Merkmale

1.Actual erreichbar Tests Reichweite von bis zu 50 km
2.High Durchsatz von bis zu 40Mbps
3.Support Bridge (PTP, PTMP)
4.High Sicherheit (AES)
5.Ease der Installation (Echtzeit-Link Test für lokale und Remote RSSI)
6.Transmit Power Control
7.Bandwidth Steuerung (40/20/10/5 MHz)
8.Wireless TDMA (TDD-Modus)
9.VLAN Pass-Through
10.IP67 bewertet Wasserdicht Metall Outdoor Gehäuse mit Design-Vent

Technische Daten

Funk
Standard-Proprietary
Frequenzband 5120 ~ 6060MHz
Modulation 64QAM 3/4, 64-QAM-2/3, 16-QAM 3/4, 16-QAM 1/2, QPSK 3/4, QPSK 1/2, BPSK 3/4, BPSK 1/2
Datenrate bis zu 40Mbps Umkreis von 50 km
Kanalbandbreite 5/10/20 MHz
Sicherheit WEP / AES-Verschlüsselung
Empfindlichkeit -92 dBm
Ausgangsleistung 23dBm
Transmit Power Control 5 Stufen
Betriebsart Bridge (PTP, PTMP)

Software-Eigenschaften DFS

Link-Test Tool (Real Time Local und Remote RSSI)
Spanning Tree (STP)
802.1Q VLAN durchlaufen
NTP-Client

Management

Web-basiertes Management
Remote-Firmware-Upgrade
SNMP V2 (Private MIB, 802.11 MIB)
CLI
Backup / Restore
System Log
Remote Log Server
Hardware-Watch Dog

Hardware

Prozessor Intel IXP422 266MHz Atheros2414
Flash 16MB SDRAM 32MB
LED-Anzeigen Power, Ethernet, Wireless, RSSI (5 LEDs)
Antennenanschluss 1 x ntype Anschluss

Ethernet

10/100BASE-TX Auto-Negotiation-Ethernet-Anschluss x 1 (RJ-45 Anschluss)
Auto MDI / MDI-X-fähigen, IEEE 802.3af Power over Ethernet kompatibel

Umwelt

Betriebstemperatur: -30 ° C ~ 80 ° C
Lagertemperatur: -30 ° C ~ 85 ° C
Luftfeuchtigkeit: 100% (nicht kondensierend)
Power Supply 802.3af PoE, 48V 0,35 A
Wasserdicht
IP67 Zertifiziert
Montage-Wandhalterung, Stativflansch, Optional Masthalter für Lichtmast
Abmessungen 259 (L) x 250 (B) x 75 (H) mm

Merkmale

1.Actual erreichbar Tests Reichweite von bis zu 50 km
2.High Durchsatz von bis zu 40Mbps
3.Support Bridge (PTP, PTMP)
4.High Sicherheit (AES)
5.Ease der Installation (Echtzeit-Link Test für lokale und Remote RSSI)
6.Transmit Power Control
7.Bandwidth Control (5/10/20 MHz)
8.Wireless TDMA (TDD-Modus)
9.VLAN Pass-Through
10.IP67 bewertet Wasserdicht Metall Outdoor Gehäuse mit Design-Vent

Technische Daten

Funk
Standard-Proprietary
Frequenzbereich 2412-2472MHz
Modulation 64QAM 3/4, 64-QAM-2/3, 16-QAM 3/4, 16-QAM 1/2, QPSK 3/4, QPSK 1/2, BPSK 3/4, BPSK 1/2
Datenrate bis zu 40Mbps Umkreis von 50 km
Kanalbandbreite 5/10/20 MHz
Sicherheit WEP / AES-Verschlüsselung
Empfindlichkeit -92 dBm
Ausgangsleistung 23dBm
Transmit Power Control 5 Stufen
Betriebsart Bridge (PTP, PTMP)

Software-Eigenschaften DFS

Link-Test Tool (Real Time Local und Remote RSSI)
Spanning Tree (STP)
802.1Q VLAN durchlaufen
NTP-Client

Management

Web-basiertes Management
Remote-Firmware-Upgrade
SNMP V2 (Private MIB, 802.11 MIB)
CLI
Backup / Restore
System Log
Remote Log Server
Hardware-Watch Dog

Hardware

Prozessor Intel IXP422 266MHz Atheros2414
Flash 16MB SDRAM 32MB
LED-Anzeigen Power, Ethernet, Wireless, RSSI (5 LEDs)
Antennenanschluss 1 x ntype Anschluss

Ethernet

10/100BASE-TX Auto-Negotiation-Ethernet-Anschluss x 1 (RJ-45 Anschluss)
Auto MDI / MDI-X-fähigen, IEEE 802.3af Power over Ethernet kompatibel

Umwelt

Betriebstemperatur: -30 ° C ~ 80 ° C
Lagertemperatur: -30 ° C ~ 85 ° C
Luftfeuchtigkeit: 100% (nicht kondensierend)
Power Supply 802.3af PoE, 48V 0,35 A
Wasserdicht
IP67 Zertifiziert
Montage-Wandhalterung, Stativflansch, Optional Masthalter für Lichtmast
Abmessungen 259 (L) x 250 (B) x 75 (H) mm

Elektrische Spezifikationen
MODELL KC16T
Maximale Leistung 16W
Toleranz +15% / -5%
Maximale Leistung Spannung 17.4V
Strom bei Nennleistung 0.93A
Leerlaufspannung 21.7V
Kurzschluss-Strom 1,00 A
Dimension 517 x 280 x 17 mm
Masse 1,6 kg

Elektrische Spezifikationen
MODELL KC21T
Maximale Leistung 21W
Toleranz +15% / -5%
Maximale Leistung Spannung 17.4V
Strom bei Nennleistung 1.21a
Leerlaufspannung 21.7V
Short Circuit Current 1.30a
Dimension 367 x 512 x 17 mm
Masse 2,0 kg

Wirkungsgrad%: 15
Abmessungen (L x B x H) (mm): 512 X 517 X 17
Gewicht (kg): 2,8
Max. Out Leistung (Watt): 32
Max. Versorgungsspannung (VmpV): 17,4
Max. Stromleistung (Imp A): 1,84
Leerlaufspannung (Voc V): 21,7
Kurzschlussstrom (ISC A): 1,99

Wirkungsgrad%: 15
Abmessungen (L x B x H) (mm): 652 X 639 X 54
Gewicht (kg): 5,0
Max. Out Leistung (Watt): 54
Max. Versorgungsspannung (VmpV): 17,4
Max. Stromleistung (Imp A): 3,11
Leerlaufspannung (Voc V): 21,7
Kurzschlussstrom (ISC A): 3,31

ELEKTRISCHE LEISTUNG
PV-Modultyp KC65GX-2P
Bei 1000 W / m² (STC) *
Maximale Leistung [W] 65
Maximale Systemspannung [V] 750
Maximum Power Spannung [V] 17,4
Maximale Leistung Strom [A] 3,75
Leerlaufspannung (VOC) [V] 21,7
Kurzschlussstrom (ISC) [A] 3,99
ABMESSUNGEN 751 x 652 x 36mm
Gewicht 6 kg

ELEKTRISCHE LEISTUNG
PV-Module Typ KC85
Bei 1000 W / m² (STC) *
Maximale Leistung [W] 85
Maximale Systemspannung [V] 750
Maximum Power Spannung [V] 17,4
Maximale Leistung Strom [A] 5,02
Leerlaufspannung (VOC) [V] 21,7
Kurzschlussstrom (ISC) [A] 5,34
ABMESSUNGEN 1007 x 652 x 36mm
GEWICHT 8.3kg

ELEKTRISCHE LEISTUNG
PV-Modultyp KC135
Bei 1000 W / m² (STC) *
Maximale Leistung [W] 135
Maximale Systemspannung [V] 1000
Maximum Power Spannung [V] 23,6
Maximale Leistung Strom [A] 6,26
Leerlaufspannung (VOC) [V] 26,5
Kurzschlussstrom (ISC) [A] 6,98
ABMESSUNGEN 1338 x 990 x 46mm
Gewicht 16kg

ELEKTRISCHE LEISTUNG
PV-Module Typ KD210
Bei 1000 W / m² (STC) *
Maximale Leistung [W] 210
Maximale Systemspannung [V] 1000
Maximum Power Spannung [V] 26,6
Maximale Leistung Strom [A] 7,9
Leerlaufspannung (VOC) [V] 33,2
Kurzschlussstrom (ISC) [A] 8,58
ABMESSUNGEN 1500 x 990 x 46mm
Gewicht 18kg

ELEKTRISCHE LEISTUNG
PV-Module Typ KD70
Bei 1000 W / m² (STC) *
Maximale Leistung [W] 70
Maximale Systemspannung [V] 750
Maximum Power Spannung [V] 17,9
Maximale Leistung Strom [A] 3,13
Leerlaufspannung (VOC) [V] 22,1
Kurzschlussstrom (ISC) [A] 4,3
ABMESSUNGEN 778 x 660 x 44mm
Gewicht 6,5 kg

ELEKTRISCHE LEISTUNG
PV-Module Typ KD95
Bei 1000 W / m² (STC) *
Maximale Leistung [W] 95
Maximale Systemspannung [V] 750
Maximum Power Spannung [V] 17,9
Maximale Leistung Strom [A] 5,31
Leerlaufspannung (VOC) [V] 22,1
Kurzschlussstrom (ISC) [A] 5,81
ABMESSUNGEN 1043 x 660 x 44mm
Gewicht 8,5 kg

HSG1200 ist auch ideal für Gastfreundschaft Anwendung. Zum Beispiel kann ein Hotel nutzen Sie den Service-Zone-Funktion, die Privilegien der Mitarbeiter, Gäste-und VIP-Nutzung für den Zugriff auf Internet zu trennen.

Die HSG1200 den integrierten On-Demand-Konto Generation Fähigkeit ist einfach mit dem Kassierer oder Rezeptionisten zu verwenden. Jedes Gast-Account ist mit einem Preis und einer Quote Nutzung verbunden sind, entweder nach Zeit oder Volumen. Darüber hinaus arbeitet HSG1200 mit dem vorhandenen RADIUS-Server, wenn zentrale Abrechnung hatte durch den Betreiber umgesetzt worden.

Einfache Installation und Bedienung

• Unterstützt verschiedene Breitbandausbau Optionen (T1, DSL, Kabel) über statische IP, DHCP, PPPoE und PPTP
• Built-in Benutzer-Datenbank bietet ausreichend berücksichtigt Kapazität für verschiedene Einsatzszenarien
• Kompatibel mit Instant-Account Generator, um Benutzerkonten für Besucher-Basis bieten, On-Demand-Operationen
• Load Balancing und WAN-Failover steigern Bandbreitennutzung und zuverlässigere Internet-Verbindung

Integrierte Sicherheits-Features

• Standard-basierte Daten-Verschlüsselung und Benutzer-Authentifizierung: SSL, IEEE 802.1X, WPA-RADIUS
• Sichere Gast und Administrator-Zugriff über Web-basierten Login und Verwaltung über SSL
• Konfigurierbare Paketfilterung Politik bessere Sicherheit des Datenverkehrs
• Integrierter Schutz vor DoS-Schutz verhindert, dass böswillige Hacker vor dem Zusammenbruch des Netzwerks

Effektive User Management

• Komplette Authentifizierungsmechanismus Blöcke nicht authentifizierten Benutzern den Zugang zum Netz
• Rollen-und Policy-basierte Kontrolle Politikbereiche zu stärken, den Schutz vor böswilligen Benutzern
• "On-line User-Liste" überwacht in Echtzeit den Status jedes einzelnen Benutzers
• Ermöglicht Session Ablauf-Steuerung für On-Demand-Anwender von Zeit und Datenvolumen

Flexible Accounting und Billing

• Programmierbare Rechnungsprofile es den Betreibern, die Billing-Pläne für On-Demand-Benutzer anpassen
• Bandbreitenkontrolle ermöglicht es Service-Klasse für die verschiedenen Ebenen der Nutzer und die Gewinne zu maximieren
• RADIUS VSA (Vendor Specific Attributes)-Implementierung erhöht die Flexibilität für Abrechnungs-und Session-Kontrolle über RADIUS-Server
• Detaillierte pro-User-Traffic Verlaufsprotokoll für die Analyse und Protokollierung
• Billing Bericht gibt einen Überblick über alle Transaktionen für On-Demand-Anwender

Networking

• Unterstützt der Router, NAT-Modus
• Unterstützt statische IP, DHCP, PPPoE, PPTP Dial-up
• Unterstützt IP Plug and Play (PnP-IP)
• Integrierter DHCP-Server und Unterstützung für DHCP-Relay
• Unterstützt NAT:
• IP / Port-Umleitung Reiseziel
• DMZ-Server Mapping
• Virtual Server Mapping
• Konfigurierbare statische Route
• Unterstützt E-Mail-Service via E-Mail-Server bezeichnet
• Unterstützt Walled Garden
• Walled Garden Werbung Liste ermöglicht Werbung Website Links auf Login-Portalseite
• Unterstützt MAC-Adressen Pass-Through
• Unterstützt HTTP-Proxy
• Unterstützt Ethernet-Verbindung zum externen Terminal-Servern
• Unterstützung von Dual-Uplinks, Outbound-Lastausgleich und Ausfallsicherung für zuverlässigere Internet-Verbindung
• Unterstützung SIP-Pass-Through NAT

Sicherheit

• Supports security standards: SSL, IEEE 802.1X and WPA-RADIUS
• Supports VPN Pass-Through (IPSec and PPTP)
• Built-in DoS attack protection
• Supports site-to-site VPN tunnel
• Supports MAC Access Control List
• Configurable user Black List
• Allows MAC address and user identity binding for local user authentication

Service Zones

• The network is divided into maximum 9 Service Zones, each defined by a VLAN tag
• Each service zone has its own
• login portal page
• authentication options
• LAN interface IP address
• DHCP address range
• Each service zone allows access to the selected groups
• Each service zone assigns a network policy to each user group

User Management

• Supports 3,000 local accounts
• Supports 2,000 on-demand accounts
• Simultaneous support for multiple authentication methods (Local and On-demand accounts, POP3, LDAP, RADIUS, NT Domain)
• Policy-based access control (per-role assignments based on Firewall Policies, Routing, Login Schedule, Bandwidth, Quota, and Session)

1. User Session Management:
2. SSL protected login portal page
3. Supports multiple logins with one single account
4. Session idle timer
5. Session and account expiration control
6. Notification email to provide a hyperlink to login portal page
7. Supports Single Sign-On for Windows Domain
8. Login time frame control
9. Session limit

Accounting and Billing

• Provides billing plans for On-demand accounts
• Enables session expiration control for On-demand accounts by time (hour) and data volume (MB)
• Detailed per-user traffic history based on time and data volume for both local and On-demand accounts
• Traffic history report in an automatic email to administrator
• Supports RADIUS VSA (Vendor Specific Attributes) implementation for traffic accounting and session control
• Supports credit card payment via external payment gateways (Authorize.Net, PayPal, SecurePay, WorldPay)

System Administration

• Web-based management UI
• Customizable login and logout portal page
• Support for SNMP v1, v2c
• SSH remote management
• Remote firmware upgrade
• NTP time synchronization
• Menu driven console management interface
• Utilities to backup and restore the system configuration

Monitoring and Reporting

• Online status monitoring of users
• IP-based monitoring of devices
• WAN connection failure alert
• Supports external Syslog server for diagnosis and troubleshooting
• Supports user traffic history logging
• Supports user traffic session (TCP/UDP) logging
• Supports local user monthly usage report

Physical and Power

• Power Adapter: 100~240 VAC, 50/60 Hz
• Form Factor: 19” 1U Rack Mount
• Dimensions (W x D x H): 16.9″ x 6.1″ x 1.7″ (430 mm x 155 mm x 43 mm)
• Weight: 3.3 lbs (1.5 kg)

Hardware Specification

• WAN Ports: 2 x 10/100BASE-TX RJ-45
• LAN Ports: 4 x 10/100BASE-TX RJ-45
• Console Port: 1 x RS-232 DB9
• LED Indicators: 1 x Power, 1 x Status, 2 x WAN, 4 x LAN

Environment

• Operating Temperature: 0 ~ 40 °C
• Storage Temperature: -20 ~ 65 °C

Zertifizierungen

• CE, FCC
• RoHS-konform

Package Contents

• HS1200 x 1
• CD-ROM (User's Manual and QIG) x 1
• Quick Installation Guide (QIG) x 1
• Console Cable x 1
• Ethernet Cable x 1
• Straight-through Ethernet Cable x 1
• Power Adaptor (DC 12V) with Power Cord x 1
• Rack Mounting Bracket (with Screws) x 1

HSG3200 is also ideal for hospitality application. For example, a hotel can use the service zone feature to separate the privileges of staff, guest, VIP, and convention usage for accessing Internet.

The HSG3200′s built-in on-demand account generation capability is easy to use by cashiers or receptionists. Each guest account is associated to a price and a usage quota, either by time or volume. Moreover, HSG3200 works with the existing RADIUS server, if central billing had been implemented by the operator.

Leistungsmerkmale und Vorteile

Easy Installation and Operation

Supports various broadband deployment options (T1, DSL, Cable) via static IP, DHCP, PPPoE, and PPTP
Built-in user database provides sufficient account capacity for different operation scenarios
Works with instant account generator to provide user accounts for visitor-based, on-demand operations
Load balancing and WAN failover enhance bandwidth utilization and provide more reliable Internet connection
Integrated Security Features

Standards-based data encryption and user authentication: SSL, IEEE 802.1x, WPA-RADIUS
Secure guest and administrator access using web-based login and administration over SSL
Configurable packet filtering policies enhance data traffic security
Built-in DoS protection prevents malicious hackers from collapsing the network
Effective User Management

Complete authentication mechanism blocks unauthenticated users from gaining access to the network
Role-based and policy-based control policies enhances the protection against malicious users
“On-line user list” monitors real-time status of each individual user
Allows session expiration control for On-demand users by time and data volume
Flexible Accounting and Billing

Programmable billing profiles allow operators to customize the billing plans for On-demand users
Bandwidth control enables class of service for different levels of users and maximize profits
4ipnet RADIUS VSA (Vendor Specific Attributes) implementation adds flexibility for accounting and session control using RADIUS server
Detailed per-user traffic history log for analysis and record keeping
Billing report gives a summary of transaction records for On-demand users.

Call for Price Now

To open a hotspot store is at finger tips with HSG100 connecting to the Internet pipe via ADSL/ Cable/ Satellite modem. HSG100 also brings in an extra advantage – the wall-mountable, dust-proof (IP50) metal housing.

The HSG100 is the most economical yet feature-rich Wireless Hotspot Gateway, targeting mini-size stores who want to provide small, single-point wireless Internet access service. HSG100 is a perfect choice for beginners to run hotspot businesses. It does not cost a fortune to buy a pile of equipment, nor does it take the skills of an expert to glue multiple applications out of multiple freeware. For a self-proprietor who owns one or several small shops, serving wireless internet service is no magic via HSG100. Many auto-service shops and dental clinics find an HSG100 in service makes their customers' waiting time a breeze. Small coffee shops can offer time-based hotspot service by compliment coupons or paid by hours at ease. For small professional offices such as accounting or law firms who demand high-level network security, a standalone HSG100 enables the offices to provide managed Internet service to their clients or visitors in an isolated fashion, free of charge, while securely preventing unauthorized access to the intranet.

Leistungsmerkmale und Vorteile

Easy Installation and Operation

Support various broadband deployment options (T1, DSL, Cable) via static IP, DHCP and PPPoE
Integrated access point enables Wi-Fi access and eliminates the need for additional device
Built-in user database provides sufficient account capacity for different operation scenarios
Work with instant account generator to provide user accounts for visitor-based, on-demand operations
Integrated Security Features

Standards-based data encryption and user authentication: WEP, WPA, WPA2, IEEE 802.1X
Secure guest and administrator access using web-based login and administration over SSL
Configurable packet filtering policies enhance data traffic security
Built-in DoS protection prevents malicious hackers from collapsing the network
Effective User Management

Complete authentication mechanism blocks unauthenticated users from gaining access to the network
Role-based and policy-based control policies enhances the protection against malicious users
“On-line user list” monitors real-time status of each individual user
Allow session expiration control for On-demand users by time basis
Flexible Accounting and Billing

Programmable billing profiles allow operators to customize the billing plans for On-demand users
Bandwidth control enables class of service for different levels of users and maximize profits
Detailed per-user traffic history log for analysis and record keeping

Feature-packed for hotspot operation, HSG200 comes with built-in 802.11n/b/g access point, web server and web pages for clients to login, easy logo-loading for branding a hotspot store, simple user/visitor account management tool, payment plans, PayPal credit card gateway, traffic logs, IP sharing and etc. Equipped with 4ipWES (Press-n-Connect) technology, the HSG200 is able to establish an automatic WDS link with up to 2 access points at the touch of a button. Extending wireless network coverage is a breeze. To open a hotspot store is at finger tips with HSG200 connecting to the Internet pipe via ADSL/Cable/Satellite modem. HSG200 also brings in an extra advantage – the wall-mountable, dust-proof (IP50) metal housing.

For a self-proprietor who owns one or several small shops, serving wireless internet service is no magic via HSG200. Many auto-service shops and dental clinics find an HSG200 in service makes their customers' waiting time a breeze. Small coffee shops can offer time-based hotspot service by compliment coupons or paid by hours at ease. For small professional offices such as accounting or law firms who demand high-level network security, a standalone HSG200 enables the offices to provide managed Internet service to their clients or visitors in an isolated fashion, free of charge, while securely preventing unauthorized access to the intranet.

2.4GHz 2 x 2 MIMO Field Replaceable Antenna & Backward Compatible with 802.11n/b/g

* The antenna diversity design enhances the connection reliability to improve data transmission capability.
* Two detachable antennas for optimal wireless coverage and field replacement flexibility.
* Equipped with a high-speed IEEE 802.11n/b/g wireless network interface, transmission rates up to 300Mbps.

Easy Installation and Operation

* Support various broadband deployment options (T1, DSL, Cable) via static IP, DHCP and PPPoE.
* Integrated access point enables Wi-Fi access and eliminates the need for additional device.
* Built-in user database provides sufficient account capacity for different operation scenarios.
* Work on-demand account generator to provide user accounts for visitor-based, on-demand operations.

Integrated Security Features

*Standards-based data encryption and user authentication: WEP, WPA, WPA2, IEEE 802.1X.
* Secure guest and administrator access using web-based login and administration over SSL.
* Configurable packet filtering policies enhance data traffic security
4ipWES (Press-n-Connect) with push button enables quick/auto WDS link.
* Built-in DoS protection prevents malicious hackers from collapsing the network.

Effective User Management

* Complete authentication mechanism blocks unauthenticated users from gaining access to the network.
* Role-based and policy-based control policies enhances the protection against malicious users.
* “On-line user list” monitors real-time status of each individual user.
* Allow session expiration control for On-demand users by time basis.

Flexible Accounting and Billing

* Programmable billing profiles allow operators to customize the billing plans for On-demand users.
* Bandwidth control enables class of service for different levels of users and maximize profits.
* Detailed per-user traffic history log for analysis and record keeping.

Die 4ipnet HSG200-P Wi-Fi Hotspot Kit ist eine kostengünstige, aber mit vielen Funktionen All-in-One-Lösung bereit für Hotspot-Betrieb direkt aus der Box. Es ist die wirtschaftlichste Lösung für Mini-Maßstab Hotspot Geschäft. Der kompakte Wireless-Hotspot-Gateway HSG200, mit IEEE 802.11n/b/g, 2 × 2 MIMO, Power over Ethernet (PoE) und IP50 staub-Metallgehäuse, speziell richtet sich an Mini-Läden, die kleinen, ein-stellen möchten Punkt WLAN-Internetzugang Service. Mit eingebautem Benutzerdatenbank und anpassbare Billing Pläne, ermöglicht es aufgrund Generation auf Nachfrage an der Kasse. Der Netzausbau ist einfach mit dem HSG200; Hotspot-Besitzer, die Wireless-Abdeckung erweitern möchte, kann dies mit der einfachen Knopfdruck-mit proprietärer Technologie 4ipnet das, 4ipWES für WDS Easy Setup Press-n-Verbindung, die HSG200 baut automatisch eine AES-Verschlüsselung Zusammenhang mit 4ipnet Access Points, mühelos und sicher den Ausbau des Netzwerks.

Die 4ipnet NetTicketGen Hotspot-Netz Ticket, bestehend aus einer SDS100 Smart Device Server und PRT100 POS-Drucker, rationalisiert die On-Demand Erstellung von Benutzerkonten und Billing-Prozesse durch Druckknopf-Generation Rechnung und Quittung Ticket-Druck. Die SDS100 erzeugt On-Demand-Konten durch die Auslösung der Abrechnung Pläne in der HSG200 und weist den PRT100 zu entsprechenden Konto Tickets drucken. Frontline Hotspot-Betrieb wird sofort vereinfacht, Empfangsdamen und Kassierer können die Kunden den Besuch oder Gäste mit Zugang Einnahmen sorgen, indem Sie ein paar Tasten auf SDS100, unter Umgehung der manuellen Konfiguration des Gateways. Alle 4ipnet WHG / HSG-Geräte sind kompatibel und integrieren leicht mit dem NetTicketGen; Jeder WHG / HSG-Gerät kann gleichzeitig mehrere NetTicketGen Sätze über das lokale Netzwerk.

Machen ein bisschen Geld auf die Seite!

Halten Sie Ihre Kunden und Gäste glücklich, während Sie ein bisschen Geld auf die Seite, indem sie sie mit WiFi-Internetzugang. Ein WiFi-Ticketing-System kann sich um alles von der Rechnungsstellung, um die Sicherheit zu nehmen. Ist die HSG200 + SDS100 System aus wenig bekannten Firma 4ipnet gut genug für Ihr Unternehmen? Lesen Sie unseren Bericht um das herauszufinden.

4ipnet die HSG200 WLAN-Hotspot-und Ticketing-Kit ist eine wesentlich ernstere aussehende Paar dann Produkte von ZyXEL konkurrierenden Ticketing-System. Es sieht eher geschäftsmäßig mit einem dezenten schwarzen Finish. Das Kit enthält die HSG200 Router und das SDS100 Ticketing-Controller, auf die Sie mit dem Gerät ein Thermodrucker mit der mitgelieferten RS-232 Kabel. Sowohl die HSG200 und SDS100 werden robusten, mit Stahl-Fälle und Befestigungspunkte, damit sie leicht an einer Wand oder Schreibtisch befestigen. Selbst der Ticket-Drucker verfügt über eine beruhigend solide Feeling.

The main HSG200 unit is a relatively simple router with a WAN port, 2.4GHz 300Mbit/s 802.11n wireless and two 10/100Mbit/s LAN ports – one for your private network and one for your public network. More importantly, as well as simultaneous private and public networks, it has a lot of extra options that help you control the ticketing system, pricing and payment processing if you want to allow users to purchase access by debit or credit card.

The SDS100 has buttons allowing you to select from up to ten different ticket plans – the pricing and duration of each plan can be configured to suit your needs. You can connect multiple ticketing units to a single HSG200 router, allowing tickets to be sold from multiple tills or locations, but you'll need to connect them via an Ethernet switch to the single private network LAN port.

Basic setup and configuration was gratifyingly simple, although the single private LAN port makes it slightly more complicated than it has to be. If you don't have a switch, it's advisable to sort out the router's initial configuration via a LAN connection before you connect the ticketing console.

Once you've run through the router's simple web-based configuration wizard and connected the SDS100 to the private LAN port, the system is immediately functional, albeit in a basic way. Of course, further configuration is absolutely necessary, like setting up your desired security settings for both public and private wireless networks – we suggest WPA2 for the private network and open for the public one – you can carry out further configuration wirelessly with ease.

A basic firewall allows you to control traffic in and out of the public network, which is of primary importance. A routing table allows you to configure your NAT settings for more complicated routing, but we would recommend giving a guest access system of this kind its own dedicated internet connection without access to the rest of your network, rather than using the HSG200 to handle all your public and secure private routing requirements.

Alongside these features is a nicely implemented Quality of Service (QoS) system, which allows you define maximum up and downstream connection speeds for a few different kinds of traffic, such as video and voice. There's also support for various DDNS providers, although we don't recommend enabling remote access to the device unless absolutely necessary, as well as a few network inspection and status tools.

The HSG200′s most important features are handled in its Users menu, where clear sub-menus make it easy to assign different types of access ticket to each of the HSG200′s 10 options. Tickets can be defined with different durations and prices; you can also choose to have them expire at certain times and even upload a logo image to be printed on your tickets. If you set up an external payment gateway, guests can pay for access on their credit card when they log on to your network, rather than having to buy a ticket in person at the till. Payment can be processed via Authorize.Net, PayPal, SecurePay or WorldPay.

With more powerful hardware, WHG401 is capable of centrally managing 190 access points (150 x EAP700 + 40 x other 4ipnet single radio AP) to cover a wider service area in a smaller network.

Simplified Deployment and Reliable Internet Connection
Gigabit Ethernet to meet higher data rate demands of larger networks
Easy to deploy, highly scalable platform allows overlay with existing wired/wireless infrastructure without disruption
Load balancing and WAN failover enhance bandwidth utilization and provide more reliable Internet connection
Powerful Network Security Capabilities for Enterprise Applications
Standards-based data encryption: WEP, WPA, WPA2, IEEE 802.1X, and IPSec VPN
Secure guest and administrator access using web-based login and administration over SSL
Diverse user authentication methods, including built-in Local and On-demand database; supports external authentication servers including POP3, LDAP, RADIUS, Windows Domain, and SIP registrar
Built-in DoS protection keeps malicious hackers from collapsing the network
Site-to-site VPN tunnels allow branch offices to securely connect with one another and share the same account database
Comprehensive Access Control and User Management
Role-based access control and policy enforcement offer management of privileges for different user groups
On-demand account generation provides secure and managed user accounts to visitors
Service Zone function partitions a physical network into up to 9 virtual networks, each with its own definable access control and group policy profiles. Allows hotspot owners to provide various levels of customized services
Individual user bandwidth limit enables flexible traffic control for different scenarios
Centralized Access Point (AP) Management
Centralized remote control and automatic AP discovery
Management and monitoring of managed APs via web-based administration interface, including AP's system settings, online status, enabling/disabling, reset, and firmware upgrade
Periodically monitors APs and notifies the administrator of problematic APs
Flexible Accounting and Easy Billing
Configurable billing profiles allow operators to customize billing plans for on-demand users
Support online payment with credit card through Authorize.net, PayPal and SecurePay
Support for Location-Based Hotspot Services and Customizable UAM Web Pages
The logical concept of Service Zone allows the Controller to differentiate clients by locations and to provide different user experiences (such as different login pages) and network policies
When coupling with VLAN switches and DSLAM devices, the Controller can use its Port Mapping feature to tell the location of each client and therefore provide differentiated services. For example, a hotel guest would not need to type in the password again every time when accessing the Internet in room
By setting up multiple Service Zones and utilizing customized pages or external pages, a single Controller can serve multiple hotspot franchises transparently to the clients
PMS Integration for Hotel Applications
By interfacing the 3rd party middleware – NetRetriever, the controller is able to post billing information to multiple kinds of hotel PMSs, including Micros Fidelio/Opera, HiRUM, RMS, CMS Hospitality, EzyRez, RoomMaster2000, Charts and etc
A hotel guest can obtain an Internet access account at check-in counter, or sign up for the Internet access service in room anytime without the help of clerks. With PMS integration, the guest will receive a single room bill
With a single account, a guest will be able to access the Internet by wire in room or by wireless connection anywhere within the service range of APs connecting to the Controller

Call for Price Now

WHG505 is capable of centrally managing 230 access points (150 x EAP700 + 80 x other 4ipnet single radio AP) to cover a wider service area in a smaller network.

WHG505 – Secure WLAN Controller
Simplified Deployment and Reliable Internet Connection
Gigabit Ethernet to meet higher data rate demands of larger networks
Easy to deploy, highly scalable platform allows overlay with existing wired/wireless infrastructure without disruption
Load balancing and WAN failover enhance bandwidth utilization and provide more reliable Internet connection
Powerful Network Security Capabilities for Enterprise Applications
Standards-based data encryption: WEP, WPA, WPA2, IEEE 802.1X, and IPSec VPN
Secure guest and administrator access using web-based login and administration over SSL
Diverse user authentication methods, including built-in Local and On-demand database; supports external authentication servers including POP3, LDAP, RADIUS, Windows Domain, and SIP registrar
Built-in DoS protection keeps malicious hackers from collapsing the network
Site-to-site VPN tunnels allow branch offices to securely connect with one another and share the same account database
Comprehensive Access Control and User Management
Role-based access control and policy enforcement offer management of privileges for different user groups
On-demand account generation provides secure and managed user accounts to visitors
Service Zone function partitions a physical network into up to 9 virtual networks, each with its own definable access control and group policy profiles. Allows hotspot owners to provide various levels of customized services
Individual user bandwidth limit enables flexible traffic control for different scenarios
Centralized Access Point (AP) Management
Centralized remote control and automatic AP discovery
Management and monitoring of managed APs via web-based administration interface, including AP's system settings, online status, enabling/disabling, reset, and firmware upgrade
Periodically monitors APs and notifies the administrator of problematic APs
Flexible Accounting and Easy Billing
Configurable billing profiles allow operators to customize billing plans for on-demand users
Support online payment with credit card through Authorize.net, PayPal and SecurePay
Support for Location-Based Hotspot Services and Customizable UAM Web Pages
The logical concept of Service Zone allows the Controller to differentiate clients by locations and to provide different user experiences (such as different login pages) and network policies
When coupling with VLAN switches and DSLAM devices, the Controller can use its Port Mapping feature to tell the location of each client and therefore provide differentiated services. For example, a hotel guest would not need to type in the password again every time when accessing the Internet in room
By setting up multiple Service Zones and utilizing customized pages or external pages, a single Controller can serve multiple hotspot franchises transparently to the clients
PMS Integration for Hotel Applications
By interfacing the 3rd party middleware – NetRetriever, the controller is able to post billing information to multiple kinds of hotel PMSs, including Micros Fidelio/Opera, HiRUM, RMS, CMS Hospitality, EzyRez, RoomMaster2000, Charts and etc
A hotel guest can obtain an Internet access account at check-in counter, or sign up for the Internet access service in room anytime without the help of clerks. With PMS integration, the guest will receive a single room bill
With a single account, a guest will be able to access the Internet by wire in room or by wireless connection anywhere within the service range of APs connecting to the Controller

Call for Price Now

Primary Function: Waterproof IP Security Camera with WIFI and Night Vision
Day and night vision with 48 IR LED's (night visibility up to 20 meters)
Multi-level users access and management with password protection.
Allows remote viewing video and record from any internet connection.
Wi-Fi compliant with IEEE 802.11b/g on 2.4 Ghz ISM frequency band.

Connector Type: N plug to NB/H jack
Impedance: 50Ω
Frequency Range: DC ~ 6GHz
VSWR:
1.17 at 2.19GHz
1.24 at 5.61GHz
Insertion Loss: 0.62dB max
0.297dB at 2.48GHz
0.614dB at 5.89GHz
DC Breakdown Voltage: 90V ± 20%
Insulation Resistance: > 10,000MΩ
Impulse Breakdown Voltage: 10KV min (1.2/50μS waveform)
Maximum Withstand Current: 5KA min (8/20μS waveform)

• Frequency Range: 5.1Ghz – 5.9Ghz
• Antenna Gain: 8dBi
• Polarization: Vertical, Omni-Directional
• VSWR: < 1.5 : 1
• Maximum Input Power: 50 watts
• Vertical Beamwith: 17 degrees
• Horizontal Beamwidth: 360 degrees
• Impedance: 50 ohms
• Dimension: 375mm(L) x 17mm(D)
• Weight: 200g
• Connector Type: N-Type Male
• Housing Material Fiberglass
• Operating Temperature -40°C to +80°C

Features:

1. Grid Parabolic Antenna
2. Working on 5.5~5.835GHz
3. High 27dbi gain to extend coverage
4. Provide pole mounting
5. H-Plane 8.5° / E-Plane 6.6°

Technische Daten:

Frequency 5.5 ~ 5.835GHz
Type Grid
Polarization Vertical
Gain 27dBi
VSWR ≦2.0
Beam Width H-Plane 8.5° E-Plane 6.6°
Impedance 50Ω± 5Ω
Connector Type N Type (Female)

Environmental & Mechanical Characteristics

Temperature -30℃ ~ +60℃
Lightning Protection DC Ground
Radome ABS
Dimensions ∮150×600mm
Weight 2860g±50g (w/mount)

ANT-OD-242505M 2.4GHz – 2.5GHz 5dBi Mesh Omni-Directional Antenna
Frequency Range: 2.4GHz – 2.5GHz
Antenna Gain: 5dBi
Polarization: Vertical, Omni-Directional
VSWR: ≤ 1.5 : 1
Maximum Input Power: 50 watts
Vertical Beamwidth: 20 degrees
Horizontal Beamwidth: 360 degrees
Impedance: 50 ohms
Dimension: 330mm(L) x 17mm(D)
Weight: 85g
Connector Type: N-Type Male
Housing Material: Fiberglass
Operating Temperature: -40°C to +80°C

Features:

1. Grid Parabolic Antenna
2. Working on 2400MHz
3. High 24dbi gain to extend coverage.
4. Pole mounting supplied.

Spezifikation

Frequency 2400 ~ 2500MHz
Type Grid Parabolic
Polarization Linear, Horizontal / Vertical
Gain 24dBi
VSWR 2.0:1
Beam Width H-Plane 9° E-Plane 11°
Impedance 50Ω
Connector Type N-type(female)

Environmental & Mechanical Characteristics

Temperature -40 to 85℃
Lightning Protection DC Ground
Radome ABS, UV resistant
Dimensions 1000 x 600 mm
Weight 5 kg

By supporting 802.1p/802.1Q QoS and 802.11e WMM, EAP100 ensures the quality of communication for multimedia applications like voice, audio and video. The dual IEEE 802.3af PoE compliant design not only provides both data transfer and power supply through the same Ethernet cable but supports redundant connectivity with failover function.

Leistungsmerkmale und Vorteile

High Speed IEEE 802.11g and Backward Compatible with 802.11b

Equipped with a high-speed IEEE 802.11g wireless network interface based on Atheros™ chipset, transmission rates up to 54Mbps
WDS Repeater for Extending Wireless Coverage

Creates structural WDS (Bridge or Repeater) links connecting to other WDS-capable APs
Repeater links can serve as EAP100′s LAN connections to replace Ethernet ports, or simply bridge the wired side and the wireless side as a single network
Supporting QoS & 802.11e WMM

Supports IEEE 802.1p/IEEE 802.1Q Quality of Service (QoS) tagging features
Supports IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty multimedia applications like voice, audio and video
Business-class WLAN Security & Client Authentications

Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key)
Wireless LAN segmentation, Disable SSID Broadcast and the option of station-isolation
Ability to be configurable to filter out unauthorized wireless clients with build-in MAC-based access control list or via a back-end RADIUS server by sending an authentication request
Support business-class WLAN security, multiple-SSID, and VLAN tagging

Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key).
Support multiple ESSIDs and VLAN tagging.
MAC ACL list & RADIUS client support for filtering out unauthorized wireless clients.
Multiple Virtual APs & Capability of Client Isolation

One EAP100 can emulate up to 8 Virtual APs (VAP), each with its own ESSID; namely, one AP can have 8 ESSIDs
Each VAP appears to clients as an independent AP and its traffic and be associated with a VLAN ID
Supports client isolation, isolated from each other under one AP
Wall mountable Dust-proof Metal Housing

Enclosed in a metal housing, durable and non-fire hazard for the industrial environment
Dual-PoE with Link Failover

The IEEE 802.3af Power over Ethernet (PoE) compliant design eliminates the need for power sockets, allows installation of this device in areas where power outlets are not readily available to improve deployment flexibility, and provides standard based compatibility with other device
Provides dual-PoE 10/100 Fast Ethernet ports with failover function for redundant connectivity

EAP300 comes with all standards demanded by enterprise applications, including business-grade security (802.1X, WPA and WPA2), and multiple ESSIDs with VLAN tags to separate the traffics of different departments. Beyond common expectations, EAP300's real surprise is the patent-pending WES (Press-n-Connect) technology. Bridging multiple EAP300s is at the touch of a button with 4ipWES, which enables a quick and automatic WDS Easy Setup by pressing the WES button on EAP300. Extending wireless network coverage is a breeze. Supporting up to 300Mbps wireless speed with its 802.11n 3×3 MIMO solution, and a gigabit Ethernet interface, EAP300 is perfect for bandwidth-hungry applications such as video surveillance, multi-media streaming over wireless. The QoS – WMM ensures the quality of voice/video when multiple applications are transmitting media and data over the air simultaneously. EAP300′s higher throughput, security and durability make it a perfect choice of wireless connectivity for your business.

Leistungsmerkmale und Vorteile

Dual-band 3 x 3 MIMO Field Replaceable Antenna & Backward Compatible with 802.11a/b/g

The antenna diversity design enhances the connection reliability to improve data transmission capability
Three detachable high-gain antennas for optimal wireless coverage and field replaceable to meet customer demands for specific environment
Equipped with a high-speed IEEE 802.11n/a/b/g wireless network interface, transmission rates up to 300Mbps
WDS/Repeater for Extending Wireless Coverage

Creates structural WDS (Bridge or Repeater) links connecting to other WDS-capable APs
Repeater links can serve as EAP300′s LAN connections to replace Ethernet ports, or simply bridge the wired side and the wireless side as a single network
Supporting QoS & 802.11e WMM

Supports IEEE 802.1p/IEEE 802.1Q Quality of Service (QoS) tagging features
Supports IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty multimedia applications like voice, audio and video
Business-class WLAN Security & Client Authentications

Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key)
Wireless LAN segmentation, Disable SSID Broadcast and the option of station-isolation
4ipWES (Press-n-Connect) with push button enables quick/auto WDS link
Ability to be configurable to filter out unauthorized wireless clients with build-in MAC-based access control list or via a back-end RADIUS server by sending an authentication request
Multiple Virtual APs & Capability of Client Isolation

One EAP300 can emulate up to 8 Virtual APs (VAP), each with its own ESSID; namely, one AP can have 8 ESSIDs
Each VAP appears to clients as an independent AP and its traffic and be associated with a VLAN ID
Supports client isolation, isolated from each other under one AP
Wall mountable Dust-proof Metal Housing

Enclosed in a metal housing, durable and non-fire hazard for the industrial environment
Gigabit Ethernet port with PoE

The IEEE 802.3af Power over Ethernet (PoE) compliant design eliminates the need for power sockets, allows installation of this device in areas where power outlets are not readily available to improve deployment flexibility, and provides standard based compatibility with other device
Provides 10/100/1000 Gigabit Ethernet port, matching the wire and wireless throughput.

It has the interfaces to serve both wireless and wired LAN access. The simplistic yet chic design of EAP700 allows it to blend into a working or a living environment practically and elegantly. By utilizing PoE, EAP700 comes with an advantage of running fewer cables in the duct. The Power over Ethernet (PoE) LAN port on the EAP700 serves as the power feed as well as the wired network feed. Optionally, it can also be powered via an AC adapter when PoE switch is not available.

Standalone, EAP700 is an easy-to-install and cost-effective solution for most of indoor wireless deployments, including hotel rooms, apartments, offices, classrooms, libraries, private homes, public kiosks, etc. When working under one of 4ipnet Controllers, the combined network turns into an intelligent building solution, a managed internet service, or a Wi-Fi hotspot network of various scales. Multi-pack is available at lower cost to contractors/builders for larger deployments.

Leistungsmerkmale und Vorteile

Hidden in-the-wall behind faceplate, blending well into most of interior/architectural designs

Clean and stylish look. The main unit fits in a standard size outlet box, hidden behind the wall-jack faceplate.
The faceplate is a two-piece design, slide-able for adjusting the depth of the portion that goes in-the-wall, and for covering the mistakes around the cut-out hole.
Easy to install, fewer cables to run, flexible power feed options, meeting building codes

The IEEE 802.3af Power over Ethernet (PoE) eliminates the need for power sockets, allowing installation of this device in areas where power outlets are not readily available to improve deployment flexibility.
Using a single CAT5e cable feed both power and Ethernet data. Optional AC power feed is available.
High speed interface and QoS/WMM support,ideal for voice, video, and data applications

Equipped with a powerful, high-speed IEEE 802.11b/g wireless interface and hidden 2.4GHz antenna.
With the additional QoS/WMM support, EAP700 is ideal for converged voice, video, and data applications.
Connections for both wireless and wired clients

Keep the style of a simple LAN wall jack while being able to serve both LAN and WLAN devices.
Support business-class WLAN security, multiple-SSID, and VLAN tagging

Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key).
Support multiple ESSIDs and VLAN tagging.
MAC ACL list & RADIUS client support for filtering out unauthorized wireless clients.
Flexible deployment – standalone, or managed in an intelligent building solution

Stand-alone, EAP700 is a full AP (without router), normally chained from a modem router to service clients.
WDS links can be established to bridge other APs for extending WLAN coverage.
Supports client isolation, important in a hotspot or hospitality environment.
When managed under a 4ipnet Controller, such as the WHG-series, the combination has been pre-integrated to provide solutions for many applications.

EAP200 makes the wireless communication fast, secure and easy. It supports business grade security such as 802.1X, and Wi-Fi Protected Access (WPA and WPA2). By pushing a purposely built button, 4ipWES (Press-n-Connect) feature makes it easy to bridge wireless links of multiple EAP200s for forming wider wireless network coverage. EAP200 also features multiple ESSIDs with VLAN tags; one EAP200 can emulate up to eight Virtual APs, great for enterprise applications, such as separating the traffics of different departments using different ESSIDs.

Supporting up to 300Mbps wireless speed with its 802.11n 2 x 2 MIMO solutions, EAP200 is perfect for bandwidth-hungry applications such as video surveillance, multimedia streaming over the wireless links. Its QoS – WMM feature ensures the quality of voice/ video when multiple applications are transmitting media and data over the air at the same time.

EAP200's higher throughput, security and durability make it a perfect choice of wireless connectivity for your applications.

2.4GHz 2 x 2 MIMO Field Replaceable Antenna & Backward Compatible with 802.11n/b/g
The antenna diversity design enhances the connection reliability to improve data transmission capability
Two detachable antennas for optimal wireless coverage and field replacement flexibility
Equipped with a high-speed IEEE 802.11n/b/g wireless network interface, transmission rates up to 300Mbps
WDS/Repeater for Extending Wireless Coverage
4ipWES (Press-n-Connect) with push button enables quick/auto WDS link
Creates structural WDS (Bridge or Repeater) links connecting to other WDS-capable APs
WDS links can serve as EAP200′s LAN connections to replace Ethernet ports, or simply bridge the wired side and the wireless side as a single network
Supporting QoS & 802.11e WMM
Supports IEEE 802.1p/IEEE 802.1Q Quality of Service (QoS) tagging features
Supports IEEE 802.11e Wireless Multi-Media to fulfill bandwidth thirsty triple-play (voice, audio and video) applications
Business-class WLAN Security & Client Authentications
Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key)
Wireless LAN segmentation, Disable SSID Broadcast and the option of station-isolation
Configuration-capable to filter out unauthorized wireless clients with build-in MAC-based access control list or via a back-end RADIUS server by sending an authentication request
Multiple Virtual APs & Capability of Client Isolation
One EAP200 can emulate up to 8 Virtual APs (VAP), each with its own ESSID; namely, one AP can have 8 ESSIDs.
Each VAP appears to clients as an independent AP and its traffic and be associated with a VLAN ID.
Supports client isolation, isolated from each other under one AP
Wall mountable Dust-proof Metal Housing
Enclosed in a metal housing, durable and non-fire hazard for the industrial environment
Dual-PoE with Link Failover
The IEEE 802.3af Power over Ethernet (PoE) compliant design eliminates the need for power sockets, allows installation of this device in areas where power outlets are not readily available to improve deployment flexibility, and provides standard based compatibility with other device
Provides dual-PoE 10/100 Fast Ethernet ports with failover function for redundant connectivity.

Technical specifications Peripheral type Wireless router
Standards 802.11b/g/n (Draft)
Transfer rate 300 Mbps
Frequency range 5 GHz
Routing protocols TCP/IP
Safety features IP access control list
SPI firewall
Content filtering
IPS (Intrusion Prevention System)
Management features SNMP version 1, 2c
Antenna 3
Dimensions 198 x 131 x 198 mm
Weight 0.55 kg
Contents WRVS4400N router, CD-ROM with user manual and QuickVPN software, network cable, power adapter, set-up guide

Technical Specifications Norm IEEE 802.11b, IEEE 802.3af, IEEE 802.11g
Transfer Speed 108 Mbps
Encrypting WEP 64-Bit/128-Bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT
Antenna 2 detachable aerials
Ethernet Power over Ethernet
Size 170 x 205 x 195 mm
Weight 400g
Included Accessories 2 detachable aerials, CD-Rom, Ethernet cable, mains power supply, registration card.

Allgemein Gerätetyp Drahtlose Basisstation
Breite 17 cm
Tiefe 4,1 cm
Höhe 17 cm
Weight 390 g
Networking Form Factor External
Anschlusstechnik: Drahtlos
Datenübertragungsrate 300 Mbps
Leitungskodierformat OFDM
Data Link Protocol IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (Draft)
Spread-Spectrum-Methode OFDM, DSSS
Netzwerk / Transportprotokoll DHCP
Remote Management Protocol SNMP 1, SNMP 2c, HTTP, HTTPS
Frequenzband 2.4 GHz
Statusanzeiger Link Activity, Stromversorgung, Link OK
Leistungsmerkmale DHCP Support, Power over Ethernet (PoE), Lastenausgleich, VLAN-Unterstützung, Syslog-Unterstützung, E-Mail-Meldung, MAC-Adressenfilter, IPv6-Unterstützung, Firmware aktualisierbar, MIMO-Technologie, Wi-Fi Multimedia (WMM), Ereignisprotokoll, Quality of Service (QoS), RADIUS-Unterstützung, Wi-Fi Protected Setup (WPS)
Encryption Algorithm 128-Bit WEP, 64-Bit WEP, WPA, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise
Authentifizierungsmethode Radio Service Set ID (SSID), Basic Service Set Identifier (BSSID)
IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.1p, IEEE 802.11b, IEEE 802.3af, IEEE 802.11d, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11n (draft), Wi- Fi Protected Setup
Antenne Antenne Extern abnehmbar
Antennenzahl 3
Directivity Omni-directional
Gain Level 2 dBi
Expansion / Connectivity Interfaces 1 x network / power – Ethernet 10Base-T/100Base-TX/1000Base-T – RJ-45
Verschiedenes Enthaltene Kabel 1 x Netzwerkkabel
Produktzertifizierungen CE, IC, FCC
Stromversorgung Power Over Ethernet (PoE) Ja
Power Device Power adapter – external
Software / Systemanforderungen Bereitgestelltes Betriebssystem Linux
Umgebungsbedingungen Min Betriebstemperatur 0 ° C
Max. Betriebstemperatur: 40 ° C
Humidity Range Operating 10 – 85%

General Device Type Wireless router
Form Factor External
Memory RAM 64 MB
Flash Memory 32 MB
Networking Connectivity Technology Wireless, wired
Integrated Switch 4-port switch
Data Link Protocol Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Switching Protocol Ethernet
Network / Transport Protocol TCP/IP, UDP/IP, L2TP, PPPoE
Routing Protocol RIP-1, RIP-2, IGMPv2, IGMP, static IP routing, IGMPv3, GRE
Remote Management Protocol SNMP 2, HTTP, HTTPS
Capacity IPSec VPN tunnels : 5
Status Indicators Port status, power
Features NAT support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), Syslog support, traffic shaping, Stateful Packet Inspection (SPI), DoS attack prevention, VPN passthrough, URL filtering, Low-latency queuing (LLQ), Weighted Fair Queuing (WFQ), Wi-Fi Multimedia (WMM) support, Access Control List (ACL) support, Quality of Service (QoS), Wi-Fi Protected Setup (WPS), DHCP server, wireless bridge mode
Compliant Standards IEEE 802.1Q, IEEE 802.11b, IEEE 802.11g, IEEE 802.11i, Wi-Fi CERTIFIED, IEEE 802.11n
IP Telephony VoIP Functionality VoIP phone adapter
VoIP Protocols SIP v2
Voice Codecs G.711, G.723.1, G.726
Telephony Interfaces 2 phone (FXS), 1 line (FXO)
IP Telephony Features Echo cancellation, comfort noise generation (CNG), voice activity detection (VAD), Caller ID, call waiting, call hold, call transfer, silence suppression, DTMF generation/detection
Aerial Aerial External integrated
Antenna Qty 1
Gain Level 2.2 dBi
Expansion / Connectivity Interfaces 4 x network – Ethernet 10Base-T/100Base-TX – RJ-45 ¦ 1 x network – Ethernet 10Base-T/100Base-TX – RJ-45 ( WAN ) ¦ 1 x phone line – FXO – RJ-11 ¦ 2 x phone line – FXS – RJ-11 ¦ 1 x Hi-Speed USB – 4 PIN USB Type A
Miscellaneous Cables (Details) 1 x network cable ¦ 1 x phone cable
Encryption Algorithm Triple DES, 128-bit WEP, 64-bit WEP, TKIP, WPA, WPA2
Authentication Method RADIUS, Radio Service Set ID (SSID)
Compliant Standards ETSI, CISPR 24, EN 61000-3-2, ICES-003, EN 61000-3-3, EN55024, CISPR 22, EN50082-1, AS/NZS 60950-1, RSS-210, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, FCC Part 15, CS-03, EN 61000-4-5, EN 61000-6-2, EN 61000-4-11, FCC CFR47 Part 15, EN300-386, EN 61000-4-8, UL 60950-1, IEC 60950-1, EN 60950-1
Power Power Device Power adapter – external
Voltage Required AC 120/230 V
Software / System Requirements Software Included Drivers & Utilities
Umgebungsbedingungen Min Betriebstemperatur 0 ° C
Max. Betriebstemperatur: 40 ° C
Humidity Range Operating 5 – 95%

When operating in CPE (Client) mode, it functions as a Wi-Fi modem gateway to receive wireless signal over the last-mile Internet feed from WISPs. The CPE's bandwidth to the Internet can be assigned by the WISP. When in AP mode, OWL510 operates as an AP station with wall-penetrating high-power signal and long-range coverage to better serve Wi-Fi clients. In addition, it can be set up as a WDS-mesh node by establishing multiple WDS links to bridge neighbor access points together. Coming with business-class security, OWL510 in AP mode is also ideal for enterprise applications. Furthermore, one OWL510 with multiple SSIDs is capable of acting as multiple Virtual APs (VAPs). By tagging the traffic from each VAP with a unique VLAN ID, it allows for segmenting a corporate network using VLANs to protect critical resources. Being a versatile Wi-Fi device, OWL510 does not limit itself to outdoor usage only. When managed by a Controller (such as the WHG-series), it performs as a Wi-Fi base station in either a public or private wireless access deployment.

Leistungsmerkmale und Vorteile

Rugged, Compact-Sized, and Adaptive to Versatile Environments

Diversified deployments:
Municipal Wi-Fi service
Home Ower Association (HOA), RV parks, and recreation resorts
Hotels, mobile hospitals, and mobile libraries
Shopping malls, airports, harbors, roadways, warehouse, and manufacturing plants
IP68 weather- and water-proof
Housed in durable, rust-resistant metal casing
High Transmit Power and Built-in Patch Antenna

Up to 500mW output power from the board to transmit stronger signals for longer range
Built-in patch antenna for installation convenience and efficiency
LED indicators to display wireless signal strength
High-speed with QoS for Voice, Video, and Data Applications

Equipped with a high-speed IEEE 802.11g wireless network interface based on Atheros™ chipset, transmit rates up to 54Mbps
Backward compatible with 802.11b
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty triple-play (voice, video, and data) applications
Power over Ethernet (PoE) & Flexible Mounting Options

PoE feature reduces the need of additional power cable to the device; a quality Power Supply Equipment (PSE) is bundled in the package
Wall and pole mountable; mounting kit included
Multiple Operation Modes for Different Infrastructures

Two administrator accounts – one for WISP to manage wireless broadband subscribers
Multiple operation modes:
CPE Mode – wireless modem with IP sharing
AP Mode – pure AP
WDS Mode – AP with wireless bridge
Universal Repeater Mode – with MAC NAT
Business-class Security and Multiple-SSID/ VLAN tagging Support

Full range of enterprise-grade wireless security mechanisms such as WEP, WPA and WPA2 (802.11i)
Multiple-SSID capability enables one OWL510 to behave like up to 8 unique Virtual APs (VAPs), the equivalent of 8 wireless Virtual LANs (VLANs) to securely segment wireless network traffic
Support client isolation in public hotspot operation.

When operating in CPE (Client) mode, it functions as a Wi-Fi modem gateway to receive wireless signal over the last-mile Internet feed from WISPs. The CPE's bandwidth to the Internet can be assigned by the WISP. When in AP mode, OWL510 operates as an AP station with wall-penetrating high-power signal and long-range coverage to better serve Wi-Fi clients. In addition, it can be set up as a WDS-mesh node by establishing multiple WDS links to bridge neighbor access points together. Coming with business-class security, OWL510 in AP mode is also ideal for enterprise applications. Furthermore, one OWL510 with multiple SSIDs is capable of acting as multiple Virtual APs (VAPs). By tagging the traffic from each VAP with a unique VLAN ID, it allows for segmenting a corporate network using VLANs to protect critical resources. Being a versatile Wi-Fi device, OWL510 does not limit itself to outdoor usage only. When managed by a Controller (such as the WHG-series), it performs as a Wi-Fi base station in either a public or private wireless access deployment.

Leistungsmerkmale und Vorteile

Rugged, Compact-Sized, and Adaptive to Versatile Environments

Diversified deployments:
Municipal Wi-Fi service
Home Ower Association (HOA), RV parks, and recreation resorts
Hotels, mobile hospitals, and mobile libraries
Shopping malls, airports, harbors, roadways, warehouse, and manufacturing plants
IP68 weather- and water-proof
Housed in durable, rust-resistant metal casing
High Transmit Power and Built-in Patch Antenna

Up to 500mW output power from the board to transmit stronger signals for longer range
Built-in patch antenna for installation convenience and efficiency
LED indicators to display wireless signal strength
High-speed with QoS for Voice, Video, and Data Applications

Equipped with a high-speed IEEE 802.11g wireless network interface based on Atheros™ chipset, transmit rates up to 54Mbps
Backward compatible with 802.11b
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty triple-play (voice, video, and data) applications
Power over Ethernet (PoE) & Flexible Mounting Options

PoE feature reduces the need of additional power cable to the device; a quality Power Supply Equipment (PSE) is bundled in the package
Wall and pole mountable; mounting kit included
Multiple Operation Modes for Different Infrastructures

Two administrator accounts – one for WISP to manage wireless broadband subscribers
Multiple operation modes:
CPE Mode – wireless modem with IP sharing
AP Mode – pure AP
WDS Mode – AP with wireless bridge
Universal Repeater Mode – with MAC NAT
Business-class Security and Multiple-SSID/ VLAN tagging Support

Full range of enterprise-grade wireless security mechanisms such as WEP, WPA and WPA2 (802.11i)
Multiple-SSID capability enables one OWL510 to behave like up to 8 unique Virtual APs (VAPs), the equivalent of 8 wireless Virtual LANs (VLANs) to securely segment wireless network traffic
Support client isolation in public hotspot operation.

Its dual Power over Ethernet (PoE) ports provides redundant power feeds to increase power supply availability. Hardware Flexibility for Networking and Multi-Radio, External Antenna Connectors. Hardware wise, a single OWL800 is capable of hosting 2-4 multiple radio modules simultaneously. Each module can be used for serving wireless clients, building wireless bridges, or establishing wireless backhauls. For some countries that permit high-power transmission, higher power modules are optionally available. There are 4 N-type antenna connectors extended from the modules on the OWL800 board, which not only gives the flexibility in choosing antennas but greatly simplifies the antenna installation. Software Flexibility for Networking.

Multi-Mode, Multi-Link. AP, Bridge/Mesh Node, Gateway. To support diversified wireless network architectures, the OWL800 provides multiple operating modes, including Point-to-Point Bridge, Point-to-Multipoint Bridge, AP station and AP Gateway. Unlike most of common access points that rely on a single radio for different purposes at one time, the OWL800 with multiple radio modules receives and transmits over-the-air signals for each bridge link or AP station with one dedicated wireless radio to prevent degraded performance.

Leistungsmerkmale und Vorteile

Rugged for Outdoor or Harsh Environment

Weatherproof and watertight cast-metal housing with an IP68 rating
Surge immunity up to 15KV
Dual PoE for redundant power input and data link
Support multiple operation modes – Gateway mode, AP mode, and Relay mode
Multiple Radios and Antenna Connectors, Flexible for PtP, PtMP, or Mesh networks

Two built-in 802.11 a/b/g radio with two additional mini-PCI slots for expansion
High power radio modules are available options for countries where higher power transmitting is permitted
Low-loss N-type connectors allow for more flexible antenna choices for professionals
Antennas can be attached directly on the OWL800, or connected closely to OWL800, for reducing signal losses
Dual bands (2.4G and 5G) with more channels allow better channel planning to avoid interference
Each Radio module can be configured as AP or WDS independently. Up to four modules can be serving in one OWL800
Built-in AAA and User Management for Hotspot Operation

Support built-in Local accounts and On-demand accounts for user authentication
Support multiple external RADIUS servers for user authentication
Support UAM and IEEE802.1x access control functions
Built-in Hotspot access control and billing features
Robust and Reliable Wireless Link Construction

Dual PoE power input
Support 8 WDS links per 802.11a/b/g radio module
WDS discovery and link table for easy connect
Support VLAN tags over wireless inter-AP links (WDS) in addition to over the wireless links from clients to AP
Dynamic wireless link backup for network reliability
Dedicated WDS radios could form a mesh WLAN without taking away some bandwidth for serving clients
Wireless Security and QoS Support

Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or Pre-Shared Key
Support encryption, including WEP, AES, or TKIP, over wireless inter-AP links (WDS)
Wireless LAN segmentation, Disable SSID Broadcast
Support client-isolation so that clients are isolated from each other under one AP
Support QoS tags over wireless inter-AP links (WDS)
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty multimedia applications such as voice, audio and video
Excellent Solution for Community WLAN

Each AP module is capable of emulating up to 8 virtual APs (VAPs) simultaneously
With the capabilities of multiple-SSID and VLAN tag association, OWL800 allows equipment-sharing among different franchises; moreover, its QoS feature enables differentiated service operations
Multiple OWL800′s can be managed under an external WLAN controller to form a managed WLAN solution.

OWL400 supports multiple operation modes (AP/Bridge/CPE) and works well as a last-mile solution for wireless ISPs (WISPs). When in AP mode , OWL400 operates as an AP station with wall-penetrating high-power signal and long-range coverage to better serve Wi-Fi clients. In addition, it can be set up as a WDS node by establishing multiple WDS links to bridge neighbor access points together.

Coming with business-class security, OWL400 in AP mode is also ideal for enterprise applications. Furthermore, one OWL400 with multiple SSIDs is capable of acting as multiple Virtual APs (VAPs). By tagging the traffic from each VAP with a unique VLAN ID, it allows for segmenting a corporate network using VLANs to protect critical resources.

When operating in CPE (Client) mode , it functions as a Wi-Fi modem gateway to receive wireless signal over the last-mile Internet feed from WISPs. The CPE's bandwidth to the Internet can be assigned by the WISP.

Being a versatile Wi-Fi device, OWL400 does not limit itself to outdoor usage only. When managed by a Controller (such as the WHG-series), it performs as a Wi-Fi base station in either a public or private wireless access deployment.

Rugged, Compact-Sized, and Adaptive to Versatile Environments
Diversified deployments:
Municipal Wi-Fi service
Home Owner Association (HOA), RV parks, and recreation resorts
Hotels, mobile hospitals, and mobile libraries
Shopping malls, airports, harbors, roadways, warehouse, and manufacturing plants
IP68 weather- and water-proof, housed in durable, rust-resistant metal casing
High Transmit Power and N-type Connector
Up to 200mW output power from the board to transmit stronger signals for longer range
N-type connector allows for choosing suitable antenna types and gains with flexibility
High-speed with QoS for Voice, Video, and Data Applications
Equipped with a high-speed IEEE 802.11n/a chipset, supporting transmit rate up to 300Mbps
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty triple-play (voice, video, and data) applications
Power over Ethernet (PoE) & Flexible Mounting Options
PoE feature reduces the need of additional power cable to the device; a quality Power Supply Equipment (PSE) is bundled in the package
Wall and pole mountable; mounting kit included
Multiple Operation Modes for Different Infrastructures
Two administrator accounts – one for WISP to manage wireless broadband one for subscribers
Multiple operation modes:
AP Mode – pure AP
WDS Mode – AP with wireless bridge
Universal Repeater Mode – with MAC NAT
CPE Mode – wireless modem with IP sharing
Business-class Security and Multiple-SSID/ VLAN tagging Support
Full range of enterprise-grade wireless security mechanisms such as WEP, WPA and WPA2 (802.11i)
Multiple-SSID capability enables one OWL400 to behave like up to 7 unique APs, the equivalent of 7 wireless Virtual LANs (VLANs) to securely segment wireless network traffic
Support client isolation in public hotspot operation

The IP68-rated metal sealed CPE100 is compact in size and weatherproof. Coming with a mounting kit, it can be mounted on a pole or wall. It is suitable for both indoor and outdoor usage with its 200mW output power.

The CPE 100 can be deployed in various environments, for example:

• Outdoor access point for school campuses, enterprise campuses, or manufacture plants.
• Wireless CPE for MDU/ MTU, such as apartments, dormitories, and office complexes.
• Indoor access point for hotels, factories, or warehouses where metal industrial grade devices are preferred.
• Public hotspot operation for café, parks, convention centers, shopping malls, or airports.
• Wireless coverage for both indoor and outdoor ground for private resorts, acre estate/home's yards, or golf course communities.

A WISP Deployment Example

Acts as a “Wireless Modem” to bring wireless bandwidth to home and office buildings.
Wireless Bandwidth Allocation (uplink/downlink) delivered to each building depending on different subscription plans.
Full range of wireless security mechanisms such as WEP, WPA and WPA2 (802.11i) that are important for enterprise wireless deployments.
Acts as a Home Router for IP Sharing and firewall, all-in-one installation solution.
Weatherproof and watertight from its rugged aluminum housing (IP68 Approved).
Power over Ethernet (PoE) built-in for single cable installation.
On board Ethernet surge protection.
Multi-mode Support:
CPE Mode
AP Mode
WDS Mode
Universal Repeater (Bridge) Mode

The IP68-rated metal sealed CPE110 is compact in size and weatherproof. Coming with a mounting kit, it can be mounted on a pole or wall. It is suitable for both indoor and outdoor usage with its 200mW output power.

The CPE 100 can be deployed in various environments, for example:

• Outdoor access point for school campuses, enterprise campuses, or manufacture plants.
• Wireless CPE for MDU/ MTU, such as apartments, dormitories, and office complexes.
• Indoor access point for hotels, factories, or warehouses where metal industrial grade devices are preferred.
• Public hotspot operation for café, parks, convention centers, shopping malls, or airports.
• Wireless coverage for both indoor and outdoor ground for private resorts, acre estate/home's yards, or golf course communities.

A WISP Deployment Example

Acts as a “Wireless Modem” to bring wireless bandwidth to home and office buildings.
Wireless Bandwidth Allocation (uplink/downlink) delivered to each building depending on different subscription plans.
Full range of wireless security mechanisms such as WEP, WPA and WPA2 (802.11i) that are important for enterprise wireless deployments.
Acts as a Home Router for IP Sharing and firewall, all-in-one installation solution.
Weatherproof and watertight from its rugged aluminum housing (IP68 Approved).
Power over Ethernet (PoE) built-in for single cable installation.
On board Ethernet surge protection.
Multi-mode Support:
CPE Mode
AP Mode
WDS Mode
Universal Repeater (Bridge) Mode

> Free to View HD Digital TV

> 780p /1080i Resolutions

> Digital Radio and Data Channels

> Automatic Channel Search

> HDMI Output

> Single Scart Socket

> Connects to existing aerial system and TV

Description: Outdoor antenna

Frequency range: Digital terrestrial TV

Coverage: 24 dB

Größe
Height: 75 cm
Width: 54 cm
Depth: 128.2 cm

Weight With packaging: 3 kg

Content Mounting kit, connectors and coaxial cable