Características

Rango 1.Actual pruebas puede llegar hasta 50 km
2.High un rendimiento de hasta 40 Mbps
3.Support (PTP a punto o multipunto)
4.High de seguridad (AES)
5.Ease de la instalación (verdadera prueba Enlace hora de RSSI local y remota)
6.Transmit de control de potencia
7.Bandwidth de control (40/20 / 10.5 MHz)
8.Wireless TDMA (TDD Mode)
9.VLAN de paso a través del apoyo
10.IP67 caja de metal a prueba de agua nominal al aire libre con el diseño de ventilación

Especificaciones

Sin hilos
Estándares de propiedad
Banda de frecuencia 5120 ~ 6060MHz
Modulación 64QAM 3/4, 64QAM 2/3, 16QAM 3/4, 16QAM 1/2, QPSK 3/4, QPSK 1/2, BPSK 3/4, BPSK 1/2
Velocidad de datos de hasta 40Mbps dentro de 50 kilometros
Canal de ancho de banda 5/10/20 MHz
Seguridad WEP / AES
Sensibilidad -92 dBm
Potencia de salida 23dBm
Control de Transmisión de Potencia 5 niveles
Modo de funcionamiento (PTP a punto o multipunto)

Características del Software DFS

Enlace herramienta de prueba (en tiempo real local y remota RSSI)
Spanning Tree (STP)
802.1Q VLAN a través de paso
Cliente NTP

Administración

Gestión basada en web
Firmware actualizable a distancia
Compatibilidad con SNMP V2 (MIB privada, 802.11 MIB)
CLI
Backup / Restore
Sistema de Registro
Servidor de registro remoto
Hardware Watch Dog

Hardware

Procesador Intel IXP422 266MHz Atheros2414
Flash 16MB SDRAM de 32 MB
Indicación LED de encendido, Ethernet, Wireless, RSSI (5 LED)
Conector de antena: 1 x conector Ntype

Ethernet

10/100BASE-TX negociación automática del puerto Ethernet x 1 (conector RJ-45)
Auto MDI / MDI-X activado, Power over Ethernet IEEE 802.3af compatible

Medio ambiente

Temperatura de funcionamiento: -30 º C ~ 80 ° C
Temperatura de almacenamiento: -30 ° C ~ 85 ° C
Humedad: 100% (sin condensación)
Fuente de alimentación PoE 802.3af, 48V 0.35A
A prueba de agua
IP67 Certificados
De montaje en pared, montaje en poste, montaje en poste opcional para poste de luz
Dimensiones 259 (L) x 250 (W) x 75 (Al.) mm

Características

Rango 1.Actual pruebas puede llegar hasta 50 km
2.High un rendimiento de hasta 40 Mbps
3.Support (PTP a punto o multipunto)
4.High de seguridad (AES)
5.Ease de la instalación (verdadera prueba Enlace hora de RSSI local y remota)
6.Transmit de control de potencia
7.Bandwidth de control (5/10/20 MHz)
8.Wireless TDMA (TDD Mode)
9.VLAN de paso a través del apoyo
10.IP67 caja de metal a prueba de agua nominal al aire libre con el diseño de ventilación

Especificaciones

Sin hilos
Estándares de propiedad
Banda de frecuencia 2412-2472MHz
Modulación 64QAM 3/4, 64QAM 2/3, 16QAM 3/4, 16QAM 1/2, QPSK 3/4, QPSK 1/2, BPSK 3/4, BPSK 1/2
Velocidad de datos de hasta 40Mbps dentro de 50 kilometros
Canal de ancho de banda 5/10/20 MHz
Seguridad WEP / AES
Sensibilidad -92 dBm
Potencia de salida 23dBm
Control de Transmisión de Potencia 5 niveles
Modo de funcionamiento (PTP a punto o multipunto)

Características del Software DFS

Enlace herramienta de prueba (en tiempo real local y remota RSSI)
Spanning Tree (STP)
802.1Q VLAN a través de paso
Cliente NTP

Administración

Gestión basada en web
Firmware actualizable a distancia
Compatibilidad con SNMP V2 (MIB privada, 802.11 MIB)
CLI
Backup / Restore
Sistema de Registro
Servidor de registro remoto
Hardware Watch Dog

Hardware

Procesador Intel IXP422 266MHz Atheros2414
Flash 16MB SDRAM de 32 MB
Indicación LED de encendido, Ethernet, Wireless, RSSI (5 LED)
Conector de antena: 1 x conector Ntype

Ethernet

10/100BASE-TX negociación automática del puerto Ethernet x 1 (conector RJ-45)
Auto MDI / MDI-X activado, Power over Ethernet IEEE 802.3af compatible

Medio ambiente

Temperatura de funcionamiento: -30 º C ~ 80 ° C
Temperatura de almacenamiento: -30 ° C ~ 85 ° C
Humedad: 100% (sin condensación)
Fuente de alimentación PoE 802.3af, 48V 0.35A
A prueba de agua
IP67 Certificados
De montaje en pared, montaje en poste, montaje en poste opcional para poste de luz
Dimensiones 259 (L) x 250 (W) x 75 (Al.) mm

Especificaciones eléctricas
MODEL KC16T
Maximum Power 16W
Tolerance +15% / -5%
Maximum Power Voltage 17.4V
Maximum Power Current 0.93A
Open Circuit Voltage 21.7V
Short Circuit Current 1.00A
Dimension 517 X 280 X 17 mm
Mass 1.6kg

Electrical Specifications
MODEL KC21T
Maximum Power 21W
Tolerance +15% / -5%
Maximum Power Voltage 17.4V
Maximum Power Current 1.21A
Open Circuit Voltage 21.7V
Short Circuit Current 1.30A
Dimension 367 X 512 X 17 mm
Mass 2.0kg

Efficiency %: 15
Size (L x W x H) (mm): 512 X 517 X 17
Weight (kg): 2.8
Max. Out Power (Watt): 32
Max. Power Voltage (VmpV): 17,4
Max. Power Current (Imp A): 1,84
Open circuit voltage (Voc V): 21,7
Short Circuit Current (ISC A): 1,99

Efficiency%: 15
Size (L x W x H) (mm): 652 X 639 X 54
Weight (kg): 5,0
Max. Out Power (Watt): 54
Max. Power Voltage (VmpV): 17,4
Max. Power Current (Imp A): 3,11
Open circuit voltage (Voc V): 21,7
Short Circuit Current (ISC A): 3,31

ELECTRICAL PERFORMANCE
PV Module Type KC65GX-2P
At 1000 W/m² (STC)*
Maximum Power [W] 65
Maximum System Voltage [V] 750
Maximum Power Voltage [V] 17.4
Maximum Power Current [A] 3.75
Open Circuit Voltage (VOC ) [V] 21.7
Short Circuit Current (ISC) [A] 3.99
DIMENSIONS 751 x 652 x 36mm
WEIGHT 6KG

ELECTRICAL PERFORMANCE
PV Module Type KC85
At 1000 W/m² (STC)*
Maximum Power [W] 85
Maximum System Voltage [V] 750
Maximum Power Voltage [V] 17.4
Maximum Power Current [A] 5.02
Open Circuit Voltage (VOC ) [V] 21.7
Short Circuit Current (ISC) [A] 5.34
DIMENSIONS 1007 x 652 x 36mm
WEIGHT 8.3KG

ELECTRICAL PERFORMANCE
PV Module Type KC135
At 1000 W/m² (STC)*
Maximum Power [W] 135
Maximum System Voltage [V] 1000
Maximum Power Voltage [V] 23.6
Maximum Power Current [A] 6.26
Open Circuit Voltage (VOC ) [V] 26.5
Short Circuit Current (ISC) [A] 6.98
DIMENSIONS 1338 x 990 x 46mm
WEIGHT 16KG

ELECTRICAL PERFORMANCE
PV Module Type KD210
At 1000 W/m² (STC)*
Maximum Power [W] 210
Maximum System Voltage [V] 1000
Maximum Power Voltage [V] 26.6
Maximum Power Current [A] 7.9
Open Circuit Voltage (VOC ) [V] 33.2
Short Circuit Current (ISC) [A] 8.58
DIMENSIONS 1500 x 990 x 46mm
WEIGHT 18KG

ELECTRICAL PERFORMANCE
PV Module Type KD70
At 1000 W/m² (STC)*
Maximum Power [W] 70
Maximum System Voltage [V] 750
Maximum Power Voltage [V] 17.9
Maximum Power Current [A] 3.13
Open Circuit Voltage (VOC ) [V] 22.1
Short Circuit Current (ISC) [A] 4.3
DIMENSIONS 778 x 660 x 44mm
WEIGHT 6.5KG

ELECTRICAL PERFORMANCE
PV Module Type KD95
At 1000 W/m² (STC)*
Maximum Power [W] 95
Maximum System Voltage [V] 750
Maximum Power Voltage [V] 17.9
Maximum Power Current [A] 5.31
Open Circuit Voltage (VOC ) [V] 22.1
Short Circuit Current (ISC) [A] 5.81
DIMENSIONS 1043 x 660 x 44mm
WEIGHT 8.5KG

HSG1200 is also ideal for hospitality application. For example, a hotel can use the service zone feature to separate the privileges of staff, guest, and VIP usage for accessing Internet.

The HSG1200′s built-in on-demand account generation capability is easy to use by cashiers or receptionists. Each guest account is associated to a price and a usage quota, either by time or volume. Moreover, HSG1200 works with the existing RADIUS server, if central billing had been implemented by the operator.

Easy Installation and Operation

• Supports various broadband deployment options (T1, DSL, Cable) via static IP, DHCP, PPPoE, and PPTP
• Built-in user database provides sufficient account capacity for different operation scenarios
• Works with instant account generator to provide user accounts for visitor-based, on-demand operations
• El balanceo de carga y failover WAN mejorar la utilización de ancho de banda y proporcionar conexión a Internet más fiables

Características de seguridad integradas

• Basado en el estándar de cifrado de datos y autenticación de usuario: SSL, IEEE 802.1X, WPA-RADIUS
• Seguro de invitados y el acceso del administrador basada en web con nombre de usuario y la administración a través de SSL
• Las políticas de filtrado de paquetes configurables mejorar la seguridad del tráfico de datos
• Construido en la protección de denegación de servicio evita que los hackers maliciosos colapso de la red

Gestión de usuarios efectiva

• De bloques completos al mecanismo de autenticación de los usuarios no autenticados de vía de acceso a la red
• Las políticas de control basados ​​en roles y la política basada en mejorar la protección contra los usuarios malintencionados
• "On-line la lista de usuarios" monitorea en tiempo real el estado de cada usuario individual
• Permite el control de caducidad de sesión para que se puedan usuarios por volumen de datos de tiempo y

Contabilidad y facturación flexible

• Perfiles de facturación programables permiten a los operadores personalizar los planes de facturación para los usuarios on-demand
• Control de ancho de banda permite la clase de servicio para los diferentes niveles de usuarios y maximizar los beneficios
• RADIUS VSA (atributos específicos del proveedor) la aplicación le da flexibilidad para el control de la contabilidad y la sesión con un servidor RADIUS
• Detallada de cada usuario el tráfico de registro de la historia para el análisis y mantenimiento de registros
• Informe de facturación muestra un resumen de los registros de transacciones para los usuarios on-demand

Redes

• Soporta Router, el modo NAT
• Soporta IP estática, DHCP, PPPoE, PPTP Dial-up
• Soporta IP Plug and Play (IP PnP)
• Construido en el servidor DHCP y soporte para DHCP relay
• Soporta NAT:
• IP / redirección de puertos de destino
• DMZ Server Mapping
• Mapeo de servidores virtuales
• Ruta estática configurable
• Compatible con el servicio de correo electrónico a través del servidor de correo electrónico designada
• Soporta Walled Garden
• Lista de Walled Garden Publicidad permite a los enlaces de publicidad en la página web del portal de inicio de sesión
• Soporta MAC Address Pass-Through
• Soporta HTTP Proxy
• Soporta la conexión de Ethernet a los servidores de terminales externos
• Apoyo a dos enlaces ascendentes, balanceo de carga de salida y de conmutación por error de conexión a Internet más fiables
• Soporte SIP Pass-a través de NAT

Seguridad

• Compatible con los estándares de seguridad: SSL, IEEE 802.1X y WPA-RADIUS
• Soporta VPN Pass-through (IPSec y PPTP)
• Incluye protección contra ataques DoS
• Soporta de sitio a sitio de túnel VPN
• Compatible con MAC Access Control List
• Lista de usuario configurable Negro
• Permite la dirección MAC y vinculante la identidad del usuario para la autenticación de usuario local

Zonas de Servicio

• La red se divide en un máximo de 9 zonas de servicios, cada uno definido por una etiqueta de VLAN
• Cada zona de servicio tiene su propio
• el portal de acceso
• opciones de autenticación
• Interfaz LAN dirección IP
• Rango de direcciones DHCP
• Cada zona de servicio permite el acceso a los grupos seleccionados
• Cada zona de servicio asigna una directiva de red para cada grupo de usuarios

Gestión de usuarios

• Soporta 3.000 cuentas locales
• Soporta 2.000 cuentas en demandas
• El soporte simultáneo de múltiples métodos de autenticación (cuentas locales y bajo demanda, POP3, LDAP, RADIUS, NT Domain)
• Basado en políticas de control de acceso (por el papel asignaciones sobre la base de políticas de firewall, routing, Programa Acceder, ancho de banda de cuotas y sesión)

1. Gestión de usuarios de la sesión:
2. SSL de inicio de sesión protegida página del portal
3. Soporta múltiples conexiones con una sola cuenta
4. Sesión de inactividad del temporizador
5. Período de sesiones y control de caducidad de la cuenta
6. Notificación de correo electrónico para proporcionar un hipervínculo a la página de acceso del portal
7. Soporta Single Sign-On para el dominio de Windows
8. Inicio de sesión de control de marco de tiempo
9. Sesión límite

Contabilidad y facturación

• Ofrece planes de facturación para cuentas en demandas
• Permite el control de caducidad de sesión para las cuentas bajo demanda por el tiempo (horas) y el volumen de datos (MB)
• Detallada de cada usuario el historial de tráfico basado en el volumen del tiempo y de datos para las cuentas locales y bajo demanda
• Tráfico informe de la historia en un correo electrónico automático al administrador
• Compatible con RADIUS VSA (atributos específicos del proveedor) la aplicación de la contabilidad del tráfico y la sesión de control
• Admite el pago con tarjeta de crédito a través de pasarelas de pago externas (Authorize.Net, PayPal, SecurePay, WorldPay)

Sistema de Administración

• Gestión basada en web la interfaz de usuario
• De inicio de sesión y cierre de sesión personalizable página del portal
• Soporte para SNMP v1, v2c
• SSH gestión remota
• Actualización remota de firmware
• Sincronización de hora NTP
• Menú impulsada interfaz de la consola de gestión
• Utilidades de copia de seguridad y restaurar la configuración del sistema

Supervisión e informes

• La monitorización del estado de los usuarios en línea
• Basada en IP, control de dispositivos
• Conexión WAN alerta de fallo
• Soporta servidor syslog externo para el diagnóstico y solución de problemas
• Compatible con el tráfico de usuarios el registro de la historia
• Compatible con el tráfico de sesión de usuario (TCP / UDP) el registro de
• Apoya el informe mensual de uso de usuario local

Físico y la alimentación

• Adaptador de corriente: 100 ~ 240 VAC, 50/60 Hz
• Factor de forma: 19 "1U para montaje en rack
• Dimensiones (W x D x H): 16,9 "x 6,1" x 1,7 "(430 mm x 155 mm x 43 mm)
• Peso: 3,3 libras (1,5 kg)

Especificaciones de Hardware

• Puertos WAN: 2 x RJ-45 10/100BASE-TX
• Puertos LAN: 4 x RJ-45 10/100BASE-TX
• Puerto de consola: 1 x RS-232 DB9
• Indicadores LED: 1 x Alimentación, un Estado de x, 2 x WAN, 4 x LAN

Medio ambiente

• Temperatura de funcionamiento: 0 ~ 40 ° C
• Temperatura de almacenamiento: -20 ~ 65 ° C

Certificaciones

• CE, FCC
• Compatible con RoHS

Contenido del paquete

• HS1200 x 1
• CD-ROM (Manual del usuario y guía de instalación rápida) x 1
• Guía de instalación rápida (GIR) x 1
• Cable de consola x 1
• Cable Ethernet x 1
• Directo a través de Ethernet por cable x 1
• Adaptador de corriente (12V DC) con cable de alimentación x 1
• Soporte de montaje en bastidor (con tornillos) x 1

HSG3200 también es ideal para la aplicación de la hospitalidad. Por ejemplo, un hotel puede utilizar la función de zona de servicio para separar los privilegios de los funcionarios, invitados, VIP, y el uso de la convención para el acceso a Internet.

Incorporado en el HSG3200 on-demand de capacidad de generación de la cuenta es fácil de usar por los cajeros o recepcionistas. Cada cuenta de invitado se asocia a un precio y una cuota de uso, ya sea por tiempo o volumen. Por otra parte, HSG3200 trabaja con el servidor RADIUS existente, si la facturación central había llevado a cabo por el operador.

Características y Beneficios

Fácil instalación y operación

Soporta diferentes opciones de despliegue de banda ancha (T1, DSL, cable) a través de IP estática, DHCP, PPPoE, PPTP y
Base de datos de usuario proporciona la capacidad suficiente para la cuenta de los escenarios de operación diferentes
Funciona con generador de cuentas consiste en proporcionar cuentas de usuario para los visitantes basado en la demanda de las operaciones
El balanceo de carga y failover WAN mejorar la utilización de ancho de banda y proporcionar conexión a Internet más fiables
Características de seguridad integradas

Basada en los estándares de encriptación de datos y autenticación de usuario: SSL, IEEE 802.1x, WPA-RADIUS
Seguro de invitados y el acceso del administrador basada en web con nombre de usuario y la administración a través de SSL
Configurable packet filtering policies enhance data traffic security
Built-in DoS protection prevents malicious hackers from collapsing the network
Effective User Management

Complete authentication mechanism blocks unauthenticated users from gaining access to the network
Role-based and policy-based control policies enhances the protection against malicious users
“On-line user list” monitors real-time status of each individual user
Allows session expiration control for On-demand users by time and data volume
Flexible Accounting and Billing

Programmable billing profiles allow operators to customize the billing plans for On-demand users
Bandwidth control enables class of service for different levels of users and maximize profits
4ipnet RADIUS VSA (Vendor Specific Attributes) implementation adds flexibility for accounting and session control using RADIUS server
Detailed per-user traffic history log for analysis and record keeping
Billing report gives a summary of transaction records for On-demand users.

Call for Price Now

To open a hotspot store is at finger tips with HSG100 connecting to the Internet pipe via ADSL/ Cable/ Satellite modem. HSG100 also brings in an extra advantage – the wall-mountable, dust-proof (IP50) metal housing.

The HSG100 is the most economical yet feature-rich Wireless Hotspot Gateway, targeting mini-size stores who want to provide small, single-point wireless Internet access service. HSG100 is a perfect choice for beginners to run hotspot businesses. It does not cost a fortune to buy a pile of equipment, nor does it take the skills of an expert to glue multiple applications out of multiple freeware. For a self-proprietor who owns one or several small shops, serving wireless internet service is no magic via HSG100. Many auto-service shops and dental clinics find an HSG100 in service makes their customers' waiting time a breeze. Small coffee shops can offer time-based hotspot service by compliment coupons or paid by hours at ease. For small professional offices such as accounting or law firms who demand high-level network security, a standalone HSG100 enables the offices to provide managed Internet service to their clients or visitors in an isolated fashion, free of charge, while securely preventing unauthorized access to the intranet.

Características y Beneficios

Easy Installation and Operation

Support various broadband deployment options (T1, DSL, Cable) via static IP, DHCP and PPPoE
Integrated access point enables Wi-Fi access and eliminates the need for additional device
Built-in user database provides sufficient account capacity for different operation scenarios
Work with instant account generator to provide user accounts for visitor-based, on-demand operations
Integrated Security Features

Standards-based data encryption and user authentication: WEP, WPA, WPA2, IEEE 802.1X
Secure guest and administrator access using web-based login and administration over SSL
Configurable packet filtering policies enhance data traffic security
Built-in DoS protection prevents malicious hackers from collapsing the network
Effective User Management

Complete authentication mechanism blocks unauthenticated users from gaining access to the network
Role-based and policy-based control policies enhances the protection against malicious users
“On-line user list” monitors real-time status of each individual user
Allow session expiration control for On-demand users by time basis
Flexible Accounting and Billing

Programmable billing profiles allow operators to customize the billing plans for On-demand users
Bandwidth control enables class of service for different levels of users and maximize profits
Detailed per-user traffic history log for analysis and record keeping

Repleto de características para la operación de punto de acceso, HSG200 viene con una función de 802.11n/b/g punto de acceso, servidor web y páginas web para los clientes para acceder y fácil el logotipo de carga para la marca de una tienda de punto de acceso, simple usuario / visitante herramienta de gestión de cuentas, planes de pago, de puerta de enlace de PayPal con tarjeta de crédito, los registros de tráfico, el intercambio de IP y etc Equipado con 4ipWES (Press-n-Connect) la tecnología, la HSG200 es capaz de establecer un enlace WDS automática con un máximo de 2 puntos de acceso con el toque de un botón . Extensión de la cobertura de red inalámbrica es muy sencillo. Para abrir una tienda de punto de acceso es en la punta de los dedos con HSG200 la conexión a la tubería de Internet por módem ADSL / Cable / Satélite. HSG200 también trae una ventaja adicional - el montaje en la pared, a prueba de polvo (IP50) caja de metal.

Para el auto-propietario que posee tiendas pequeñas de uno o varios, sirviendo servicio de Internet inalámbrico a través de la magia no es HSG200. Muchos servicios de auto-tiendas y clínicas dentales encontrar una HSG200 en servicio hace que el tiempo de sus clientes en espera de una brisa. Las pequeñas tiendas de café puede ofrecer en función del tiempo de servicio hotspot por cupones complementar o pagados por horas a la facilidad. Para las pequeñas oficinas de profesionales, tales como firmas de contabilidad o de derecho que demandan alto nivel de seguridad de red, un HSG200 independiente permite a las oficinas para ofrecer servicios gestionados a Internet a sus clientes o visitantes de una manera aislada, de forma gratuita, mientras que de forma segura para evitar el acceso no autorizado a la intranet.

2,4 GHz 2 x 2 Antena MIMO campo reemplazable y compatible con versiones anteriores con 802.11n/b/g

* El diseño de la diversidad de la antena mejora la confiabilidad de la conexión para mejorar la capacidad de transmisión de datos.
* Dos antenas desmontables para una cobertura inalámbrica óptima y flexibilidad reemplazo en el campo.
* Equipado con una interfaz de alta velocidad de red IEEE 802.11n/b/g inalámbrico, las tasas de transmisión de hasta 300Mbps.

Fácil instalación y operación

* Soporta varias opciones de despliegue de banda ancha (T1, DSL, cable) a través de IP estática, DHCP y PPPoE.
Punto de acceso integrado * permite acceso Wi-Fi y elimina la necesidad de dispositivos adicionales.
* Base de datos de usuario proporciona la capacidad suficiente para la cuenta de los escenarios de operación diferentes.
* Trabajar bajo demanda generador de cuentas para proporcionar cuentas de usuario de base de los visitantes, en demanda de operaciones.

Características de seguridad integradas

* Basado en estándares de cifrado de datos y autenticación de usuario: WEP, WPA, WPA2, 802.1X.
* Seguro de invitados y el acceso del administrador basada en web con nombre de usuario y la administración a través de SSL.
* Las políticas de filtrado de paquetes configurables mejorar la seguridad del tráfico de datos
4ipWES (Press-n-Connect) con pulsador permite una rápida / auto enlace WDS.
* Construida en la protección de denegación de servicio evita que los hackers maliciosos colapso de la red.

Gestión de usuarios efectiva

* Los bloques completos al mecanismo de autenticación de los usuarios no autenticados para acceder a la red.
* Las políticas de control basados ​​en roles basada en políticas y refuerza la protección contra los usuarios malintencionados.
* "On-line la lista de usuarios" monitorea en tiempo real el estado de cada usuario individual.
* Permitir el control de caducidad de sesión para los usuarios bajo demanda por base de tiempo.

Contabilidad y facturación flexible

* Los perfiles de facturación programables permiten a los operadores personalizar los planes de facturación para los usuarios bajo demanda.
* El control de ancho de banda permite a la clase de servicio para los diferentes niveles de usuarios y maximizar los beneficios.
* Información detallada de cada usuario el tráfico de registro de la historia para el análisis y mantenimiento de registros.

El 4ipnet HSG200 P-Wi-Fi Hotspot Kit es una solución rentable pero con multitud de funciones, todo-en-una solución lista para funcionar punto de acceso a la derecha de la caja. Es la solución más económica para las empresas punto caliente mini escala. El compacto HSG200 Hotspot Gateway Inalámbrico, con IEEE 802.11n/b/g, 2 × 2 MIMO, Power over Ethernet (PoE), y IP50 a prueba de polvo carcasa de metal, especialmente dirigido a las tiendas de tamaño mini, que quieren ofrecer a las pequeñas, de un solo Punto de Internet inalámbrico de acceso al servicio. Con la base de datos de usuario integrada y los planes personalizados de facturación, que permite la generación de la cuenta de la demanda en el mostrador del cajero. Expansión de la red es sencillo con la HSG200, los propietarios de hotspots que deseen ampliar la cobertura inalámbrica puede hacerlo con el simple toque de un botón con la tecnología patentada de 4ipnet, 4ipWES Press-n-Connect para el programa de instalación de WDS Fácil, el HSG200 establece automáticamente un cifrado AES relación con los puntos de acceso 4ipnet, sin esfuerzo y con seguridad la expansión de la red.

El hotspot 4ipnet NetTicketGen Generador de entradas de red, que consiste en SDS100 servidor de dispositivos inteligentes e impresoras POS PRT100, agiliza la carta de creación de cuenta y los procesos de facturación a través de generación de cuentas de botón y la impresión de boletos recibo. El SDS100 genera bajo demanda mediante la activación de las cuentas de los planes de facturación en el HSG200 e instruye al PRT100 para imprimir los boletos correspondientes de la cuenta. Primera línea de operación de punto de acceso es inmediatamente simplificado; recepcionistas y cajeros pueden ofrecer a los clientes y gente que viaja con los recibos de acceso pulsando algunos botones en SDS100, sin pasar por la configuración manual de la puerta de enlace. Todos 4ipnet WHG / dispositivos HSG son compatibles y se integran fácilmente con la NetTicketGen; Cada WHG / HSG dispositivo puede soportar simultáneamente varios conjuntos NetTicketGen a través de la red local.

Haciendo un poco de dinero en el lado!

Mantenga a sus clientes e invitados felices, mientras que hace un poco de dinero en el lateral, poniendo a su disposición conexión inalámbrica a Internet. Un sistema Wi-Fi venta de entradas puede hacerse cargo de todo, desde la facturación a la seguridad. Es el HSG200 + SDS100 sistema de 4ipnet empresa poco conocida, lo suficientemente bueno para su negocio? Lea nuestra revisión de averiguarlo.

HSG200 4ipnet punto de acceso inalámbrico y emisión de billetes kit es un par mucho más grave de aspecto de los productos de la competencia luego de ZyXEL sistema de tickets. Se ve más profesional con un acabado sobrio negro. El kit incluye el router HSG200 y el controlador SDS100 venta de entradas, al que se conecta la impresora térmica de boletos de uso de los incluidos cable RS-232. Tanto el HSG200 y SDS100 se robustos, con cajas de acero y los puntos de montaje para que sean fáciles de conseguir en una pared o escritorio. Incluso la impresora de tickets tiene una sensación tranquilizadora sólida a la misma.

The main HSG200 unit is a relatively simple router with a WAN port, 2.4GHz 300Mbit/s 802.11n wireless and two 10/100Mbit/s LAN ports – one for your private network and one for your public network. More importantly, as well as simultaneous private and public networks, it has a lot of extra options that help you control the ticketing system, pricing and payment processing if you want to allow users to purchase access by debit or credit card.

The SDS100 has buttons allowing you to select from up to ten different ticket plans – the pricing and duration of each plan can be configured to suit your needs. You can connect multiple ticketing units to a single HSG200 router, allowing tickets to be sold from multiple tills or locations, but you'll need to connect them via an Ethernet switch to the single private network LAN port.

Basic setup and configuration was gratifyingly simple, although the single private LAN port makes it slightly more complicated than it has to be. If you don't have a switch, it's advisable to sort out the router's initial configuration via a LAN connection before you connect the ticketing console.

Once you've run through the router's simple web-based configuration wizard and connected the SDS100 to the private LAN port, the system is immediately functional, albeit in a basic way. Of course, further configuration is absolutely necessary, like setting up your desired security settings for both public and private wireless networks – we suggest WPA2 for the private network and open for the public one – you can carry out further configuration wirelessly with ease.

A basic firewall allows you to control traffic in and out of the public network, which is of primary importance. A routing table allows you to configure your NAT settings for more complicated routing, but we would recommend giving a guest access system of this kind its own dedicated internet connection without access to the rest of your network, rather than using the HSG200 to handle all your public and secure private routing requirements.

Alongside these features is a nicely implemented Quality of Service (QoS) system, which allows you define maximum up and downstream connection speeds for a few different kinds of traffic, such as video and voice. There's also support for various DDNS providers, although we don't recommend enabling remote access to the device unless absolutely necessary, as well as a few network inspection and status tools.

The HSG200′s most important features are handled in its Users menu, where clear sub-menus make it easy to assign different types of access ticket to each of the HSG200′s 10 options. Tickets can be defined with different durations and prices; you can also choose to have them expire at certain times and even upload a logo image to be printed on your tickets. If you set up an external payment gateway, guests can pay for access on their credit card when they log on to your network, rather than having to buy a ticket in person at the till. Payment can be processed via Authorize.Net, PayPal, SecurePay or WorldPay.

With more powerful hardware, WHG401 is capable of centrally managing 190 access points (150 x EAP700 + 40 x other 4ipnet single radio AP) to cover a wider service area in a smaller network.

Simplified Deployment and Reliable Internet Connection
Gigabit Ethernet to meet higher data rate demands of larger networks
Easy to deploy, highly scalable platform allows overlay with existing wired/wireless infrastructure without disruption
Load balancing and WAN failover enhance bandwidth utilization and provide more reliable Internet connection
Powerful Network Security Capabilities for Enterprise Applications
Standards-based data encryption: WEP, WPA, WPA2, IEEE 802.1X, and IPSec VPN
Secure guest and administrator access using web-based login and administration over SSL
Diverse user authentication methods, including built-in Local and On-demand database; supports external authentication servers including POP3, LDAP, RADIUS, Windows Domain, and SIP registrar
Built-in DoS protection keeps malicious hackers from collapsing the network
Site-to-site VPN tunnels allow branch offices to securely connect with one another and share the same account database
Comprehensive Access Control and User Management
Role-based access control and policy enforcement offer management of privileges for different user groups
On-demand account generation provides secure and managed user accounts to visitors
Service Zone function partitions a physical network into up to 9 virtual networks, each with its own definable access control and group policy profiles. Allows hotspot owners to provide various levels of customized services
Individual user bandwidth limit enables flexible traffic control for different scenarios
Centralized Access Point (AP) Management
Centralized remote control and automatic AP discovery
Management and monitoring of managed APs via web-based administration interface, including AP's system settings, online status, enabling/disabling, reset, and firmware upgrade
Periodically monitors APs and notifies the administrator of problematic APs
Flexible Accounting and Easy Billing
Configurable billing profiles allow operators to customize billing plans for on-demand users
Support online payment with credit card through Authorize.net, PayPal and SecurePay
Support for Location-Based Hotspot Services and Customizable UAM Web Pages
The logical concept of Service Zone allows the Controller to differentiate clients by locations and to provide different user experiences (such as different login pages) and network policies
When coupling with VLAN switches and DSLAM devices, the Controller can use its Port Mapping feature to tell the location of each client and therefore provide differentiated services. For example, a hotel guest would not need to type in the password again every time when accessing the Internet in room
By setting up multiple Service Zones and utilizing customized pages or external pages, a single Controller can serve multiple hotspot franchises transparently to the clients
PMS Integration for Hotel Applications
By interfacing the 3rd party middleware – NetRetriever, the controller is able to post billing information to multiple kinds of hotel PMSs, including Micros Fidelio/Opera, HiRUM, RMS, CMS Hospitality, EzyRez, RoomMaster2000, Charts and etc
A hotel guest can obtain an Internet access account at check-in counter, or sign up for the Internet access service in room anytime without the help of clerks. With PMS integration, the guest will receive a single room bill
With a single account, a guest will be able to access the Internet by wire in room or by wireless connection anywhere within the service range of APs connecting to the Controller

Call for Price Now

WHG505 is capable of centrally managing 230 access points (150 x EAP700 + 80 x other 4ipnet single radio AP) to cover a wider service area in a smaller network.

WHG505 – Secure WLAN Controller
Simplified Deployment and Reliable Internet Connection
Gigabit Ethernet to meet higher data rate demands of larger networks
Easy to deploy, highly scalable platform allows overlay with existing wired/wireless infrastructure without disruption
Load balancing and WAN failover enhance bandwidth utilization and provide more reliable Internet connection
Powerful Network Security Capabilities for Enterprise Applications
Standards-based data encryption: WEP, WPA, WPA2, IEEE 802.1X, and IPSec VPN
Secure guest and administrator access using web-based login and administration over SSL
Diverse user authentication methods, including built-in Local and On-demand database; supports external authentication servers including POP3, LDAP, RADIUS, Windows Domain, and SIP registrar
Built-in DoS protection keeps malicious hackers from collapsing the network
Site-to-site VPN tunnels allow branch offices to securely connect with one another and share the same account database
Comprehensive Access Control and User Management
Role-based access control and policy enforcement offer management of privileges for different user groups
On-demand account generation provides secure and managed user accounts to visitors
Service Zone function partitions a physical network into up to 9 virtual networks, each with its own definable access control and group policy profiles. Allows hotspot owners to provide various levels of customized services
Individual user bandwidth limit enables flexible traffic control for different scenarios
Centralized Access Point (AP) Management
Centralized remote control and automatic AP discovery
Management and monitoring of managed APs via web-based administration interface, including AP's system settings, online status, enabling/disabling, reset, and firmware upgrade
Periodically monitors APs and notifies the administrator of problematic APs
Flexible Accounting and Easy Billing
Configurable billing profiles allow operators to customize billing plans for on-demand users
Support online payment with credit card through Authorize.net, PayPal and SecurePay
Support for Location-Based Hotspot Services and Customizable UAM Web Pages
The logical concept of Service Zone allows the Controller to differentiate clients by locations and to provide different user experiences (such as different login pages) and network policies
When coupling with VLAN switches and DSLAM devices, the Controller can use its Port Mapping feature to tell the location of each client and therefore provide differentiated services. For example, a hotel guest would not need to type in the password again every time when accessing the Internet in room
By setting up multiple Service Zones and utilizing customized pages or external pages, a single Controller can serve multiple hotspot franchises transparently to the clients
PMS Integration for Hotel Applications
By interfacing the 3rd party middleware – NetRetriever, the controller is able to post billing information to multiple kinds of hotel PMSs, including Micros Fidelio/Opera, HiRUM, RMS, CMS Hospitality, EzyRez, RoomMaster2000, Charts and etc
A hotel guest can obtain an Internet access account at check-in counter, or sign up for the Internet access service in room anytime without the help of clerks. With PMS integration, the guest will receive a single room bill
With a single account, a guest will be able to access the Internet by wire in room or by wireless connection anywhere within the service range of APs connecting to the Controller

Call for Price Now

Primary Function: Waterproof IP Security Camera with WIFI and Night Vision
Day and night vision with 48 IR LED's (night visibility up to 20 meters)
Multi-level users access and management with password protection.
Allows remote viewing video and record from any internet connection.
Wi-Fi compliant with IEEE 802.11b/g on 2.4 Ghz ISM frequency band.

Connector Type: N plug to NB/H jack
Impedance: 50Ω
Frequency Range: DC ~ 6GHz
VSWR:
1.17 at 2.19GHz
1.24 at 5.61GHz
Insertion Loss: 0.62dB max
0.297dB at 2.48GHz
0.614dB at 5.89GHz
DC Breakdown Voltage: 90V ± 20%
Insulation Resistance: > 10,000MΩ
Impulse Breakdown Voltage: 10KV min (1.2/50μS waveform)
Maximum Withstand Current: 5KA min (8/20μS waveform)

• Frequency Range: 5.1Ghz – 5.9Ghz
• Antenna Gain: 8dBi
• Polarization: Vertical, Omni-Directional
• VSWR: < 1.5 : 1
• Maximum Input Power: 50 watts
• Vertical Beamwith: 17 degrees
• Horizontal Beamwidth: 360 degrees
• Impedance: 50 ohms
• Dimension: 375mm(L) x 17mm(D)
• Weight: 200g
• Connector Type: N-Type Male
• Housing Material Fiberglass
• Operating Temperature -40°C to +80°C

Características:

1. Grid Parabolic Antenna
2. Working on 5.5~5.835GHz
3. High 27dbi gain to extend coverage
4. Provide pole mounting
5. H-Plane 8.5° / E-Plane 6.6°

Especificaciones:

Frequency 5.5 ~ 5.835GHz
Type Grid
Polarization Vertical
Gain 27dBi
VSWR ≦2.0
Beam Width H-Plane 8.5° E-Plane 6.6°
Impedance 50Ω± 5Ω
Connector Type N Type (Female)

Environmental & Mechanical Characteristics

Temperature -30℃ ~ +60℃
Lightning Protection DC Ground
Radome ABS
Dimensions ∮150×600mm
Weight 2860g±50g (w/mount)

ANT-OD-242505M 2.4GHz – 2.5GHz 5dBi Mesh Omni-Directional Antenna
Frequency Range: 2.4GHz – 2.5GHz
Antenna Gain: 5dBi
Polarization: Vertical, Omni-Directional
VSWR: ≤ 1.5 : 1
Maximum Input Power: 50 watts
Vertical Beamwidth: 20 degrees
Horizontal Beamwidth: 360 degrees
Impedance: 50 ohms
Dimension: 330mm(L) x 17mm(D)
Weight: 85g
Connector Type: N-Type Male
Housing Material: Fiberglass
Operating Temperature: -40°C to +80°C

Características:

1. Grid Parabolic Antenna
2. Working on 2400MHz
3. High 24dbi gain to extend coverage.
4. Pole mounting supplied.

Especificación

Frequency 2400 ~ 2500MHz
Type Grid Parabolic
Polarization Linear, Horizontal / Vertical
Gain 24dBi
VSWR 2.0:1
Beam Width H-Plane 9° E-Plane 11°
Impedance 50Ω
Connector Type N-type(female)

Environmental & Mechanical Characteristics

Temperature -40 to 85℃
Lightning Protection DC Ground
Radome ABS, UV resistant
Dimensions 1000 x 600 mm
Weight 5 kg

By supporting 802.1p/802.1Q QoS and 802.11e WMM, EAP100 ensures the quality of communication for multimedia applications like voice, audio and video. The dual IEEE 802.3af PoE compliant design not only provides both data transfer and power supply through the same Ethernet cable but supports redundant connectivity with failover function.

Características y Beneficios

High Speed IEEE 802.11g and Backward Compatible with 802.11b

Equipped with a high-speed IEEE 802.11g wireless network interface based on Atheros™ chipset, transmission rates up to 54Mbps
WDS Repeater for Extending Wireless Coverage

Creates structural WDS (Bridge or Repeater) links connecting to other WDS-capable APs
Repeater links can serve as EAP100′s LAN connections to replace Ethernet ports, or simply bridge the wired side and the wireless side as a single network
Supporting QoS & 802.11e WMM

Supports IEEE 802.1p/IEEE 802.1Q Quality of Service (QoS) tagging features
Supports IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty multimedia applications like voice, audio and video
Business-class WLAN Security & Client Authentications

Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key)
Wireless LAN segmentation, Disable SSID Broadcast and the option of station-isolation
Ability to be configurable to filter out unauthorized wireless clients with build-in MAC-based access control list or via a back-end RADIUS server by sending an authentication request
Support business-class WLAN security, multiple-SSID, and VLAN tagging

Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key).
Support multiple ESSIDs and VLAN tagging.
MAC ACL list & RADIUS client support for filtering out unauthorized wireless clients.
Multiple Virtual APs & Capability of Client Isolation

One EAP100 can emulate up to 8 Virtual APs (VAP), each with its own ESSID; namely, one AP can have 8 ESSIDs
Each VAP appears to clients as an independent AP and its traffic and be associated with a VLAN ID
Supports client isolation, isolated from each other under one AP
Wall mountable Dust-proof Metal Housing

Enclosed in a metal housing, durable and non-fire hazard for the industrial environment
Dual-PoE with Link Failover

The IEEE 802.3af Power over Ethernet (PoE) compliant design eliminates the need for power sockets, allows installation of this device in areas where power outlets are not readily available to improve deployment flexibility, and provides standard based compatibility with other device
Provides dual-PoE 10/100 Fast Ethernet ports with failover function for redundant connectivity

EAP300 comes with all standards demanded by enterprise applications, including business-grade security (802.1X, WPA and WPA2), and multiple ESSIDs with VLAN tags to separate the traffics of different departments. Beyond common expectations, EAP300's real surprise is the patent-pending WES (Press-n-Connect) technology. Bridging multiple EAP300s is at the touch of a button with 4ipWES, which enables a quick and automatic WDS Easy Setup by pressing the WES button on EAP300. Extending wireless network coverage is a breeze. Supporting up to 300Mbps wireless speed with its 802.11n 3×3 MIMO solution, and a gigabit Ethernet interface, EAP300 is perfect for bandwidth-hungry applications such as video surveillance, multi-media streaming over wireless. The QoS – WMM ensures the quality of voice/video when multiple applications are transmitting media and data over the air simultaneously. EAP300′s higher throughput, security and durability make it a perfect choice of wireless connectivity for your business.

Características y Beneficios

Dual-band 3 x 3 MIMO Field Replaceable Antenna & Backward Compatible with 802.11a/b/g

The antenna diversity design enhances the connection reliability to improve data transmission capability
Three detachable high-gain antennas for optimal wireless coverage and field replaceable to meet customer demands for specific environment
Equipped with a high-speed IEEE 802.11n/a/b/g wireless network interface, transmission rates up to 300Mbps
WDS/Repeater for Extending Wireless Coverage

Creates structural WDS (Bridge or Repeater) links connecting to other WDS-capable APs
Repeater links can serve as EAP300′s LAN connections to replace Ethernet ports, or simply bridge the wired side and the wireless side as a single network
Supporting QoS & 802.11e WMM

Supports IEEE 802.1p/IEEE 802.1Q Quality of Service (QoS) tagging features
Supports IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty multimedia applications like voice, audio and video
Business-class WLAN Security & Client Authentications

Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key)
Wireless LAN segmentation, Disable SSID Broadcast and the option of station-isolation
4ipWES (Press-n-Connect) with push button enables quick/auto WDS link
Ability to be configurable to filter out unauthorized wireless clients with build-in MAC-based access control list or via a back-end RADIUS server by sending an authentication request
Multiple Virtual APs & Capability of Client Isolation

One EAP300 can emulate up to 8 Virtual APs (VAP), each with its own ESSID; namely, one AP can have 8 ESSIDs
Each VAP appears to clients as an independent AP and its traffic and be associated with a VLAN ID
Supports client isolation, isolated from each other under one AP
Wall mountable Dust-proof Metal Housing

Enclosed in a metal housing, durable and non-fire hazard for the industrial environment
Gigabit Ethernet port with PoE

The IEEE 802.3af Power over Ethernet (PoE) compliant design eliminates the need for power sockets, allows installation of this device in areas where power outlets are not readily available to improve deployment flexibility, and provides standard based compatibility with other device
Provides 10/100/1000 Gigabit Ethernet port, matching the wire and wireless throughput.

It has the interfaces to serve both wireless and wired LAN access. The simplistic yet chic design of EAP700 allows it to blend into a working or a living environment practically and elegantly. By utilizing PoE, EAP700 comes with an advantage of running fewer cables in the duct. The Power over Ethernet (PoE) LAN port on the EAP700 serves as the power feed as well as the wired network feed. Optionally, it can also be powered via an AC adapter when PoE switch is not available.

Standalone, EAP700 is an easy-to-install and cost-effective solution for most of indoor wireless deployments, including hotel rooms, apartments, offices, classrooms, libraries, private homes, public kiosks, etc. When working under one of 4ipnet Controllers, the combined network turns into an intelligent building solution, a managed internet service, or a Wi-Fi hotspot network of various scales. Multi-pack is available at lower cost to contractors/builders for larger deployments.

Características y Beneficios

Hidden in-the-wall behind faceplate, blending well into most of interior/architectural designs

Clean and stylish look. The main unit fits in a standard size outlet box, hidden behind the wall-jack faceplate.
The faceplate is a two-piece design, slide-able for adjusting the depth of the portion that goes in-the-wall, and for covering the mistakes around the cut-out hole.
Easy to install, fewer cables to run, flexible power feed options, meeting building codes

The IEEE 802.3af Power over Ethernet (PoE) eliminates the need for power sockets, allowing installation of this device in areas where power outlets are not readily available to improve deployment flexibility.
Using a single CAT5e cable feed both power and Ethernet data. Optional AC power feed is available.
High speed interface and QoS/WMM support,ideal for voice, video, and data applications

Equipped with a powerful, high-speed IEEE 802.11b/g wireless interface and hidden 2.4GHz antenna.
With the additional QoS/WMM support, EAP700 is ideal for converged voice, video, and data applications.
Connections for both wireless and wired clients

Keep the style of a simple LAN wall jack while being able to serve both LAN and WLAN devices.
Support business-class WLAN security, multiple-SSID, and VLAN tagging

Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key).
Support multiple ESSIDs and VLAN tagging.
MAC ACL list & RADIUS client support for filtering out unauthorized wireless clients.
Flexible deployment – standalone, or managed in an intelligent building solution

Stand-alone, EAP700 is a full AP (without router), normally chained from a modem router to service clients.
WDS links can be established to bridge other APs for extending WLAN coverage.
Supports client isolation, important in a hotspot or hospitality environment.
When managed under a 4ipnet Controller, such as the WHG-series, the combination has been pre-integrated to provide solutions for many applications.

EAP200 makes the wireless communication fast, secure and easy. It supports business grade security such as 802.1X, and Wi-Fi Protected Access (WPA and WPA2). By pushing a purposely built button, 4ipWES (Press-n-Connect) feature makes it easy to bridge wireless links of multiple EAP200s for forming wider wireless network coverage. EAP200 also features multiple ESSIDs with VLAN tags; one EAP200 can emulate up to eight Virtual APs, great for enterprise applications, such as separating the traffics of different departments using different ESSIDs.

Supporting up to 300Mbps wireless speed with its 802.11n 2 x 2 MIMO solutions, EAP200 is perfect for bandwidth-hungry applications such as video surveillance, multimedia streaming over the wireless links. Its QoS – WMM feature ensures the quality of voice/ video when multiple applications are transmitting media and data over the air at the same time.

EAP200's higher throughput, security and durability make it a perfect choice of wireless connectivity for your applications.

2.4GHz 2 x 2 MIMO Field Replaceable Antenna & Backward Compatible with 802.11n/b/g
The antenna diversity design enhances the connection reliability to improve data transmission capability
Two detachable antennas for optimal wireless coverage and field replacement flexibility
Equipped with a high-speed IEEE 802.11n/b/g wireless network interface, transmission rates up to 300Mbps
WDS/Repeater for Extending Wireless Coverage
4ipWES (Press-n-Connect) with push button enables quick/auto WDS link
Creates structural WDS (Bridge or Repeater) links connecting to other WDS-capable APs
WDS links can serve as EAP200′s LAN connections to replace Ethernet ports, or simply bridge the wired side and the wireless side as a single network
Supporting QoS & 802.11e WMM
Supports IEEE 802.1p/IEEE 802.1Q Quality of Service (QoS) tagging features
Supports IEEE 802.11e Wireless Multi-Media to fulfill bandwidth thirsty triple-play (voice, audio and video) applications
Business-class WLAN Security & Client Authentications
Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key)
Wireless LAN segmentation, Disable SSID Broadcast and the option of station-isolation
Configuration-capable to filter out unauthorized wireless clients with build-in MAC-based access control list or via a back-end RADIUS server by sending an authentication request
Multiple Virtual APs & Capability of Client Isolation
One EAP200 can emulate up to 8 Virtual APs (VAP), each with its own ESSID; namely, one AP can have 8 ESSIDs.
Each VAP appears to clients as an independent AP and its traffic and be associated with a VLAN ID.
Supports client isolation, isolated from each other under one AP
Wall mountable Dust-proof Metal Housing
Enclosed in a metal housing, durable and non-fire hazard for the industrial environment
Dual-PoE with Link Failover
The IEEE 802.3af Power over Ethernet (PoE) compliant design eliminates the need for power sockets, allows installation of this device in areas where power outlets are not readily available to improve deployment flexibility, and provides standard based compatibility with other device
Provides dual-PoE 10/100 Fast Ethernet ports with failover function for redundant connectivity.

Technical specifications Peripheral type Wireless router
Standards 802.11b/g/n (Draft)
Transfer rate 300 Mbps
Frequency range 5 GHz
Routing protocols TCP/IP
Safety features IP access control list
SPI firewall
Content filtering
IPS (Intrusion Prevention System)
Management features SNMP version 1, 2c
Antenna 3
Dimensions 198 x 131 x 198 mm
Weight 0.55 kg
Contents WRVS4400N router, CD-ROM with user manual and QuickVPN software, network cable, power adapter, set-up guide

Technical Specifications Norm IEEE 802.11b, IEEE 802.3af, IEEE 802.11g
Transfer Speed 108 Mbps
Encrypting WEP 64-Bit/128-Bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT
Antenna 2 detachable aerials
Ethernet Power over Ethernet
Size 170 x 205 x 195 mm
Weight 400g
Included Accessories 2 detachable aerials, CD-Rom, Ethernet cable, mains power supply, registration card.

General Device Type Radio access point
Width 17 cm
Depth 4.1 cm
Height 17 cm
Weight 390 g
Networking Form Factor External
Connectivity Technology Wireless
Data Transfer Rate 300 Mbps
Line Coding Format OFDM
Data Link Protocol IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft)
Spread Spectrum Method OFDM, DSSS
Network / Transport Protocol DHCP
Remote Management Protocol SNMP 1, SNMP 2c, HTTP, HTTPS
Frequency Band 2.4 GHz
Status Indicators Link activity, power, link OK
Features DHCP support, power over Ethernet (PoE), load balancing, VLAN support, Syslog support, E-mail alert, MAC address filtering, IPv6 support, firmware upgradable, MIMO technology, Wi-Fi Multimedia (WMM) support, event log, Quality of Service (QoS), RADIUS support, Wi-Fi Protected Setup (WPS)
Encryption Algorithm 128-bit WEP, 64-bit WEP, WPA, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise
Authentication Method Radio Service Set ID (SSID), Basic Service Set Identifier (BSSID)
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.1p, IEEE 802.11b, IEEE 802.3af, IEEE 802.11d, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11n (draft), Wi-Fi Protected Setup
Aerial Antenna External detachable
Antenna Qty 3
Directivity Omni-directional
Gain Level 2 dBi
Expansion / Connectivity Interfaces 1 x network / power – Ethernet 10Base-T/100Base-TX/1000Base-T – RJ-45
Miscellaneous Cables Included 1 x network cable
Compliant Standards CE, IC, FCC
Power Power Over Ethernet (PoE) Yes
Power Device Power adapter – external
Software / System Requirements OS Provided Linux
Environmental Parameters Min Operating Temperature 0 °C
Max Operating Temperature 40 °C
Humidity Range Operating 10 – 85%

General Device Type Wireless router
Form Factor External
Memory RAM 64 MB
Flash Memory 32 MB
Networking Connectivity Technology Wireless, wired
Integrated Switch 4-port switch
Data Link Protocol Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Switching Protocol Ethernet
Network / Transport Protocol TCP/IP, UDP/IP, L2TP, PPPoE
Routing Protocol RIP-1, RIP-2, IGMPv2, IGMP, static IP routing, IGMPv3, GRE
Remote Management Protocol SNMP 2, HTTP, HTTPS
Capacity IPSec VPN tunnels : 5
Status Indicators Port status, power
Features NAT support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), Syslog support, traffic shaping, Stateful Packet Inspection (SPI), DoS attack prevention, VPN passthrough, URL filtering, Low-latency queuing (LLQ), Weighted Fair Queuing (WFQ), Wi-Fi Multimedia (WMM) support, Access Control List (ACL) support, Quality of Service (QoS), Wi-Fi Protected Setup (WPS), DHCP server, wireless bridge mode
Compliant Standards IEEE 802.1Q, IEEE 802.11b, IEEE 802.11g, IEEE 802.11i, Wi-Fi CERTIFIED, IEEE 802.11n
IP Telephony VoIP Functionality VoIP phone adapter
VoIP Protocols SIP v2
Voice Codecs G.711, G.723.1, G.726
Telephony Interfaces 2 phone (FXS), 1 line (FXO)
IP Telephony Features Echo cancellation, comfort noise generation (CNG), voice activity detection (VAD), Caller ID, call waiting, call hold, call transfer, silence suppression, DTMF generation/detection
Aerial Aerial External integrated
Antenna Qty 1
Gain Level 2.2 dBi
Expansion / Connectivity Interfaces 4 x network – Ethernet 10Base-T/100Base-TX – RJ-45 ¦ 1 x network – Ethernet 10Base-T/100Base-TX – RJ-45 ( WAN ) ¦ 1 x phone line – FXO – RJ-11 ¦ 2 x phone line – FXS – RJ-11 ¦ 1 x Hi-Speed USB – 4 PIN USB Type A
Miscellaneous Cables (Details) 1 x network cable ¦ 1 x phone cable
Encryption Algorithm Triple DES, 128-bit WEP, 64-bit WEP, TKIP, WPA, WPA2
Authentication Method RADIUS, Radio Service Set ID (SSID)
Compliant Standards ETSI, CISPR 24, EN 61000-3-2, ICES-003, EN 61000-3-3, EN55024, CISPR 22, EN50082-1, AS/NZS 60950-1, RSS-210, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, FCC Part 15, CS-03, EN 61000-4-5, EN 61000-6-2, EN 61000-4-11, FCC CFR47 Part 15, EN300-386, EN 61000-4-8, UL 60950-1, IEC 60950-1, EN 60950-1
Power Power Device Power adapter – external
Voltage Required AC 120/230 V
Software / System Requirements Software Included Drivers & Utilities
Environmental Parameters Min Operating Temperature 0 °C
Max Operating Temperature 40 °C
Humidity Range Operating 5 – 95%

When operating in CPE (Client) mode, it functions as a Wi-Fi modem gateway to receive wireless signal over the last-mile Internet feed from WISPs. The CPE's bandwidth to the Internet can be assigned by the WISP. When in AP mode, OWL510 operates as an AP station with wall-penetrating high-power signal and long-range coverage to better serve Wi-Fi clients. In addition, it can be set up as a WDS-mesh node by establishing multiple WDS links to bridge neighbor access points together. Coming with business-class security, OWL510 in AP mode is also ideal for enterprise applications. Furthermore, one OWL510 with multiple SSIDs is capable of acting as multiple Virtual APs (VAPs). By tagging the traffic from each VAP with a unique VLAN ID, it allows for segmenting a corporate network using VLANs to protect critical resources. Being a versatile Wi-Fi device, OWL510 does not limit itself to outdoor usage only. When managed by a Controller (such as the WHG-series), it performs as a Wi-Fi base station in either a public or private wireless access deployment.

Características y Beneficios

Rugged, Compact-Sized, and Adaptive to Versatile Environments

Diversified deployments:
Municipal Wi-Fi service
Home Ower Association (HOA), RV parks, and recreation resorts
Hotels, mobile hospitals, and mobile libraries
Shopping malls, airports, harbors, roadways, warehouse, and manufacturing plants
IP68 weather- and water-proof
Housed in durable, rust-resistant metal casing
High Transmit Power and Built-in Patch Antenna

Up to 500mW output power from the board to transmit stronger signals for longer range
Built-in patch antenna for installation convenience and efficiency
LED indicators to display wireless signal strength
High-speed with QoS for Voice, Video, and Data Applications

Equipped with a high-speed IEEE 802.11g wireless network interface based on Atheros™ chipset, transmit rates up to 54Mbps
Backward compatible with 802.11b
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty triple-play (voice, video, and data) applications
Power over Ethernet (PoE) & Flexible Mounting Options

PoE feature reduces the need of additional power cable to the device; a quality Power Supply Equipment (PSE) is bundled in the package
Wall and pole mountable; mounting kit included
Multiple Operation Modes for Different Infrastructures

Two administrator accounts – one for WISP to manage wireless broadband subscribers
Multiple operation modes:
CPE Mode – wireless modem with IP sharing
AP Mode – pure AP
WDS Mode – AP with wireless bridge
Universal Repeater Mode – with MAC NAT
Business-class Security and Multiple-SSID/ VLAN tagging Support

Full range of enterprise-grade wireless security mechanisms such as WEP, WPA and WPA2 (802.11i)
Multiple-SSID capability enables one OWL510 to behave like up to 8 unique Virtual APs (VAPs), the equivalent of 8 wireless Virtual LANs (VLANs) to securely segment wireless network traffic
Support client isolation in public hotspot operation.

When operating in CPE (Client) mode, it functions as a Wi-Fi modem gateway to receive wireless signal over the last-mile Internet feed from WISPs. The CPE's bandwidth to the Internet can be assigned by the WISP. When in AP mode, OWL510 operates as an AP station with wall-penetrating high-power signal and long-range coverage to better serve Wi-Fi clients. In addition, it can be set up as a WDS-mesh node by establishing multiple WDS links to bridge neighbor access points together. Coming with business-class security, OWL510 in AP mode is also ideal for enterprise applications. Furthermore, one OWL510 with multiple SSIDs is capable of acting as multiple Virtual APs (VAPs). By tagging the traffic from each VAP with a unique VLAN ID, it allows for segmenting a corporate network using VLANs to protect critical resources. Being a versatile Wi-Fi device, OWL510 does not limit itself to outdoor usage only. When managed by a Controller (such as the WHG-series), it performs as a Wi-Fi base station in either a public or private wireless access deployment.

Características y Beneficios

Rugged, Compact-Sized, and Adaptive to Versatile Environments

Diversified deployments:
Municipal Wi-Fi service
Home Ower Association (HOA), RV parks, and recreation resorts
Hotels, mobile hospitals, and mobile libraries
Shopping malls, airports, harbors, roadways, warehouse, and manufacturing plants
IP68 weather- and water-proof
Housed in durable, rust-resistant metal casing
High Transmit Power and Built-in Patch Antenna

Up to 500mW output power from the board to transmit stronger signals for longer range
Built-in patch antenna for installation convenience and efficiency
LED indicators to display wireless signal strength
High-speed with QoS for Voice, Video, and Data Applications

Equipped with a high-speed IEEE 802.11g wireless network interface based on Atheros™ chipset, transmit rates up to 54Mbps
Backward compatible with 802.11b
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty triple-play (voice, video, and data) applications
Power over Ethernet (PoE) & Flexible Mounting Options

PoE feature reduces the need of additional power cable to the device; a quality Power Supply Equipment (PSE) is bundled in the package
Wall and pole mountable; mounting kit included
Multiple Operation Modes for Different Infrastructures

Two administrator accounts – one for WISP to manage wireless broadband subscribers
Multiple operation modes:
CPE Mode – wireless modem with IP sharing
AP Mode – pure AP
WDS Mode – AP with wireless bridge
Universal Repeater Mode – with MAC NAT
Business-class Security and Multiple-SSID/ VLAN tagging Support

Full range of enterprise-grade wireless security mechanisms such as WEP, WPA and WPA2 (802.11i)
Multiple-SSID capability enables one OWL510 to behave like up to 8 unique Virtual APs (VAPs), the equivalent of 8 wireless Virtual LANs (VLANs) to securely segment wireless network traffic
Support client isolation in public hotspot operation.

Its dual Power over Ethernet (PoE) ports provides redundant power feeds to increase power supply availability. Hardware Flexibility for Networking and Multi-Radio, External Antenna Connectors. Hardware wise, a single OWL800 is capable of hosting 2-4 multiple radio modules simultaneously. Each module can be used for serving wireless clients, building wireless bridges, or establishing wireless backhauls. For some countries that permit high-power transmission, higher power modules are optionally available. There are 4 N-type antenna connectors extended from the modules on the OWL800 board, which not only gives the flexibility in choosing antennas but greatly simplifies the antenna installation. Software Flexibility for Networking.

Multi-Mode, Multi-Link. AP, Bridge/Mesh Node, Gateway. To support diversified wireless network architectures, the OWL800 provides multiple operating modes, including Point-to-Point Bridge, Point-to-Multipoint Bridge, AP station and AP Gateway. Unlike most of common access points that rely on a single radio for different purposes at one time, the OWL800 with multiple radio modules receives and transmits over-the-air signals for each bridge link or AP station with one dedicated wireless radio to prevent degraded performance.

Características y Beneficios

Rugged for Outdoor or Harsh Environment

Weatherproof and watertight cast-metal housing with an IP68 rating
Surge immunity up to 15KV
Dual PoE for redundant power input and data link
Support multiple operation modes – Gateway mode, AP mode, and Relay mode
Multiple Radios and Antenna Connectors, Flexible for PtP, PtMP, or Mesh networks

Two built-in 802.11 a/b/g radio with two additional mini-PCI slots for expansion
High power radio modules are available options for countries where higher power transmitting is permitted
Low-loss N-type connectors allow for more flexible antenna choices for professionals
Antennas can be attached directly on the OWL800, or connected closely to OWL800, for reducing signal losses
Dual bands (2.4G and 5G) with more channels allow better channel planning to avoid interference
Each Radio module can be configured as AP or WDS independently. Up to four modules can be serving in one OWL800
Built-in AAA and User Management for Hotspot Operation

Support built-in Local accounts and On-demand accounts for user authentication
Support multiple external RADIUS servers for user authentication
Support UAM and IEEE802.1x access control functions
Built-in Hotspot access control and billing features
Robust and Reliable Wireless Link Construction

Dual PoE power input
Support 8 WDS links per 802.11a/b/g radio module
WDS discovery and link table for easy connect
Support VLAN tags over wireless inter-AP links (WDS) in addition to over the wireless links from clients to AP
Dynamic wireless link backup for network reliability
Dedicated WDS radios could form a mesh WLAN without taking away some bandwidth for serving clients
Wireless Security and QoS Support

Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or Pre-Shared Key
Support encryption, including WEP, AES, or TKIP, over wireless inter-AP links (WDS)
Wireless LAN segmentation, Disable SSID Broadcast
Support client-isolation so that clients are isolated from each other under one AP
Support QoS tags over wireless inter-AP links (WDS)
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty multimedia applications such as voice, audio and video
Excellent Solution for Community WLAN

Each AP module is capable of emulating up to 8 virtual APs (VAPs) simultaneously
With the capabilities of multiple-SSID and VLAN tag association, OWL800 allows equipment-sharing among different franchises; moreover, its QoS feature enables differentiated service operations
Multiple OWL800′s can be managed under an external WLAN controller to form a managed WLAN solution.

OWL400 supports multiple operation modes (AP/Bridge/CPE) and works well as a last-mile solution for wireless ISPs (WISPs). When in AP mode , OWL400 operates as an AP station with wall-penetrating high-power signal and long-range coverage to better serve Wi-Fi clients. In addition, it can be set up as a WDS node by establishing multiple WDS links to bridge neighbor access points together.

Coming with business-class security, OWL400 in AP mode is also ideal for enterprise applications. Furthermore, one OWL400 with multiple SSIDs is capable of acting as multiple Virtual APs (VAPs). By tagging the traffic from each VAP with a unique VLAN ID, it allows for segmenting a corporate network using VLANs to protect critical resources.

When operating in CPE (Client) mode , it functions as a Wi-Fi modem gateway to receive wireless signal over the last-mile Internet feed from WISPs. The CPE's bandwidth to the Internet can be assigned by the WISP.

Being a versatile Wi-Fi device, OWL400 does not limit itself to outdoor usage only. When managed by a Controller (such as the WHG-series), it performs as a Wi-Fi base station in either a public or private wireless access deployment.

Rugged, Compact-Sized, and Adaptive to Versatile Environments
Diversified deployments:
Municipal Wi-Fi service
Home Owner Association (HOA), RV parks, and recreation resorts
Hotels, mobile hospitals, and mobile libraries
Shopping malls, airports, harbors, roadways, warehouse, and manufacturing plants
IP68 weather- and water-proof, housed in durable, rust-resistant metal casing
High Transmit Power and N-type Connector
Up to 200mW output power from the board to transmit stronger signals for longer range
N-type connector allows for choosing suitable antenna types and gains with flexibility
High-speed with QoS for Voice, Video, and Data Applications
Equipped with a high-speed IEEE 802.11n/a chipset, supporting transmit rate up to 300Mbps
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty triple-play (voice, video, and data) applications
Power over Ethernet (PoE) & Flexible Mounting Options
PoE feature reduces the need of additional power cable to the device; a quality Power Supply Equipment (PSE) is bundled in the package
Wall and pole mountable; mounting kit included
Multiple Operation Modes for Different Infrastructures
Two administrator accounts – one for WISP to manage wireless broadband one for subscribers
Multiple operation modes:
AP Mode – pure AP
WDS Mode – AP with wireless bridge
Universal Repeater Mode – with MAC NAT
CPE Mode – wireless modem with IP sharing
Business-class Security and Multiple-SSID/ VLAN tagging Support
Full range of enterprise-grade wireless security mechanisms such as WEP, WPA and WPA2 (802.11i)
Multiple-SSID capability enables one OWL400 to behave like up to 7 unique APs, the equivalent of 7 wireless Virtual LANs (VLANs) to securely segment wireless network traffic
Support client isolation in public hotspot operation

The IP68-rated metal sealed CPE100 is compact in size and weatherproof. Coming with a mounting kit, it can be mounted on a pole or wall. It is suitable for both indoor and outdoor usage with its 200mW output power.

The CPE 100 can be deployed in various environments, for example:

• Outdoor access point for school campuses, enterprise campuses, or manufacture plants.
• Wireless CPE for MDU/ MTU, such as apartments, dormitories, and office complexes.
• Indoor access point for hotels, factories, or warehouses where metal industrial grade devices are preferred.
• Public hotspot operation for café, parks, convention centers, shopping malls, or airports.
• Wireless coverage for both indoor and outdoor ground for private resorts, acre estate/home's yards, or golf course communities.

A WISP Deployment Example

Acts as a “Wireless Modem” to bring wireless bandwidth to home and office buildings.
Wireless Bandwidth Allocation (uplink/downlink) delivered to each building depending on different subscription plans.
Full range of wireless security mechanisms such as WEP, WPA and WPA2 (802.11i) that are important for enterprise wireless deployments.
Acts as a Home Router for IP Sharing and firewall, all-in-one installation solution.
Weatherproof and watertight from its rugged aluminum housing (IP68 Approved).
Power over Ethernet (PoE) built-in for single cable installation.
On board Ethernet surge protection.
Multi-mode Support:
CPE Mode
AP Mode
WDS Mode
Universal Repeater (Bridge) Mode

The IP68-rated metal sealed CPE110 is compact in size and weatherproof. Coming with a mounting kit, it can be mounted on a pole or wall. It is suitable for both indoor and outdoor usage with its 200mW output power.

The CPE 100 can be deployed in various environments, for example:

• Outdoor access point for school campuses, enterprise campuses, or manufacture plants.
• Wireless CPE for MDU/ MTU, such as apartments, dormitories, and office complexes.
• Indoor access point for hotels, factories, or warehouses where metal industrial grade devices are preferred.
• Public hotspot operation for café, parks, convention centers, shopping malls, or airports.
• Wireless coverage for both indoor and outdoor ground for private resorts, acre estate/home's yards, or golf course communities.

A WISP Deployment Example

Acts as a “Wireless Modem” to bring wireless bandwidth to home and office buildings.
Wireless Bandwidth Allocation (uplink/downlink) delivered to each building depending on different subscription plans.
Full range of wireless security mechanisms such as WEP, WPA and WPA2 (802.11i) that are important for enterprise wireless deployments.
Acts as a Home Router for IP Sharing and firewall, all-in-one installation solution.
Weatherproof and watertight from its rugged aluminum housing (IP68 Approved).
Power over Ethernet (PoE) built-in for single cable installation.
On board Ethernet surge protection.
Multi-mode Support:
CPE Mode
AP Mode
WDS Mode
Universal Repeater (Bridge) Mode

> Free to View HD Digital TV

> 780p /1080i Resolutions

> Digital Radio and Data Channels

> Automatic Channel Search

> HDMI Output

> Single Scart Socket

> Connects to existing aerial system and TV

Description: Outdoor antenna

Frequency range: Digital terrestrial TV

Coverage: 24 dB

Dimensiones
Height: 75 cm
Width: 54 cm
Depth: 128.2 cm

Weight With packaging: 3 kg

Content Mounting kit, connectors and coaxial cable