheder op til 300Mbps
WDS / Repeater for at udvide trådløs dækning

Opretter strukturelle WDS (bro eller Repeater), der forbinder til andre WDS-stand AP'er
Repeater links kan tjene som EAP300 LAN-forbindelser til at erstatte Ethernet-porte, eller blot bygge bro over den kablede side og den trådløse side som et enkelt netværk
Støtte til QoS & 802.11e WMM

Understøtter IEEE 802.1p/IEEE 802.1Q Quality of Service (QoS) tagging funktioner
Understøtter IEEE 802.11e Wireless Multi-Media (WMM) til at opfylde båndbredde tørstige multimedieapplikationer som stemme, lyd og video
Business-class WLAN Sikkerhed & Client Legaliseringer

Avancerede sikkerhedsindstillinger: 64/128/152 bit WEP, WPA/WPA2 med IEEE 802.1X eller PSK (Pre-Shared Key)
Wireless LAN-segmentering, Disable SSID Broadcast, og muligheden for at station-isolation
4ipWES (Press-n-Connect) med trykknap muliggør hurtig / auto WDS link
Evne til at blive konfigureres til at filtrere uautoriserede trådløse klienter med indbygget MAC-baseret adgangskontrol liste eller via en back-end RADIUS-serveren ved at sende en godkendelse efter anmodning
Multiple Virtual APs & Funktion for Client Isolation

En EAP300 kan emulere op til 8 Virtual APS (VAP), hver med sin egen ESSID, nemlig kan man AP har 8 ESSIDs
Hver VAP ser ud til kunder som en selvstændig AP og dens trafik og være forbundet med en VLAN ID
Understøtter klient isoleret isoleret fra hinanden under en AP
Vægmontering Støvtæt Metal Housing

Indesluttet i et metalhus, varige og ikke-brandfare for det industrielle miljø
Gigabit Ethernet-port med PoE

IEEE 802.3af Power over Ethernet (PoE) kompatibel design eliminerer behovet for stikkontakter, giver mulighed for installation af denne enhed i områder, hvor strømudtag ikke er let tilgængelige for at forbedre indførelsen fleksibilitet, og giver standard baseret kompatibilitet med andre enheder
Giver 10/100/1000 Gigabit Ethernet-port, der matcher wire og trådløs gennemløb.

Det har de grænseflader til at tjene både trådløse og kabelforbundne LAN-adgang. Den simple men smarte design EAP700 gør det muligt at blande ind i en arbejdsgruppe eller et levende miljø, praktisk og elegant. Ved anvendelse PoE kommer EAP700 med fordel af at køre færre kabler i kanalen. Power over Ethernet (PoE) LAN-porten på EAP700 fungerer som strømforsyning samt det kablede netværk feed. Eventuelt kan det også få strøm via en AC-adapter, når PoE switch er ikke tilgængelig.

Standalone, EAP700 er en nem at installere og omkostningseffektiv løsning til de fleste indendørs trådløse installationer, herunder hotelværelser, lejligheder, kontorer, klasseværelser, biblioteker, private hjem, offentlige kiosker osv. Når man arbejder under en af ​​4ipnet controllere, det kombinerede netværk bliver til en intelligent bygning løsning, en administreret internet tjeneste, eller en Wi-Fi-hotspot-netværk af forskellige skalaer. Multi-pakke findes på lavere omkostninger til entreprenører / håndværkere til større installationer.

Funktioner og fordele

Skjult i-væggen bag frontplade, blande godt ind i det meste af interiør / arkitektonisk design

Ren og elegant look. Hovedenheden passer i en standardstørrelse udtagsdåsen skjult bag væggen-jack faceplate.
Frontpladen er en to-delt design, slide-stand til at justere dybden af ​​den del, der går i væggen-, og til dækning af fejl omkring cut-out hul.
Let at installere, færre kabler at køre, fleksible el-feed-indstillinger, forsamlet bygningsreglementer

IEEE 802.3af Power over Ethernet (PoE) eliminerer behovet for stikkontakter, som muliggør installation af denne enhed i områder, hvor strømudtag ikke er let tilgængelige for at forbedre indførelsen fleksibilitet.
Ved hjælp af et enkelt CAT5e kabel foder både strøm-og Ethernet-data. Valgfri AC strømforsyning er til rådighed.
Høj hastighed interface og QoS / WMM support, ideel til stemme, video og data applikationer

Udstyret med en kraftig, high-speed IEEE 802.11b / g trådløst interface og skjulte 2.4GHz antenne.
Med den ekstra QoS / WMM support, er EAP700 ideel til konvergerede stemme, video og data applikationer.
Tilslutninger for både trådløse og kabelforbundne klienter

Hold stilen af ​​et simpelt LAN væggen samtidig være i stand til at tjene både LAN og WLAN-enheder.
Support business-class WLAN-sikkerhed, multiple-SSID, og ​​VLAN-mærkning

Avancerede sikkerhedsindstillinger: 64/128/152 bit WEP, WPA/WPA2 med IEEE 802.1X eller PSK (Pre-Shared Key).
Understøtte flere ESSIDs og VLAN tagging.
MAC ACL list & RADIUS client support for filtering out unauthorized wireless clients.
Flexible deployment – standalone, or managed in an intelligent building solution

Stand-alone, EAP700 is a full AP (without router), normally chained from a modem router to service clients.
WDS links can be established to bridge other APs for extending WLAN coverage.
Supports client isolation, important in a hotspot or hospitality environment.
When managed under a 4ipnet Controller, such as the WHG-series, the combination has been pre-integrated to provide solutions for many applications.

When operating in CPE (Client) mode, it functions as a Wi-Fi modem gateway to receive wireless signal over the last-mile Internet feed from WISPs. The CPE's bandwidth to the Internet can be assigned by the WISP. When in AP mode, OWL510 operates as an AP station with wall-penetrating high-power signal and long-range coverage to better serve Wi-Fi clients. In addition, it can be set up as a WDS-mesh node by establishing multiple WDS links to bridge neighbor access points together. Coming with business-class security, OWL510 in AP mode is also ideal for enterprise applications. Furthermore, one OWL510 with multiple SSIDs is capable of acting as multiple Virtual APs (VAPs). By tagging the traffic from each VAP with a unique VLAN ID, it allows for segmenting a corporate network using VLANs to protect critical resources. Being a versatile Wi-Fi device, OWL510 does not limit itself to outdoor usage only. When managed by a Controller (such as the WHG-series), it performs as a Wi-Fi base station in either a public or private wireless access deployment.

Features & Benefits

Rugged, Compact-Sized, and Adaptive to Versatile Environments

Diversified deployments:
Municipal Wi-Fi service
Home Ower Association (HOA), RV parks, and recreation resorts
Hotels, mobile hospitals, and mobile libraries
Shopping malls, airports, harbors, roadways, warehouse, and manufacturing plants
IP68 weather- and water-proof
Housed in durable, rust-resistant metal casing
High Transmit Power and Built-in Patch Antenna

Up to 500mW output power from the board to transmit stronger signals for longer range
Built-in patch antenna for installation convenience and efficiency
LED indicators to display wireless signal strength
High-speed with QoS for Voice, Video, and Data Applications

Equipped with a high-speed IEEE 802.11g wireless network interface based on Atheros™ chipset, transmit rates up to 54Mbps
Backward compatible with 802.11b
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty triple-play (voice, video, and data) applications
Power over Ethernet (PoE) & Flexible Mounting Options

PoE feature reduces the need of additional power cable to the device; a quality Power Supply Equipment (PSE) is bundled in the package
Wall and pole mountable; mounting kit included
Multiple Operation Modes for Different Infrastructures

Two administrator accounts – one for WISP to manage wireless broadband subscribers
Multiple operation modes:
CPE Mode – wireless modem with IP sharing
AP Mode – pure AP
WDS Mode – AP with wireless bridge
Universal Repeater Mode – with MAC NAT
Business-class Security and Multiple-SSID/ VLAN tagging Support

Full range of enterprise-grade wireless security mechanisms such as WEP, WPA and WPA2 (802.11i)
Multiple-SSID capability enables one OWL510 to behave like up to 8 unique Virtual APs (VAPs), the equivalent of 8 wireless Virtual LANs (VLANs) to securely segment wireless network traffic
Support client isolation in public hotspot operation.

When operating in CPE (Client) mode, it functions as a Wi-Fi modem gateway to receive wireless signal over the last-mile Internet feed from WISPs. The CPE's bandwidth to the Internet can be assigned by the WISP. When in AP mode, OWL510 operates as an AP station with wall-penetrating high-power signal and long-range coverage to better serve Wi-Fi clients. In addition, it can be set up as a WDS-mesh node by establishing multiple WDS links to bridge neighbor access points together. Coming with business-class security, OWL510 in AP mode is also ideal for enterprise applications. Furthermore, one OWL510 with multiple SSIDs is capable of acting as multiple Virtual APs (VAPs). By tagging the traffic from each VAP with a unique VLAN ID, it allows for segmenting a corporate network using VLANs to protect critical resources. Being a versatile Wi-Fi device, OWL510 does not limit itself to outdoor usage only. When managed by a Controller (such as the WHG-series), it performs as a Wi-Fi base station in either a public or private wireless access deployment.

Features & Benefits

Rugged, Compact-Sized, and Adaptive to Versatile Environments

Diversified deployments:
Municipal Wi-Fi service
Home Ower Association (HOA), RV parks, and recreation resorts
Hotels, mobile hospitals, and mobile libraries
Shopping malls, airports, harbors, roadways, warehouse, and manufacturing plants
IP68 weather- and water-proof
Housed in durable, rust-resistant metal casing
High Transmit Power and Built-in Patch Antenna

Up to 500mW output power from the board to transmit stronger signals for longer range
Built-in patch antenna for installation convenience and efficiency
LED indicators to display wireless signal strength
High-speed with QoS for Voice, Video, and Data Applications

Equipped with a high-speed IEEE 802.11g wireless network interface based on Atheros™ chipset, transmit rates up to 54Mbps
Backward compatible with 802.11b
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty triple-play (voice, video, and data) applications
Power over Ethernet (PoE) & Flexible Mounting Options

PoE feature reduces the need of additional power cable to the device; a quality Power Supply Equipment (PSE) is bundled in the package
Wall and pole mountable; mounting kit included
Multiple Operation Modes for Different Infrastructures

Two administrator accounts – one for WISP to manage wireless broadband subscribers
Multiple operation modes:
CPE Mode – wireless modem with IP sharing
AP Mode – pure AP
WDS Mode – AP with wireless bridge
Universal Repeater Mode – with MAC NAT
Business-class Security and Multiple-SSID/ VLAN tagging Support

Full range of enterprise-grade wireless security mechanisms such as WEP, WPA and WPA2 (802.11i)
Multiple-SSID capability enables one OWL510 to behave like up to 8 unique Virtual APs (VAPs), the equivalent of 8 wireless Virtual LANs (VLANs) to securely segment wireless network traffic
Support client isolation in public hotspot operation.

Its dual Power over Ethernet (PoE) ports provides redundant power feeds to increase power supply availability. Hardware Flexibility for Networking and Multi-Radio, External Antenna Connectors. Hardware wise, a single OWL800 is capable of hosting 2-4 multiple radio modules simultaneously. Each module can be used for serving wireless clients, building wireless bridges, or establishing wireless backhauls. For some countries that permit high-power transmission, higher power modules are optionally available. There are 4 N-type antenna connectors extended from the modules on the OWL800 board, which not only gives the flexibility in choosing antennas but greatly simplifies the antenna installation. Software Flexibility for Networking.

Multi-Mode, Multi-Link. AP, Bridge/Mesh Node, Gateway. To support diversified wireless network architectures, the OWL800 provides multiple operating modes, including Point-to-Point Bridge, Point-to-Multipoint Bridge, AP station and AP Gateway. Unlike most of common access points that rely on a single radio for different purposes at one time, the OWL800 with multiple radio modules receives and transmits over-the-air signals for each bridge link or AP station with one dedicated wireless radio to prevent degraded performance.

Features & Benefits

Rugged for Outdoor or Harsh Environment

Weatherproof and watertight cast-metal housing with an IP68 rating
Surge immunity up to 15KV
Dual PoE for redundant power input and data link
Support multiple operation modes – Gateway mode, AP mode, and Relay mode
Multiple Radios and Antenna Connectors, Flexible for PtP, PtMP, or Mesh networks

To indbyggede 802,11 a / b / g radio med to ekstra mini-PCI slots til udvidelse
High Power Radio moduler er tilgængelige muligheder for de lande, hvor højere kraftoverførende er tilladt
Low-loss N-type stik giver mulighed for mere fleksible antenne valg for professionelle
Antenner kan monteres direkte på OWL800, eller forbundet tæt til OWL800, for at reducere signal tab
To bånd (2.4G og 5G) med flere kanaler giver mulighed for bedre kanal planlægning for at undgå interferens
Hvert Radio modul kan konfigureres som AP eller WDS uafhængigt. Op til fire moduler kan tjene på en OWL800
Indbygget AAA og User Management for Hotspot Operation

Støtte indbygget Lokale regnskaber og On-demand-regnskab for brugergodkendelse
Støtte flere eksterne RADIUS-servere til brugergodkendelse
Support UAM og IEEE802.1x adgangskontrol funktioner
Indbygget Hotspot adgangskontrol og fakturering funktioner
Robust og pålidelig trådløs Link Construction

Dobbelt PoE effekt
Støtte 8 WDS links per 802.11a/b/g radiomodul
WDS opdagelse og link for nem tilslutning
Support VLAN tags via trådløs inter-AP forbindelser (WDS) ud over de trådløse forbindelser fra klienter til AP
Dynamisk trådløst link backup for netpålideligheden
Dedikeret WDS radioer kunne danne en maske WLAN uden at tage væk nogle båndbredde til servering kunder
Trådløs sikkerhed og QoS Support

Avancerede sikkerhedsindstillinger: 64/128/152 bit WEP, WPA/WPA2 med IEEE 802.1X eller Pre-Shared Key
Support kryptering, herunder WEP, AES eller TKIP over trådløs inter-AP forbindelser (WDS)
Wireless LAN-segmentering, Disable SSID Broadcast
Støtte klient-isolation, så kunderne er isoleret fra hinanden under en AP
Støtte QoS tags via trådløs inter-AP forbindelser (WDS)
Support IEEE 802.11e Wireless Multi-Media (WMM) til at opfylde båndbredde tørstige multimedie applikationer såsom tale, lyd og video
Fremragende løsning for EU-WLAN

Hvert AP modul er i stand til at efterligne op til 8 virtuelle APS (VAPS) samtidig
Med kapaciteter flere SSID og VLAN tag forening, giver OWL800 udstyr-deling mellem de forskellige franchise, i øvrigt, dens QoS funktion gør det muligt differentierede service-operationer
Flere OWL800 s kan håndteres i henhold til en ekstern WLAN controller til at danne en styret WLAN løsning.

ANT-OD-242505M 2.4GHz - 2.5GHz 5dBi Mesh Omni-Directional Antenna
Frekvensområde: 2.4GHz - 2.5GHz
Antenne Gain: 5dBi
Polarisering: Lodret, Omni-directional
VSWR: ≤ 1,5: 1
Max Input Power: 50 watt
Vertikal strålevidde: 20 grader
Horisontal strålevidde: 360 grader
Impedans: 50 ohm
Dimension: 330mm (L) x 17mm (D)
Vægt: 85g
Connector Type: N-Type Mand
Kabinet Materiale: Glasfiber
Arbejdstemperatur: -40 ° C til 80 ° C

• Frequency Range: 5.1Ghz – 5.9Ghz
• Antenna Gain: 8dBi
• Polarization: Vertical, Omni-Directional
• VSWR: < 1.5 : 1
• Maximum Input Power: 50 watts
• Vertical Beamwith: 17 degrees
• Horizontal Beamwidth: 360 degrees
• Impedance: 50 ohms
• Dimension: 375mm(L) x 17mm(D)
• Weight: 200g
• Connector Type: N-Type Male
• Housing Material Fiberglass
• Operating Temperature -40°C to +80°C

With more powerful hardware, WHG401 is capable of centrally managing 190 access points (150 x EAP700 + 40 x other 4ipnet single radio AP) to cover a wider service area in a smaller network.

Simplified Deployment and Reliable Internet Connection
Gigabit Ethernet to meet higher data rate demands of larger networks
Easy to deploy, highly scalable platform allows overlay with existing wired/wireless infrastructure without disruption
Load balancing and WAN failover enhance bandwidth utilization and provide more reliable Internet connection
Powerful Network Security Capabilities for Enterprise Applications
Standards-based data encryption: WEP, WPA, WPA2, IEEE 802.1X, and IPSec VPN
Secure guest and administrator access using web-based login and administration over SSL
Diverse user authentication methods, including built-in Local and On-demand database; supports external authentication servers including POP3, LDAP, RADIUS, Windows Domain, and SIP registrar
Built-in DoS protection keeps malicious hackers from collapsing the network
Site-to-site VPN tunnels allow branch offices to securely connect with one another and share the same account database
Comprehensive Access Control and User Management
Role-based access control and policy enforcement offer management of privileges for different user groups
On-demand account generation provides secure and managed user accounts to visitors
Service Zone function partitions a physical network into up to 9 virtual networks, each with its own definable access control and group policy profiles. Allows hotspot owners to provide various levels of customized services
Individual user bandwidth limit enables flexible traffic control for different scenarios
Centralized Access Point (AP) Management
Centralized remote control and automatic AP discovery
Management and monitoring of managed APs via web-based administration interface, including AP's system settings, online status, enabling/disabling, reset, and firmware upgrade
Periodically monitors APs and notifies the administrator of problematic APs
Flexible Accounting and Easy Billing
Configurable billing profiles allow operators to customize billing plans for on-demand users
Support online payment with credit card through Authorize.net, PayPal and SecurePay
Support for Location-Based Hotspot Services and Customizable UAM Web Pages
The logical concept of Service Zone allows the Controller to differentiate clients by locations and to provide different user experiences (such as different login pages) and network policies
When coupling with VLAN switches and DSLAM devices, the Controller can use its Port Mapping feature to tell the location of each client and therefore provide differentiated services. For example, a hotel guest would not need to type in the password again every time when accessing the Internet in room
By setting up multiple Service Zones and utilizing customized pages or external pages, a single Controller can serve multiple hotspot franchises transparently to the clients
PMS Integration for Hotel Applications
By interfacing the 3rd party middleware – NetRetriever, the controller is able to post billing information to multiple kinds of hotel PMSs, including Micros Fidelio/Opera, HiRUM, RMS, CMS Hospitality, EzyRez, RoomMaster2000, Charts and etc
A hotel guest can obtain an Internet access account at check-in counter, or sign up for the Internet access service in room anytime without the help of clerks. With PMS integration, the guest will receive a single room bill
With a single account, a guest will be able to access the Internet by wire in room or by wireless connection anywhere within the service range of APs connecting to the Controller

Call for Price Now

WHG505 is capable of centrally managing 230 access points (150 x EAP700 + 80 x other 4ipnet single radio AP) to cover a wider service area in a smaller network.

WHG505 – Secure WLAN Controller
Simplified Deployment and Reliable Internet Connection
Gigabit Ethernet to meet higher data rate demands of larger networks
Easy to deploy, highly scalable platform allows overlay with existing wired/wireless infrastructure without disruption
Load balancing and WAN failover enhance bandwidth utilization and provide more reliable Internet connection
Powerful Network Security Capabilities for Enterprise Applications
Standards-based data encryption: WEP, WPA, WPA2, IEEE 802.1X, and IPSec VPN
Secure guest and administrator access using web-based login and administration over SSL
Diverse user authentication methods, including built-in Local and On-demand database; supports external authentication servers including POP3, LDAP, RADIUS, Windows Domain, and SIP registrar
Built-in DoS protection keeps malicious hackers from collapsing the network
Site-to-site VPN tunnels allow branch offices to securely connect with one another and share the same account database
Comprehensive Access Control and User Management
Role-based access control and policy enforcement offer management of privileges for different user groups
On-demand account generation provides secure and managed user accounts to visitors
Service Zone function partitions a physical network into up to 9 virtual networks, each with its own definable access control and group policy profiles. Allows hotspot owners to provide various levels of customized services
Individual user bandwidth limit enables flexible traffic control for different scenarios
Centralized Access Point (AP) Management
Centralized remote control and automatic AP discovery
Management and monitoring of managed APs via web-based administration interface, including AP's system settings, online status, enabling/disabling, reset, and firmware upgrade
Periodically monitors APs and notifies the administrator of problematic APs
Flexible Accounting and Easy Billing
Configurable billing profiles allow operators to customize billing plans for on-demand users
Support online payment with credit card through Authorize.net, PayPal and SecurePay
Support for Location-Based Hotspot Services and Customizable UAM Web Pages
The logical concept of Service Zone allows the Controller to differentiate clients by locations and to provide different user experiences (such as different login pages) and network policies
When coupling with VLAN switches and DSLAM devices, the Controller can use its Port Mapping feature to tell the location of each client and therefore provide differentiated services. For example, a hotel guest would not need to type in the password again every time when accessing the Internet in room
By setting up multiple Service Zones and utilizing customized pages or external pages, a single Controller can serve multiple hotspot franchises transparently to the clients
PMS Integration for Hotel Applications
By interfacing the 3rd party middleware – NetRetriever, the controller is able to post billing information to multiple kinds of hotel PMSs, including Micros Fidelio/Opera, HiRUM, RMS, CMS Hospitality, EzyRez, RoomMaster2000, Charts and etc
A hotel guest can obtain an Internet access account at check-in counter, or sign up for the Internet access service in room anytime without the help of clerks. With PMS integration, the guest will receive a single room bill
With a single account, a guest will be able to access the Internet by wire in room or by wireless connection anywhere within the service range of APs connecting to the Controller

Call for Price Now

EAP200 makes the wireless communication fast, secure and easy. It supports business grade security such as 802.1X, and Wi-Fi Protected Access (WPA and WPA2). By pushing a purposely built button, 4ipWES (Press-n-Connect) feature makes it easy to bridge wireless links of multiple EAP200s for forming wider wireless network coverage. EAP200 also features multiple ESSIDs with VLAN tags; one EAP200 can emulate up to eight Virtual APs, great for enterprise applications, such as separating the traffics of different departments using different ESSIDs.

Supporting up to 300Mbps wireless speed with its 802.11n 2 x 2 MIMO solutions, EAP200 is perfect for bandwidth-hungry applications such as video surveillance, multimedia streaming over the wireless links. Its QoS – WMM feature ensures the quality of voice/ video when multiple applications are transmitting media and data over the air at the same time.

EAP200's higher throughput, security and durability make it a perfect choice of wireless connectivity for your applications.

2.4GHz 2 x 2 MIMO Field Replaceable Antenna & Backward Compatible with 802.11n/b/g
The antenna diversity design enhances the connection reliability to improve data transmission capability
Two detachable antennas for optimal wireless coverage and field replacement flexibility
Equipped with a high-speed IEEE 802.11n/b/g wireless network interface, transmission rates up to 300Mbps
WDS/Repeater for Extending Wireless Coverage
4ipWES (Press-n-Connect) with push button enables quick/auto WDS link
Creates structural WDS (Bridge or Repeater) links connecting to other WDS-capable APs
WDS links can serve as EAP200′s LAN connections to replace Ethernet ports, or simply bridge the wired side and the wireless side as a single network
Supporting QoS & 802.11e WMM
Supports IEEE 802.1p/IEEE 802.1Q Quality of Service (QoS) tagging features
Supports IEEE 802.11e Wireless Multi-Media to fulfill bandwidth thirsty triple-play (voice, audio and video) applications
Business-class WLAN Security & Client Authentications
Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key)
Wireless LAN segmentation, Disable SSID Broadcast and the option of station-isolation
Configuration-capable to filter out unauthorized wireless clients with build-in MAC-based access control list or via a back-end RADIUS server by sending an authentication request
Multiple Virtual APs & Capability of Client Isolation
One EAP200 can emulate up to 8 Virtual APs (VAP), each with its own ESSID; namely, one AP can have 8 ESSIDs.
Each VAP appears to clients as an independent AP and its traffic and be associated with a VLAN ID.
Supports client isolation, isolated from each other under one AP
Wall mountable Dust-proof Metal Housing
Enclosed in a metal housing, durable and non-fire hazard for the industrial environment
Dual-PoE with Link Failover
The IEEE 802.3af Power over Ethernet (PoE) compliant design eliminates the need for power sockets, allows installation of this device in areas where power outlets are not readily available to improve deployment flexibility, and provides standard based compatibility with other device
Provides dual-PoE 10/100 Fast Ethernet ports with failover function for redundant connectivity.

OWL400 supports multiple operation modes (AP/Bridge/CPE) and works well as a last-mile solution for wireless ISPs (WISPs). When in AP mode , OWL400 operates as an AP station with wall-penetrating high-power signal and long-range coverage to better serve Wi-Fi clients. In addition, it can be set up as a WDS node by establishing multiple WDS links to bridge neighbor access points together.

Coming with business-class security, OWL400 in AP mode is also ideal for enterprise applications. Furthermore, one OWL400 with multiple SSIDs is capable of acting as multiple Virtual APs (VAPs). By tagging the traffic from each VAP with a unique VLAN ID, it allows for segmenting a corporate network using VLANs to protect critical resources.

When operating in CPE (Client) mode , it functions as a Wi-Fi modem gateway to receive wireless signal over the last-mile Internet feed from WISPs. The CPE's bandwidth to the Internet can be assigned by the WISP.

Being a versatile Wi-Fi device, OWL400 does not limit itself to outdoor usage only. When managed by a Controller (such as the WHG-series), it performs as a Wi-Fi base station in either a public or private wireless access deployment.

Rugged, Compact-Sized, and Adaptive to Versatile Environments
Diversified deployments:
Municipal Wi-Fi service
Home Owner Association (HOA), RV parks, and recreation resorts
Hotels, mobile hospitals, and mobile libraries
Shopping malls, airports, harbors, roadways, warehouse, and manufacturing plants
IP68 weather- and water-proof, housed in durable, rust-resistant metal casing
High Transmit Power and N-type Connector
Up to 200mW output power from the board to transmit stronger signals for longer range
N-type connector allows for choosing suitable antenna types and gains with flexibility
High-speed with QoS for Voice, Video, and Data Applications
Equipped with a high-speed IEEE 802.11n/a chipset, supporting transmit rate up to 300Mbps
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty triple-play (voice, video, and data) applications
Power over Ethernet (PoE) & Flexible Mounting Options
PoE feature reduces the need of additional power cable to the device; a quality Power Supply Equipment (PSE) is bundled in the package
Wall and pole mountable; mounting kit included
Multiple Operation Modes for Different Infrastructures
Two administrator accounts – one for WISP to manage wireless broadband one for subscribers
Multiple operation modes:
AP Mode – pure AP
WDS Mode – AP with wireless bridge
Universal Repeater Mode – with MAC NAT
CPE Mode – wireless modem with IP sharing
Business-class Security and Multiple-SSID/ VLAN tagging Support
Full range of enterprise-grade wireless security mechanisms such as WEP, WPA and WPA2 (802.11i)
Multiple-SSID capability enables one OWL400 to behave like up to 7 unique APs, the equivalent of 7 wireless Virtual LANs (VLANs) to securely segment wireless network traffic
Support client isolation in public hotspot operation

The IP68-rated metal sealed CPE100 is compact in size and weatherproof. Coming with a mounting kit, it can be mounted on a pole or wall. It is suitable for both indoor and outdoor usage with its 200mW output power.

The CPE 100 can be deployed in various environments, for example:

• Outdoor access point for school campuses, enterprise campuses, or manufacture plants.
• Wireless CPE for MDU/ MTU, such as apartments, dormitories, and office complexes.
• Indoor access point for hotels, factories, or warehouses where metal industrial grade devices are preferred.
• Public hotspot operation for café, parks, convention centers, shopping malls, or airports.
• Wireless coverage for both indoor and outdoor ground for private resorts, acre estate/home's yards, or golf course communities.

A WISP Deployment Example

Acts as a “Wireless Modem” to bring wireless bandwidth to home and office buildings.
Wireless Bandwidth Allocation (uplink/downlink) delivered to each building depending on different subscription plans.
Full range of wireless security mechanisms such as WEP, WPA and WPA2 (802.11i) that are important for enterprise wireless deployments.
Acts as a Home Router for IP Sharing and firewall, all-in-one installation solution.
Weatherproof and watertight from its rugged aluminum housing (IP68 Approved).
Power over Ethernet (PoE) built-in for single cable installation.
On board Ethernet surge protection.
Multi-mode Support:
CPE Mode
AP Mode
WDS Mode
Universal Repeater (Bridge) Mode

The IP68-rated metal sealed CPE110 is compact in size and weatherproof. Coming with a mounting kit, it can be mounted on a pole or wall. It is suitable for both indoor and outdoor usage with its 200mW output power.

The CPE 100 can be deployed in various environments, for example:

• Outdoor access point for school campuses, enterprise campuses, or manufacture plants.
• Wireless CPE for MDU/ MTU, such as apartments, dormitories, and office complexes.
• Indoor access point for hotels, factories, or warehouses where metal industrial grade devices are preferred.
• Public hotspot operation for café, parks, convention centers, shopping malls, or airports.
• Wireless coverage for both indoor and outdoor ground for private resorts, acre estate/home's yards, or golf course communities.

A WISP Deployment Example

Acts as a “Wireless Modem” to bring wireless bandwidth to home and office buildings.
Wireless Bandwidth Allocation (uplink/downlink) delivered to each building depending on different subscription plans.
Full range of wireless security mechanisms such as WEP, WPA and WPA2 (802.11i) that are important for enterprise wireless deployments.
Acts as a Home Router for IP Sharing and firewall, all-in-one installation solution.
Weatherproof and watertight from its rugged aluminum housing (IP68 Approved).
Power over Ethernet (PoE) built-in for single cable installation.
On board Ethernet surge protection.
Multi-mode Support:
CPE Mode
AP Mode
WDS Mode
Universal Repeater (Bridge) Mode

Feature-packed for hotspot operation, HSG200 comes with built-in 802.11n/b/g access point, web server and web pages for clients to login, easy logo-loading for branding a hotspot store, simple user/visitor account management tool, payment plans, PayPal credit card gateway, traffic logs, IP sharing and etc. Equipped with 4ipWES (Press-n-Connect) technology, the HSG200 is able to establish an automatic WDS link with up to 2 access points at the touch of a button. Extending wireless network coverage is a breeze. To open a hotspot store is at finger tips with HSG200 connecting to the Internet pipe via ADSL/Cable/Satellite modem. HSG200 also brings in an extra advantage – the wall-mountable, dust-proof (IP50) metal housing.

For a self-proprietor who owns one or several small shops, serving wireless internet service is no magic via HSG200. Many auto-service shops and dental clinics find an HSG200 in service makes their customers' waiting time a breeze. Small coffee shops can offer time-based hotspot service by compliment coupons or paid by hours at ease. For small professional offices such as accounting or law firms who demand high-level network security, a standalone HSG200 enables the offices to provide managed Internet service to their clients or visitors in an isolated fashion, free of charge, while securely preventing unauthorized access to the intranet.

2.4GHz 2 x 2 MIMO Field Replaceable Antenna & Backward Compatible with 802.11n/b/g

* The antenna diversity design enhances the connection reliability to improve data transmission capability.
* Two detachable antennas for optimal wireless coverage and field replacement flexibility.
* Equipped with a high-speed IEEE 802.11n/b/g wireless network interface, transmission rates up to 300Mbps.

Easy Installation and Operation

* Support various broadband deployment options (T1, DSL, Cable) via static IP, DHCP and PPPoE.
* Integrated access point enables Wi-Fi access and eliminates the need for additional device.
* Built-in user database provides sufficient account capacity for different operation scenarios.
* Work on-demand account generator to provide user accounts for visitor-based, on-demand operations.

Integrated Security Features

*Standards-based data encryption and user authentication: WEP, WPA, WPA2, IEEE 802.1X.
* Secure guest and administrator access using web-based login and administration over SSL.
* Configurable packet filtering policies enhance data traffic security
4ipWES (Press-n-Connect) with push button enables quick/auto WDS link.
* Built-in DoS protection prevents malicious hackers from collapsing the network.

Effective User Management

* Complete authentication mechanism blocks unauthenticated users from gaining access to the network.
* Role-based and policy-based control policies enhances the protection against malicious users.
* “On-line user list” monitors real-time status of each individual user.
* Allow session expiration control for On-demand users by time basis.

Flexible Accounting and Billing

* Programmable billing profiles allow operators to customize the billing plans for On-demand users.
* Bandwidth control enables class of service for different levels of users and maximize profits.
* Detailed per-user traffic history log for analysis and record keeping.

The 4ipnet HSG200-P Wi-Fi Hotspot Kit is a cost-effective yet feature-packed all-in-one solution ready for hotspot operation right out of the box. It is the most economical solution for mini-scale hotspot business. The compact HSG200 Wireless Hotspot Gateway, featuring IEEE 802.11n/b/g, 2×2 MIMO, Power over Ethernet (PoE), and IP50 dust-proof metal housing, specially targets mini-size stores who want to provide small, single-point wireless Internet access service. With built-in user database and customizable billing plans, it enables account generation on demand at the cashier's desk. Network expansion is straightforward with the HSG200; hotspot owners who wish to extend wireless coverage can do so with the simple touch of a button-with 4ipnet's proprietary technology, 4ipWES Press-n-Connect for WDS Easy Setup, the HSG200 automatically establishes an AES encrypted connection with 4ipnet access points, effortlessly and securely expanding the network.

The 4ipnet NetTicketGen Hotspot Network Ticket Generator, consisting of SDS100 Smart Device Server and PRT100 POS Printer, streamlines on-demand account creation and billing processes through push-button account generation and receipt ticket printing. The SDS100 generates on-demand accounts by triggering the billing plans in the HSG200 and instructs the PRT100 to print corresponding account tickets. Frontline hotspot operation is immediately simplified; receptionists and cashiers can provide customers or visiting guests with access receipts by pressing a few buttons on SDS100, bypassing manual configuration of the Gateway. All 4ipnet WHG/HSG devices are compatible and integrate easily with the NetTicketGen; Each WHG/HSG device can simultaneously support multiple NetTicketGen sets through the local network.

Making a bit of cash on the side!

Keep your customers and guests happy, while making a bit of cash on the side, by providing them with WiFi internet access. A WiFi ticketing system can take care of everything from billing to security. Is the HSG200 + SDS100 system from little-known firm 4ipnet good enough for your business? Read our review to find out.

4ipnet's HSG200 wireless hotspot and ticketing kit is a considerably more serious-looking pair of products then Zyxel's competing ticketing system . It looks more businesslike with an understated black finish. The kit includes the HSG200 router and the SDS100 ticketing controller, to which you connect the provided thermal ticket printer using the included RS-232 cable. Both the HSG200 and SDS100 are ruggedised, with steel cases and mounting points to make them easy to secure to a wall or desk. Even the ticket printer has a reassuringly solid feel to it.

The main HSG200 unit is a relatively simple router with a WAN port, 2.4GHz 300Mbit/s 802.11n wireless and two 10/100Mbit/s LAN ports – one for your private network and one for your public network. More importantly, as well as simultaneous private and public networks, it has a lot of extra options that help you control the ticketing system, pricing and payment processing if you want to allow users to purchase access by debit or credit card.

The SDS100 has buttons allowing you to select from up to ten different ticket plans – the pricing and duration of each plan can be configured to suit your needs. You can connect multiple ticketing units to a single HSG200 router, allowing tickets to be sold from multiple tills or locations, but you'll need to connect them via an Ethernet switch to the single private network LAN port.

Basic setup and configuration was gratifyingly simple, although the single private LAN port makes it slightly more complicated than it has to be. If you don't have a switch, it's advisable to sort out the router's initial configuration via a LAN connection before you connect the ticketing console.

Once you've run through the router's simple web-based configuration wizard and connected the SDS100 to the private LAN port, the system is immediately functional, albeit in a basic way. Of course, further configuration is absolutely necessary, like setting up your desired security settings for both public and private wireless networks – we suggest WPA2 for the private network and open for the public one – you can carry out further configuration wirelessly with ease.

A basic firewall allows you to control traffic in and out of the public network, which is of primary importance. A routing table allows you to configure your NAT settings for more complicated routing, but we would recommend giving a guest access system of this kind its own dedicated internet connection without access to the rest of your network, rather than using the HSG200 to handle all your public and secure private routing requirements.

Alongside these features is a nicely implemented Quality of Service (QoS) system, which allows you define maximum up and downstream connection speeds for a few different kinds of traffic, such as video and voice. There's also support for various DDNS providers, although we don't recommend enabling remote access to the device unless absolutely necessary, as well as a few network inspection and status tools.

The HSG200′s most important features are handled in its Users menu, where clear sub-menus make it easy to assign different types of access ticket to each of the HSG200′s 10 options. Tickets can be defined with different durations and prices; you can also choose to have them expire at certain times and even upload a logo image to be printed on your tickets. If you set up an external payment gateway, guests can pay for access on their credit card when they log on to your network, rather than having to buy a ticket in person at the till. Payment can be processed via Authorize.Net, PayPal, SecurePay or WorldPay.