Caratteristiche

1.Actual gamma di test raggiungibile fino a 50 km
2.High un throughput fino a 40Mbps
3.Support Bridge (PTP, PTMP)
4.High sicurezza (AES)
5.Ease di installazione (Real Link Test di tempo per RSSI locale e remota)
6.Transmit Power Control
7.Bandwidth controllo (40/20/10/5 MHz)
8.Wireless TDMA (TDD Mode)
9.VLAN Pass-through Support
10.IP67 Enclosure nominale in metallo impermeabile esterna con design Vent

Specificazioni

Senza fili
Standard proprietario
Banda di frequenza 5120 ~ 6060MHz
Modulazione 64QAM 3/4, 64QAM 2/3, 16QAM 3/4, 16QAM 1/2, QPSK 3/4, QPSK 1/2, BPSK 3/4, BPSK 1/2
Velocità di trasmissione dati fino a 40Mbps entro 50 km
Canale Bandwidth 5/10/20 MHz
Sicurezza WEP / AES Encryption
Sensibilità -92 dBm
Potenza di uscita 23dBm
Transmit Power Control 5 livelli
Modalità operativa Bridge (PTP, PtMP)

Software Caratteristiche DFS

Collegamento strumento diagnostico (Real Time locale e remota RSSI)
Spanning Tree (STP)
802.1Q VLAN pass through
NTP Client

Gestione

Web-Based Management
Firmware aggiornabile Remote
Supporto SNMP V2 (Private MIB, 802.11 MIB)
CLI
Backup / Ripristino
Registro di sistema
Remote Log Server
Hardware Watch Dog

Hardware

Processor Intel IXP422 266MHz Atheros2414
Flash 16MB SDRAM 32MB
LED Indication Power, Ethernet ,Wireless, RSSI (5 LEDs)
Antenna connettore 1 x connettore NTYPE

Ethernet

10/100BASE-TX auto-negotiation Ethernet port x 1 (RJ-45 connector)
Auto MDI/MDI-X enabled, IEEE802.3af Power Over Ethernet Compatible

Ambiente

Operating Temperature: -30 °C ~ 80 °C
Temperatura di stoccaggio: -30 ° C ~ 85 ° C
Humidity: 100%(non condensing)
Alimentazione 802.3af PoE, 48V 0.35A
Impermeabile
IP67 Certificated
Montaggio a parete, per montaggio su palo, il Monte Pole opzionale per palo della luce
Dimensioni 259 (L) x 250 (W) x 75 (H) mm

Caratteristiche

1.Actual gamma di test raggiungibile fino a 50 km
2.High un throughput fino a 40Mbps
3.Support Bridge (PTP, PTMP)
4.High sicurezza (AES)
5.Ease di installazione (Real Link Test di tempo per RSSI locale e remota)
6.Transmit Power Control
7.Bandwidth di controllo (5/10/20 MHz)
8.Wireless TDMA (TDD Mode)
9.VLAN Pass-through Support
10.IP67 Enclosure nominale in metallo impermeabile esterna con design Vent

Specificazioni

Senza fili
Standard proprietario
Banda di frequenza 2412-2472MHz
Modulazione 64QAM 3/4, 64QAM 2/3, 16QAM 3/4, 16QAM 1/2, QPSK 3/4, QPSK 1/2, BPSK 3/4, BPSK 1/2
Velocità di trasmissione dati fino a 40Mbps entro 50 km
Canale Bandwidth 5/10/20 MHz
Sicurezza WEP / AES Encryption
Sensibilità -92 dBm
Potenza di uscita 23dBm
Transmit Power Control 5 livelli
Modalità operativa Bridge (PTP, PtMP)

Software Caratteristiche DFS

Collegamento strumento diagnostico (Real Time locale e remota RSSI)
Spanning Tree (STP)
802.1Q VLAN pass through
NTP Client

Gestione

Web-Based Management
Firmware aggiornabile Remote
Supporto SNMP V2 (Private MIB, 802.11 MIB)
CLI
Backup / Ripristino
Registro di sistema
Remote Log Server
Hardware Watch Dog

Hardware

Processor Intel IXP422 266MHz Atheros2414
Flash 16MB SDRAM 32MB
LED Indication Power, Ethernet ,Wireless, RSSI (5 LEDs)
Antenna connettore 1 x connettore NTYPE

Ethernet

10/100BASE-TX auto-negotiation Ethernet port x 1 (RJ-45 connector)
Auto MDI/MDI-X enabled, IEEE802.3af Power Over Ethernet Compatible

Ambiente

Operating Temperature: -30 °C ~ 80 °C
Temperatura di stoccaggio: -30 ° C ~ 85 ° C
Humidity: 100%(non condensing)
Alimentazione 802.3af PoE, 48V 0.35A
Impermeabile
IP67 Certificated
Montaggio a parete, per montaggio su palo, il Monte Pole opzionale per palo della luce
Dimensioni 259 (L) x 250 (W) x 75 (H) mm

Specifiche elettriche
MODELLO KC16T
Potenza massima 16W
Tolleranza +15% / -5%
Potenza massima 17.4V Tensione
Potenza massima Corrente 0.93A
Tensione di circuito aperto 21.7V
1.00A corrente di corto circuito
Dimensioni 517 x 280 x 17 mm
Mass 1.6kg

Specifiche elettriche
MODELLO KC21T
Potenza massima 21W
Tolleranza +15% / -5%
Potenza massima 17.4V Tensione
Potenza massima Corrente 1.21A
Tensione di circuito aperto 21.7V
1.30A corrente di corto circuito
Dimensioni 367 x 512 x 17 mm
Mass 2,0 kg

Efficienza%: 15
Dimensioni (L x W x H) (mm): 512 X 517 X 17
Peso (kg): 2.8
Max. Out Potenza (Watt): 32
Max. Tensione (VmpV): 17,4
Max. Alimentazione di corrente (Imp A): 1,84
Tensione a circuito aperto (Voc V): 21,7
Corrente di corto circuito (ISC A): 1,99

Efficienza%: 15
Dimensioni (L x W x H) (mm): 652 X 639 X 54
Peso (kg): 5,0
Max. Out Potenza (Watt): 54
Max. Tensione (VmpV): 17,4
Max. Alimentazione di corrente (Imp A): 3,11
Tensione a circuito aperto (Voc V): 21,7
Corrente di corto circuito (ISC A): 3,31

PERFORMANCE ELETTRICO
Tipo di modulo fotovoltaico KC65GX-2P
A 1000 W / m² (STC) *
Potenza massima [W] 65
Tensione massima di sistema [V] 750
Tensione massima [V] 17,4
Potenza massima di corrente [A] 3,75
Tensione a vuoto aperto (Voc) [V] 21,7
Corrente di corto circuito (ISC) [A] 3,99
DIMENSIONI 751 x 652 x 36mm
PESO 6KG

PERFORMANCE ELETTRICO
Tipo di modulo fotovoltaico KC85
A 1000 W / m² (STC) *
Potenza massima [W] 85
Tensione massima di sistema [V] 750
Tensione massima [V] 17,4
Potenza massima di corrente [A] 5,02
Tensione a vuoto aperto (Voc) [V] 21,7
Corrente di corto circuito (ISC) [A] 5,34
DIMENSIONI 1007 x 652 x 36mm
PESO 8.3KG

PERFORMANCE ELETTRICO
Tipo di modulo fotovoltaico KC135
A 1000 W / m² (STC) *
Potenza massima [W] 135
Tensione massima di sistema [V] 1000
Tensione massima [V] 23,6
Potenza massima di corrente [A] 6,26
Tensione a vuoto aperto (Voc) [V] 26,5
Corrente di corto circuito (ISC) [A] 6,98
DIMENSIONI 1338 x 990 x 46mm
PESO 16KG

PERFORMANCE ELETTRICO
Tipo di modulo fotovoltaico KD210
A 1000 W / m² (STC) *
Potenza massima [W] 210
Tensione massima di sistema [V] 1000
Tensione massima [V] 26,6
Potenza massima di corrente [A] 7,9
Tensione a vuoto aperto (Voc) [V] 33,2
Corrente di corto circuito (ISC) [A] 8,58
DIMENSIONI 1500 x 990 x 46mm
Peso 18kg

PERFORMANCE ELETTRICO
Tipo di modulo fotovoltaico KD70
A 1000 W / m² (STC) *
Potenza massima [W] 70
Tensione massima di sistema [V] 750
Tensione massima [V] 17,9
Potenza massima di corrente [A] 3,13
Tensione a vuoto aperto (Voc) [V] 22,1
Corrente di corto circuito (ISC) [A] 4.3
DIMENSIONI 778 x 660 x 44mm
PESO 6,5 kg

PERFORMANCE ELETTRICO
Tipo di modulo fotovoltaico KD95
A 1000 W / m² (STC) *
Potenza massima [W] 95
Tensione massima di sistema [V] 750
Tensione massima [V] 17,9
Potenza massima di corrente [A] 5,31
Tensione a vuoto aperto (Voc) [V] 22,1
Corrente di corto circuito (ISC) [A] 5,81
DIMENSIONI 1043 x 660 x 44mm
PESO 8.5kg

HSG1200 è ideale anche per applicazioni ospitalità. Ad esempio, un hotel può utilizzare la funzione di zona di servizio per separare i privilegi del personale, ospiti e VIP di utilizzo per l'accesso a Internet.

Il HSG1200 integrato nel on-demand capacità di generazione di conto è facile da usare da cassieri o receptionist. Ogni account guest è associata a un prezzo e una quota di utilizzo, sia dal tempo o volume. Inoltre, HSG1200 funziona con il server RADIUS esistente, se di fatturazione centrale era stata attuata da parte dell'operatore.

Facilità di installazione e funzionamento

• Supporta varie opzioni di distribuzione a banda larga (T1, DSL, Cable) via IP statico, DHCP, PPPoE e PPTP
• Built-in database utente fornisce una capacità sufficiente considerazione per diversi scenari operativi
• Funziona con generatore di conti immediata per fornire account utente per i visitatori-based, on-demand operazioni
• Il bilanciamento del carico e failover WAN migliorare l'utilizzo della larghezza di banda e fornire connessione a Internet più affidabile

Funzioni di sicurezza integrate

• Basata su standard crittografia dei dati e l'autenticazione degli utenti: SSL, IEEE 802.1X, WPA-RADIUS
• Secure Guest e l'accesso come amministratore tramite web-based login e amministrazione su SSL
• Politiche di filtraggio dei pacchetti configurabile migliorare il traffico di dati di sicurezza
• Built-in protezione DoS impedisce agli hacker malintenzionati dal collasso della rete

User Management efficace

• Compilare le caselle meccanismo di autenticazione non autenticato agli utenti di guadagnare l'accesso alla rete
• Politiche di controllo basati sui ruoli e policy-based di migliorare la protezione contro utenti malintenzionati
• "On-line elenco degli utenti" monitora in tempo reale lo stato di ogni singolo utente
• Consente di scadenza per la sessione di controllo on-demand agli utenti in volume tempo e di dati

Contabilità e fatturazione flessibili

• Profili di fatturazione programmabili permettere agli operatori di personalizzare i piani tariffari per gli utenti on-demand
• Controllo della larghezza di banda consente di classe di servizio per i diversi livelli di utenti e massimizzare i profitti
• RADIUS VSA (attributi specifici del fornitore) l'attuazione aggiunge flessibilità per il controllo contabile e la sessione con server RADIUS
• Informazioni dettagliate per utente storia log del traffico per l'analisi e la registrazione dei dati
• Billing Report fornisce un riepilogo delle registrazioni delle transazioni on-demand per gli utenti

Networking

• Supporta Router, modalità NAT
• Supporta IP statico, DHCP, PPPoE, PPTP Dial-up
• Supporta IP Plug and Play (PnP IP)
• Built-in DHCP Server e il supporto per DHCP relay
• Supporta NAT:
• IP / Redirezione Porta di destinazione
• DMZ Server Mapping
• Server Mapping virtuale
• Configurabile route statica
• Supporta servizio di posta elettronica tramite il server di posta elettronica indicato
• Supporta Walled Garden
• Walled Garden Pubblicità List permette link di siti web pubblicità sulla pagina del portale login
• Supporta indirizzo MAC Pass-Through
• Supporta Proxy HTTP
• Supporta la connessione Ethernet a server terminal esterni
• Supporto doppio uplink, bilanciamento del carico e failover in uscita per la connessione a Internet più affidabile
• Supporto SIP pass-through NAT

Sicurezza

• Supporta gli standard di sicurezza: SSL, IEEE 802.1X e WPA-RADIUS
• Supporta VPN pass-through (IPSec e PPTP)
• Built-in protezione dagli attacchi DoS
• Supporta site-to-site VPN tunnel
• Supporta Lista di controllo di accesso MAC
• Lista nera configurabile dall'utente
• Consente l'indirizzo MAC e l'identità vincolante utente per l'autenticazione utente locale

Servizio Zone

• La rete è suddivisa in massimo 9 zone di servizio, ciascuno definito da un tag VLAN
• Ogni zona ha il suo servizio
• pagina di login del portale
• Opzioni di autenticazione
• Interfaccia LAN Indirizzo IP
• DHCP intervallo di indirizzi
• Ogni zona servizio consente l'accesso ai gruppi selezionati
• Ogni zona di servizio assegna un criterio di rete per ogni gruppo di utenti

Gestione degli utenti

• Supporta 3.000 account locali
• Supporta 2.000 on-demand conti
• Supporto simultaneo di più metodi di autenticazione (account locali e on-demand, POP3, LDAP, RADIUS, NT Domain)
• Policy-Based Access Control (per-assegnazioni di ruolo basati su politiche firewall, routing, Pianificazione Login, Banda, del contingente, e sessione)

1. User Session Management:
2. SSL protetta login pagina del portale
3. Supporta login multipli con un singolo account
4. Sessione timer di inattività
5. Session e la scadenza di controllo conto
6. Notifica e-mail per fornire un collegamento ipertestuale alla pagina di login del portale
7. Supporto Single Sign-On per Windows Domain
8. Accedi cornice controllo in tempo
9. Sessione limite

Contabilità e fatturazione

• Fornisce piani di fatturazione per i conti on-demand
• Consente di scadenza per la sessione di controllo on-demand conti da tempo (ora) e il volume di dati (MB)
• Informazioni dettagliate per utente storia del traffico in base al volume di tempo e dati relativi ai conti locali e on-demand
• Bollettino del traffico storia in automatico una e-mail all'amministratore
• Supporto RADIUS VSA (attributi specifici del fornitore) l'applicazione per la contabilità del traffico e sessione di controllo
• Supporta pagamento con carta di credito tramite gateway di pagamento esterne (Authorize.Net, PayPal, SecurePay, WorldPay)

System Administration

• Gestione basata sul Web UI
• Login e logout personalizzabile pagina del portale
• Il supporto per SNMP v1, v2c
• SSH gestione remota
• L'aggiornamento remoto del firmware
• NTP tempo di sincronizzazione
• Menu guidato console di gestione dell'interfaccia
• Utilità per il backup e il ripristino della configurazione del sistema

Monitoraggio e reporting

• Monitoraggio dello stato online degli utenti
• IP-based di monitoraggio dei dispositivi
• Connessione WAN avviso di errore
• Supporta server esterno Syslog per la diagnosi e la risoluzione dei problemi
• Supporta la registrazione del traffico utente storia
• Supporta il traffico sessione utente (TCP / UDP) Il disboscamento
• Supporta locale report di utilizzo mensile utente

Fisica e di alimentazione

• Power Adapter: 100 ~ 240 VAC, 50/60 Hz
• Fattore di forma: 19 "1U Rack Mount
• Dimensioni (L x P x A): 16.9 "x 6.1" x 1.7 "(430 mm x 155 mm x 43 mm)
• Peso: 3,3 lbs (1,5 kg)

Specifiche Hardware

• Porte WAN: 2 x 10/100BASE-TX RJ-45
• Porte LAN: 4 x 10/100BASE-TX RJ-45
• Console Port: 1 x RS-232 DB9
• Indicatori LED: 1 Potenza x, uno stato x, 2 x WAN, 4 x LAN

Ambiente

• Temperatura di esercizio: 0 ~ 40 ° C
• Temperatura di stoccaggio: -20 ~ 65 ° C

Certificazioni

• CE, FCC
• RoHS compliant

Contenuto della confezione

• HS1200 x 1
• CD-ROM (Manuale d'uso e guida di installazione rapida) x 1
• Guida di installazione rapida (QIG) x 1
• Console Cable x 1
• Cavo Ethernet x 1
• Straight-through Ethernet Cable x 1
• Adattatore di alimentazione (DC 12V) con cavo di alimentazione x 1
• Staffa di montaggio su rack (con viti) x 1

HSG3200 è ideale anche per applicazioni ospitalità. Ad esempio, un hotel può utilizzare la funzione di zona di servizio per separare i privilegi del personale, ospiti, VIP, e l'utilizzo convenzione per l'accesso a Internet.

Il HSG3200 integrato nel on-demand capacità di generazione di conto è facile da usare da cassieri o receptionist. Ogni account guest è associata a un prezzo e una quota di utilizzo, sia dal tempo o volume. Inoltre, HSG3200 funziona con il server RADIUS esistente, se di fatturazione centrale era stata attuata da parte dell'operatore.

Caratteristiche e Vantaggi

Facilità di installazione e funzionamento

Supporta varie opzioni di distribuzione a banda larga (T1, DSL, Cable) via IP statico, DHCP, PPPoE e PPTP
Built-in database utente fornisce una capacità sufficiente considerazione per diversi scenari operativi
Funziona con generatore di conti immediata per fornire account utente per i visitatori-based, on-demand operazioni
Il bilanciamento del carico e failover WAN migliorare l'utilizzo della larghezza di banda e fornire connessione a Internet più affidabile
Funzioni di sicurezza integrate

Basata su standard crittografia dei dati e l'autenticazione degli utenti: SSL, IEEE 802.1x, WPA-RADIUS
Secure Guest e l'accesso come amministratore tramite web-based login e amministrazione su SSL
Politiche di filtraggio dei pacchetti configurabile migliorare il traffico di dati di sicurezza
Built-in protezione DoS impedisce agli hacker malintenzionati dal collasso della rete
User Management efficace

Compilare le caselle meccanismo di autenticazione non autenticato agli utenti di guadagnare l'accesso alla rete
Politiche di controllo basati sui ruoli e policy-based aumenta la protezione contro utenti malintenzionati
"On-line elenco degli utenti" monitora in tempo reale lo stato di ogni singolo utente
Consente di scadenza per la sessione di controllo on-demand agli utenti in volume tempo e di dati
Contabilità e fatturazione flessibili

Profili di fatturazione programmabili permettere agli operatori di personalizzare i piani tariffari per gli utenti on-demand
Controllo della larghezza di banda consente di classe di servizio per i diversi livelli di utenti e massimizzare i profitti
RADIUS 4ipnet VSA (attributi specifici del fornitore) l'attuazione aggiunge flessibilità per il controllo contabile e la sessione con server RADIUS
Informazioni dettagliate per utente storia log del traffico per l'analisi e la registrazione dei dati
Billing Report fornisce un riepilogo delle registrazioni delle transazioni on-demand per gli utenti.

Prezzo a Ora

Per aprire un negozio hotspot è a portata di mano con HSG100 collega al tubo Internet via ADSL / satellitare / via cavo modem. HSG100 porta anche in un vantaggio in più - il montabile a parete, a prova di polvere (IP50) contenitore metallico.

Il HSG100 è la più economica, ma ricco di funzionalità Wireless Hotspot Gateway, puntando mini-size negozi che vogliono offrire alle piccole, unico punto di servizio di accesso wireless a Internet. HSG100 è una scelta perfetta per i principianti per la gestione delle imprese hotspot. Non costa una fortuna per comprare un mucchio di materiale, né prendere le competenze di un esperto per incollare più applicazioni fuori di freeware multipla. Per un auto-proprietario che possiede i piccoli negozi uno o più, che serve di servizio internet wireless non è magia via HSG100. Molte auto-negozio e le cliniche dentali trovare un HSG100 in servizio rende i tempi di attesa dei loro clienti una brezza. Coffee shop di piccole dimensioni possono offrire time-based service hotspot complimento o da cedole pagate da ora a proprio agio. Per i piccoli studi professionali, quali società di revisione contabile o di diritto che richiedono alto livello di sicurezza di rete, un HSG100 standalone consente agli uffici di fornire un servizio Internet gestito ai loro clienti o visitatori in modo isolato, a titolo gratuito, mentre in modo sicuro per impedire l'accesso non autorizzato alla intranet.

Caratteristiche e Vantaggi

Facilità di installazione e funzionamento

Supporta varie opzioni di distribuzione a banda larga (T1, DSL, Cable) via IP statico, DHCP e PPPoE
Punto di accesso integrato consente l'accesso Wi-Fi ed elimina la necessità di un dispositivo aggiuntivo
Built-in database utente fornisce una capacità sufficiente considerazione per diversi scenari operativi
Lavora con generatore di account di instant fornire account utente per i visitatori-based, on-demand operazioni
Funzioni di sicurezza integrate

Basata su standard crittografia dei dati e l'autenticazione degli utenti: WEP, WPA, WPA2, IEEE 802.1X
Secure Guest e l'accesso come amministratore tramite web-based login e amministrazione su SSL
Politiche di filtraggio dei pacchetti configurabile migliorare il traffico di dati di sicurezza
Built-in protezione DoS impedisce agli hacker malintenzionati dal collasso della rete
User Management efficace

Compilare le caselle meccanismo di autenticazione non autenticato agli utenti di guadagnare l'accesso alla rete
Politiche di controllo basati sui ruoli e policy-based aumenta la protezione contro utenti malintenzionati
"On-line elenco degli utenti" monitora in tempo reale lo stato di ogni singolo utente
Consentire la scadenza della sessione per il controllo on-demand agli utenti in volta
Contabilità e fatturazione flessibili

Profili di fatturazione programmabili permettere agli operatori di personalizzare i piani tariffari per gli utenti on-demand
Controllo della larghezza di banda consente di classe di servizio per i diversi livelli di utenti e massimizzare i profitti
Informazioni dettagliate per utente storia log del traffico per l'analisi e la registrazione dei dati

Ricco di funzionalità per il funzionamento hotspot, HSG200 viene fornito con built-in 802.11n/b/g punto di accesso, server web e le pagine web per i clienti di accedere, facile logo-marchio di carico per un negozio di hotspot, semplice utente / visitatore conto strumento di gestione, piani di pagamento, PayPal gateway di carta di credito, i registri del traffico, la condivisione di IP ed ecc Dotato di 4ipWES (Press-n-Connect), la tecnologia, la HSG200 è in grado di istituire un nesso automatico WDS con un massimo di 2 punti di accesso con il semplice tocco di un pulsante . Estendere la copertura wireless di rete è un gioco da ragazzi. Per aprire un negozio hotspot è a portata di mano con HSG200 collega al tubo Internet via ADSL / satellitare / via cavo modem. HSG200 porta anche in un vantaggio in più - il montabile a parete, a prova di polvere (IP50) contenitore metallico.

Per un auto-proprietario che possiede i piccoli negozi uno o più, che serve di servizio internet wireless non è magia via HSG200. Molte auto-negozio e le cliniche dentali trovare un HSG200 in servizio rende i tempi di attesa dei loro clienti una brezza. Coffee shop di piccole dimensioni possono offrire time-based service hotspot complimento o da cedole pagate da ora a proprio agio. Per i piccoli studi professionali, quali società di revisione contabile o di diritto che richiedono alto livello di sicurezza di rete, un HSG200 standalone consente agli uffici di fornire un servizio Internet gestito ai loro clienti o visitatori in modo isolato, a titolo gratuito, mentre in modo sicuro per impedire l'accesso non autorizzato alla intranet.

2.4GHz 2 x 2 Antenna campo MIMO sostituibile & Compatibile con 802.11n/b/g

* Il disegno diversità dell'antenna aumenta l'affidabilità della connessione per migliorare la capacità di trasmissione dei dati.
* Due antenne staccabili per una copertura wireless ottimale e la sostituzione di flessibilità sul campo.
* Dotato di una rete ad alta velocità IEEE 802.11n/b/g interfaccia wireless, velocità di trasmissione fino a 300Mbps.

Facilità di installazione e funzionamento

* Supporto per varie opzioni di distribuzione a banda larga (T1, DSL, Cable) tramite IP statico, DHCP e PPPoE.
* Punto di accesso integrato consente l'accesso Wi-Fi ed elimina la necessità di un dispositivo aggiuntivo.
* Built-in database utente fornisce una capacità sufficiente considerazione per diversi scenari operativi.
* Lavorare on-demand generatore di conti di fornire account utente per i visitatori-based, on-demand operazioni.

Funzioni di sicurezza integrate

* Basato su standard crittografia dei dati e l'autenticazione degli utenti: WEP, WPA, WPA2, IEEE 802.1X.
* Secure Guest e l'accesso come amministratore tramite web-based login e amministrazione su SSL.
Politiche di filtraggio dei pacchetti * I configurabili migliorare il traffico di dati di sicurezza
4ipWES (Press-n-Connect) con pulsante consente una rapida / auto link WDS.
* Built-in di protezione DoS impedisce agli hacker malintenzionati di collassare la rete.

User Management efficace

* Completare blocchi meccanismo di autenticazione degli utenti non autenticati di accedere alla rete.
* Le politiche di controllo basati sui ruoli e policy-based aumenta la protezione contro utenti malintenzionati.
* "On-line elenco degli utenti" monitora in tempo reale lo stato di ogni singolo utente.
* Permettere la scadenza della sessione per il controllo on-demand agli utenti in volta.

Contabilità e fatturazione flessibili

* I profili di fatturazione programmabili permettere agli operatori di personalizzare i piani tariffari per l'on-demand agli utenti.
* Controllo della larghezza di banda consente di classe di servizio per i diversi livelli di utenti e massimizzare i profitti.
* Informazioni dettagliate per utente storia log del traffico per l'analisi e conservazione dei documenti.

Il HSG200-P 4ipnet Wi-Fi Hotspot Kit è una soluzione economica ma ricco di funzioni all-in-una soluzione pronta per l'uso hotspot destra, fuori dalla scatola. E 'la soluzione più economica per mini-scala commerciale hotspot. Il compatto HSG200 Wireless Hotspot Gateway, con IEEE 802.11n/b/g, 2 × 2 MIMO, Power over Ethernet (PoE) e IP50 antipolvere corpo in metallo, si rivolge specialmente mini-size negozi che vogliono offrire alle piccole, single- Punto di servizio di accesso wireless a Internet. Con il built-in database utente e piani tariffari personalizzabili, permette la generazione conto su richiesta al banco del cassiere. Espansione della rete è semplice con la HSG200; gestori degli HotSpot, che desiderano estendere la copertura wireless può farlo con il semplice tocco di un pulsante, con tecnologia proprietaria 4ipnet, il 4ipWES Press-n-Connect per la configurazione WDS facile, il HSG200 stabilisce automaticamente una connessione crittografata AES connessione con i punti di accesso 4ipnet, senza fatica e in modo sicuro espansione della rete.

Il 4ipnet NetTicketGen Hotspot Generator Ticket Network, composto da SDS100 Server Smart Device e PRT100 stampante POS, on-demand semplifica la creazione di account e processi di fatturazione tramite pulsante generazione di account e biglietto stampa della ricevuta. Il SDS100 genera on-demand conti attivando i piani di fatturazione nel HSG200 e istruisce il PRT100 stampare i biglietti corrispondente account. Frontline operazione hotspot è immediatamente semplificata; receptionist e cassieri in grado di fornire ai clienti o ospiti in visita con le ricevute di accesso premendo alcuni pulsanti sui SDS100, bypassando la configurazione manuale del gateway. Tutti 4ipnet WHG / HSG dispositivi sono compatibili e si integrano facilmente con la NetTicketGen; Ogni WHG / HSG dispositivo può supportare simultaneamente set NetTicketGen più attraverso la rete locale.

Fare un po 'di denaro sul lato!

Mantieni i tuoi clienti e gli ospiti felice, rendendo un po 'di denaro sul lato, fornendo loro accesso a Internet WiFi. Un sistema di bigliettazione WiFi può prendersi cura di tutto, dalla fatturazione alla sicurezza. Il HSG200 + SDS100 sistema da poco conosciuto 4ipnet ditta abbastanza buono per la tua azienda? Leggi la nostra recensione per scoprirlo.

4ipnet di HSG200 hotspot wireless e biglietteria kit è una coppia molto più grave-looking di prodotti poi sistema concorrente ticketing ZyXEL. Sembra più da uomo d'affari con un rivestimento nero sobrio. The kit includes the HSG200 router and the SDS100 ticketing controller, to which you connect the provided thermal ticket printer using the included RS-232 cable. Both the HSG200 and SDS100 are ruggedised, with steel cases and mounting points to make them easy to secure to a wall or desk. Even the ticket printer has a reassuringly solid feel to it.

The main HSG200 unit is a relatively simple router with a WAN port, 2.4GHz 300Mbit/s 802.11n wireless and two 10/100Mbit/s LAN ports – one for your private network and one for your public network. More importantly, as well as simultaneous private and public networks, it has a lot of extra options that help you control the ticketing system, pricing and payment processing if you want to allow users to purchase access by debit or credit card.

The SDS100 has buttons allowing you to select from up to ten different ticket plans – the pricing and duration of each plan can be configured to suit your needs. You can connect multiple ticketing units to a single HSG200 router, allowing tickets to be sold from multiple tills or locations, but you'll need to connect them via an Ethernet switch to the single private network LAN port.

Basic setup and configuration was gratifyingly simple, although the single private LAN port makes it slightly more complicated than it has to be. If you don't have a switch, it's advisable to sort out the router's initial configuration via a LAN connection before you connect the ticketing console.

Once you've run through the router's simple web-based configuration wizard and connected the SDS100 to the private LAN port, the system is immediately functional, albeit in a basic way. Of course, further configuration is absolutely necessary, like setting up your desired security settings for both public and private wireless networks – we suggest WPA2 for the private network and open for the public one – you can carry out further configuration wirelessly with ease.

A basic firewall allows you to control traffic in and out of the public network, which is of primary importance. A routing table allows you to configure your NAT settings for more complicated routing, but we would recommend giving a guest access system of this kind its own dedicated internet connection without access to the rest of your network, rather than using the HSG200 to handle all your public and secure private routing requirements.

Alongside these features is a nicely implemented Quality of Service (QoS) system, which allows you define maximum up and downstream connection speeds for a few different kinds of traffic, such as video and voice. There's also support for various DDNS providers, although we don't recommend enabling remote access to the device unless absolutely necessary, as well as a few network inspection and status tools.

The HSG200′s most important features are handled in its Users menu, where clear sub-menus make it easy to assign different types of access ticket to each of the HSG200′s 10 options. Tickets can be defined with different durations and prices; you can also choose to have them expire at certain times and even upload a logo image to be printed on your tickets. If you set up an external payment gateway, guests can pay for access on their credit card when they log on to your network, rather than having to buy a ticket in person at the till. Payment can be processed via Authorize.Net, PayPal, SecurePay or WorldPay.

With more powerful hardware, WHG401 is capable of centrally managing 190 access points (150 x EAP700 + 40 x other 4ipnet single radio AP) to cover a wider service area in a smaller network.

Simplified Deployment and Reliable Internet Connection
Gigabit Ethernet to meet higher data rate demands of larger networks
Easy to deploy, highly scalable platform allows overlay with existing wired/wireless infrastructure without disruption
Load balancing and WAN failover enhance bandwidth utilization and provide more reliable Internet connection
Powerful Network Security Capabilities for Enterprise Applications
Standards-based data encryption: WEP, WPA, WPA2, IEEE 802.1X, and IPSec VPN
Secure guest and administrator access using web-based login and administration over SSL
Diverse user authentication methods, including built-in Local and On-demand database; supports external authentication servers including POP3, LDAP, RADIUS, Windows Domain, and SIP registrar
Built-in DoS protection keeps malicious hackers from collapsing the network
Site-to-site VPN tunnels allow branch offices to securely connect with one another and share the same account database
Comprehensive Access Control and User Management
Role-based access control and policy enforcement offer management of privileges for different user groups
On-demand account generation provides secure and managed user accounts to visitors
Service Zone function partitions a physical network into up to 9 virtual networks, each with its own definable access control and group policy profiles. Allows hotspot owners to provide various levels of customized services
Individual user bandwidth limit enables flexible traffic control for different scenarios
Centralized Access Point (AP) Management
Centralized remote control and automatic AP discovery
Management and monitoring of managed APs via web-based administration interface, including AP's system settings, online status, enabling/disabling, reset, and firmware upgrade
Periodically monitors APs and notifies the administrator of problematic APs
Flexible Accounting and Easy Billing
Configurable billing profiles allow operators to customize billing plans for on-demand users
Support online payment with credit card through Authorize.net, PayPal and SecurePay
Support for Location-Based Hotspot Services and Customizable UAM Web Pages
The logical concept of Service Zone allows the Controller to differentiate clients by locations and to provide different user experiences (such as different login pages) and network policies
When coupling with VLAN switches and DSLAM devices, the Controller can use its Port Mapping feature to tell the location of each client and therefore provide differentiated services. For example, a hotel guest would not need to type in the password again every time when accessing the Internet in room
By setting up multiple Service Zones and utilizing customized pages or external pages, a single Controller can serve multiple hotspot franchises transparently to the clients
PMS Integration for Hotel Applications
By interfacing the 3rd party middleware – NetRetriever, the controller is able to post billing information to multiple kinds of hotel PMSs, including Micros Fidelio/Opera, HiRUM, RMS, CMS Hospitality, EzyRez, RoomMaster2000, Charts and etc
A hotel guest can obtain an Internet access account at check-in counter, or sign up for the Internet access service in room anytime without the help of clerks. With PMS integration, the guest will receive a single room bill
With a single account, a guest will be able to access the Internet by wire in room or by wireless connection anywhere within the service range of APs connecting to the Controller

Call for Price Now

WHG505 is capable of centrally managing 230 access points (150 x EAP700 + 80 x other 4ipnet single radio AP) to cover a wider service area in a smaller network.

WHG505 – Secure WLAN Controller
Simplified Deployment and Reliable Internet Connection
Gigabit Ethernet to meet higher data rate demands of larger networks
Easy to deploy, highly scalable platform allows overlay with existing wired/wireless infrastructure without disruption
Load balancing and WAN failover enhance bandwidth utilization and provide more reliable Internet connection
Powerful Network Security Capabilities for Enterprise Applications
Standards-based data encryption: WEP, WPA, WPA2, IEEE 802.1X, and IPSec VPN
Secure guest and administrator access using web-based login and administration over SSL
Diverse user authentication methods, including built-in Local and On-demand database; supports external authentication servers including POP3, LDAP, RADIUS, Windows Domain, and SIP registrar
Built-in DoS protection keeps malicious hackers from collapsing the network
Site-to-site VPN tunnels allow branch offices to securely connect with one another and share the same account database
Comprehensive Access Control and User Management
Role-based access control and policy enforcement offer management of privileges for different user groups
On-demand account generation provides secure and managed user accounts to visitors
Service Zone function partitions a physical network into up to 9 virtual networks, each with its own definable access control and group policy profiles. Allows hotspot owners to provide various levels of customized services
Individual user bandwidth limit enables flexible traffic control for different scenarios
Centralized Access Point (AP) Management
Centralized remote control and automatic AP discovery
Management and monitoring of managed APs via web-based administration interface, including AP's system settings, online status, enabling/disabling, reset, and firmware upgrade
Periodically monitors APs and notifies the administrator of problematic APs
Flexible Accounting and Easy Billing
Configurable billing profiles allow operators to customize billing plans for on-demand users
Support online payment with credit card through Authorize.net, PayPal and SecurePay
Support for Location-Based Hotspot Services and Customizable UAM Web Pages
The logical concept of Service Zone allows the Controller to differentiate clients by locations and to provide different user experiences (such as different login pages) and network policies
When coupling with VLAN switches and DSLAM devices, the Controller can use its Port Mapping feature to tell the location of each client and therefore provide differentiated services. For example, a hotel guest would not need to type in the password again every time when accessing the Internet in room
By setting up multiple Service Zones and utilizing customized pages or external pages, a single Controller can serve multiple hotspot franchises transparently to the clients
PMS Integration for Hotel Applications
By interfacing the 3rd party middleware – NetRetriever, the controller is able to post billing information to multiple kinds of hotel PMSs, including Micros Fidelio/Opera, HiRUM, RMS, CMS Hospitality, EzyRez, RoomMaster2000, Charts and etc
A hotel guest can obtain an Internet access account at check-in counter, or sign up for the Internet access service in room anytime without the help of clerks. With PMS integration, the guest will receive a single room bill
With a single account, a guest will be able to access the Internet by wire in room or by wireless connection anywhere within the service range of APs connecting to the Controller

Call for Price Now

Primary Function: Waterproof IP Security Camera with WIFI and Night Vision
Day and night vision with 48 IR LED's (night visibility up to 20 meters)
Multi-level users access and management with password protection.
Allows remote viewing video and record from any internet connection.
Wi-Fi compliant with IEEE 802.11b/g on 2.4 Ghz ISM frequency band.

Connector Type: N plug to NB/H jack
Impedenza: 50Ω
Frequency Range: DC ~ 6GHz
VSWR:
1.17 at 2.19GHz
1.24 at 5.61GHz
Insertion Loss: 0.62dB max
0.297dB at 2.48GHz
0.614dB at 5.89GHz
DC Breakdown Voltage: 90V ± 20%
Insulation Resistance: > 10,000MΩ
Impulse Breakdown Voltage: 10KV min (1.2/50μS waveform)
Maximum Withstand Current: 5KA min (8/20μS waveform)

• Frequency Range: 5.1Ghz – 5.9Ghz
• Antenna Gain: 8dBi
• Polarization: Vertical, Omni-Directional
• VSWR: < 1.5 : 1
• Maximum Input Power: 50 watts
• Vertical Beamwith: 17 degrees
• Horizontal Beamwidth: 360 degrees
• Impedance: 50 ohms
• Dimension: 375mm(L) x 17mm(D)
• Weight: 200g
• Connector Type: N-Type Male
• Housing Material Fiberglass
• Operating Temperature -40°C to +80°C

Caratteristiche:

1. Grid Parabolic Antenna
2. Working on 5.5~5.835GHz
3. High 27dbi gain to extend coverage
4. Provide pole mounting
5. H-Plane 8.5° / E-Plane 6.6°

Specifiche tecniche:

Frequency 5.5 ~ 5.835GHz
Type Grid
Polarization Vertical
Gain 27dBi
VSWR ≦2.0
Beam Width H-Plane 8.5° E-Plane 6.6°
Impedance 50Ω± 5Ω
Connector Type N Type (Female)

Environmental & Mechanical Characteristics

Temperature -30℃ ~ +60℃
Lightning Protection DC Ground
Radome ABS
Dimensions ∮150×600mm
Weight 2860g±50g (w/mount)

ANT-OD-242505M 2.4GHz – 2.5GHz 5dBi Mesh Omni-Directional Antenna
Frequency Range: 2.4GHz – 2.5GHz
Antenna Gain: 5dBi
Polarization: Vertical, Omni-Directional
VSWR: ≤ 1.5 : 1
Maximum Input Power: 50 watts
Vertical Beamwidth: 20 degrees
Horizontal Beamwidth: 360 degrees
Impedance: 50 ohms
Dimension: 330mm(L) x 17mm(D)
Weight: 85g
Connector Type: N-Type Male
Housing Material: Fiberglass
Operating Temperature: -40°C to +80°C

Caratteristiche:

1. Grid Parabolic Antenna
2. Working on 2400MHz
3. High 24dbi gain to extend coverage.
4. Pole mounting supplied.

Specificazione

Frequency 2400 ~ 2500MHz
Type Grid Parabolic
Polarization Linear, Horizontal / Vertical
Gain 24dBi
VSWR 2.0:1
Beam Width H-Plane 9° E-Plane 11°
Impedance 50Ω
Connector Type N-type(female)

Environmental & Mechanical Characteristics

Temperature -40 to 85℃
Lightning Protection DC Ground
Radome ABS, UV resistant
Dimensions 1000 x 600 mm
Weight 5 kg

By supporting 802.1p/802.1Q QoS and 802.11e WMM, EAP100 ensures the quality of communication for multimedia applications like voice, audio and video. The dual IEEE 802.3af PoE compliant design not only provides both data transfer and power supply through the same Ethernet cable but supports redundant connectivity with failover function.

Caratteristiche e Vantaggi

High Speed IEEE 802.11g and Backward Compatible with 802.11b

Equipped with a high-speed IEEE 802.11g wireless network interface based on Atheros™ chipset, transmission rates up to 54Mbps
WDS Repeater for Extending Wireless Coverage

Creates structural WDS (Bridge or Repeater) links connecting to other WDS-capable APs
Repeater links can serve as EAP100′s LAN connections to replace Ethernet ports, or simply bridge the wired side and the wireless side as a single network
Supporting QoS & 802.11e WMM

Supports IEEE 802.1p/IEEE 802.1Q Quality of Service (QoS) tagging features
Supports IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty multimedia applications like voice, audio and video
Business-class WLAN Security & Client Authentications

Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key)
Wireless LAN segmentation, Disable SSID Broadcast and the option of station-isolation
Ability to be configurable to filter out unauthorized wireless clients with build-in MAC-based access control list or via a back-end RADIUS server by sending an authentication request
Support business-class WLAN security, multiple-SSID, and VLAN tagging

Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key).
Support multiple ESSIDs and VLAN tagging.
MAC ACL list & RADIUS client support for filtering out unauthorized wireless clients.
Multiple Virtual APs & Capability of Client Isolation

One EAP100 can emulate up to 8 Virtual APs (VAP), each with its own ESSID; namely, one AP can have 8 ESSIDs
Each VAP appears to clients as an independent AP and its traffic and be associated with a VLAN ID
Supports client isolation, isolated from each other under one AP
Wall mountable Dust-proof Metal Housing

Enclosed in a metal housing, durable and non-fire hazard for the industrial environment
Dual-PoE with Link Failover

The IEEE 802.3af Power over Ethernet (PoE) compliant design eliminates the need for power sockets, allows installation of this device in areas where power outlets are not readily available to improve deployment flexibility, and provides standard based compatibility with other device
Provides dual-PoE 10/100 Fast Ethernet ports with failover function for redundant connectivity

EAP300 comes with all standards demanded by enterprise applications, including business-grade security (802.1X, WPA and WPA2), and multiple ESSIDs with VLAN tags to separate the traffics of different departments. Beyond common expectations, EAP300's real surprise is the patent-pending WES (Press-n-Connect) technology. Bridging multiple EAP300s is at the touch of a button with 4ipWES, which enables a quick and automatic WDS Easy Setup by pressing the WES button on EAP300. Extending wireless network coverage is a breeze. Supporting up to 300Mbps wireless speed with its 802.11n 3×3 MIMO solution, and a gigabit Ethernet interface, EAP300 is perfect for bandwidth-hungry applications such as video surveillance, multi-media streaming over wireless. The QoS – WMM ensures the quality of voice/video when multiple applications are transmitting media and data over the air simultaneously. EAP300′s higher throughput, security and durability make it a perfect choice of wireless connectivity for your business.

Caratteristiche e Vantaggi

Dual-band 3 x 3 MIMO Field Replaceable Antenna & Backward Compatible with 802.11a/b/g

The antenna diversity design enhances the connection reliability to improve data transmission capability
Three detachable high-gain antennas for optimal wireless coverage and field replaceable to meet customer demands for specific environment
Equipped with a high-speed IEEE 802.11n/a/b/g wireless network interface, transmission rates up to 300Mbps
WDS/Repeater for Extending Wireless Coverage

Creates structural WDS (Bridge or Repeater) links connecting to other WDS-capable APs
Repeater links can serve as EAP300′s LAN connections to replace Ethernet ports, or simply bridge the wired side and the wireless side as a single network
Supporting QoS & 802.11e WMM

Supports IEEE 802.1p/IEEE 802.1Q Quality of Service (QoS) tagging features
Supports IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty multimedia applications like voice, audio and video
Business-class WLAN Security & Client Authentications

Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key)
Wireless LAN segmentation, Disable SSID Broadcast and the option of station-isolation
4ipWES (Press-n-Connect) with push button enables quick/auto WDS link
Ability to be configurable to filter out unauthorized wireless clients with build-in MAC-based access control list or via a back-end RADIUS server by sending an authentication request
Multiple Virtual APs & Capability of Client Isolation

One EAP300 can emulate up to 8 Virtual APs (VAP), each with its own ESSID; namely, one AP can have 8 ESSIDs
Each VAP appears to clients as an independent AP and its traffic and be associated with a VLAN ID
Supports client isolation, isolated from each other under one AP
Wall mountable Dust-proof Metal Housing

Enclosed in a metal housing, durable and non-fire hazard for the industrial environment
Gigabit Ethernet port with PoE

The IEEE 802.3af Power over Ethernet (PoE) compliant design eliminates the need for power sockets, allows installation of this device in areas where power outlets are not readily available to improve deployment flexibility, and provides standard based compatibility with other device
Provides 10/100/1000 Gigabit Ethernet port, matching the wire and wireless throughput.

It has the interfaces to serve both wireless and wired LAN access. The simplistic yet chic design of EAP700 allows it to blend into a working or a living environment practically and elegantly. By utilizing PoE, EAP700 comes with an advantage of running fewer cables in the duct. The Power over Ethernet (PoE) LAN port on the EAP700 serves as the power feed as well as the wired network feed. Optionally, it can also be powered via an AC adapter when PoE switch is not available.

Standalone, EAP700 is an easy-to-install and cost-effective solution for most of indoor wireless deployments, including hotel rooms, apartments, offices, classrooms, libraries, private homes, public kiosks, etc. When working under one of 4ipnet Controllers, the combined network turns into an intelligent building solution, a managed internet service, or a Wi-Fi hotspot network of various scales. Multi-pack is available at lower cost to contractors/builders for larger deployments.

Caratteristiche e Vantaggi

Hidden in-the-wall behind faceplate, blending well into most of interior/architectural designs

Clean and stylish look. The main unit fits in a standard size outlet box, hidden behind the wall-jack faceplate.
The faceplate is a two-piece design, slide-able for adjusting the depth of the portion that goes in-the-wall, and for covering the mistakes around the cut-out hole.
Easy to install, fewer cables to run, flexible power feed options, meeting building codes

The IEEE 802.3af Power over Ethernet (PoE) eliminates the need for power sockets, allowing installation of this device in areas where power outlets are not readily available to improve deployment flexibility.
Using a single CAT5e cable feed both power and Ethernet data. Optional AC power feed is available.
High speed interface and QoS/WMM support,ideal for voice, video, and data applications

Equipped with a powerful, high-speed IEEE 802.11b/g wireless interface and hidden 2.4GHz antenna.
With the additional QoS/WMM support, EAP700 is ideal for converged voice, video, and data applications.
Connections for both wireless and wired clients

Keep the style of a simple LAN wall jack while being able to serve both LAN and WLAN devices.
Support business-class WLAN security, multiple-SSID, and VLAN tagging

Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key).
Support multiple ESSIDs and VLAN tagging.
MAC ACL list & RADIUS client support for filtering out unauthorized wireless clients.
Flexible deployment – standalone, or managed in an intelligent building solution

Stand-alone, EAP700 is a full AP (without router), normally chained from a modem router to service clients.
WDS links can be established to bridge other APs for extending WLAN coverage.
Supports client isolation, important in a hotspot or hospitality environment.
When managed under a 4ipnet Controller, such as the WHG-series, the combination has been pre-integrated to provide solutions for many applications.

EAP200 makes the wireless communication fast, secure and easy. It supports business grade security such as 802.1X, and Wi-Fi Protected Access (WPA and WPA2). By pushing a purposely built button, 4ipWES (Press-n-Connect) feature makes it easy to bridge wireless links of multiple EAP200s for forming wider wireless network coverage. EAP200 also features multiple ESSIDs with VLAN tags; one EAP200 can emulate up to eight Virtual APs, great for enterprise applications, such as separating the traffics of different departments using different ESSIDs.

Supporting up to 300Mbps wireless speed with its 802.11n 2 x 2 MIMO solutions, EAP200 is perfect for bandwidth-hungry applications such as video surveillance, multimedia streaming over the wireless links. Its QoS – WMM feature ensures the quality of voice/ video when multiple applications are transmitting media and data over the air at the same time.

EAP200's higher throughput, security and durability make it a perfect choice of wireless connectivity for your applications.

2.4GHz 2 x 2 MIMO Field Replaceable Antenna & Backward Compatible with 802.11n/b/g
The antenna diversity design enhances the connection reliability to improve data transmission capability
Two detachable antennas for optimal wireless coverage and field replacement flexibility
Equipped with a high-speed IEEE 802.11n/b/g wireless network interface, transmission rates up to 300Mbps
WDS/Repeater for Extending Wireless Coverage
4ipWES (Press-n-Connect) with push button enables quick/auto WDS link
Creates structural WDS (Bridge or Repeater) links connecting to other WDS-capable APs
WDS links can serve as EAP200′s LAN connections to replace Ethernet ports, or simply bridge the wired side and the wireless side as a single network
Supporting QoS & 802.11e WMM
Supports IEEE 802.1p/IEEE 802.1Q Quality of Service (QoS) tagging features
Supports IEEE 802.11e Wireless Multi-Media to fulfill bandwidth thirsty triple-play (voice, audio and video) applications
Business-class WLAN Security & Client Authentications
Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key)
Wireless LAN segmentation, Disable SSID Broadcast and the option of station-isolation
Configuration-capable to filter out unauthorized wireless clients with build-in MAC-based access control list or via a back-end RADIUS server by sending an authentication request
Multiple Virtual APs & Capability of Client Isolation
One EAP200 can emulate up to 8 Virtual APs (VAP), each with its own ESSID; namely, one AP can have 8 ESSIDs.
Each VAP appears to clients as an independent AP and its traffic and be associated with a VLAN ID.
Supports client isolation, isolated from each other under one AP
Wall mountable Dust-proof Metal Housing
Enclosed in a metal housing, durable and non-fire hazard for the industrial environment
Dual-PoE with Link Failover
The IEEE 802.3af Power over Ethernet (PoE) compliant design eliminates the need for power sockets, allows installation of this device in areas where power outlets are not readily available to improve deployment flexibility, and provides standard based compatibility with other device
Provides dual-PoE 10/100 Fast Ethernet ports with failover function for redundant connectivity.

Technical specifications Peripheral type Wireless router
Standards 802.11b/g/n (Draft)
Transfer rate 300 Mbps
Frequency range 5 GHz
Routing protocols TCP/IP
Safety features IP access control list
SPI firewall
Filtraggio dei contenuti
IPS (Intrusion Prevention System)
Management features SNMP version 1, 2c
Antenna 3
Dimensions 198 x 131 x 198 mm
Weight 0.55 kg
Contents WRVS4400N router, CD-ROM with user manual and QuickVPN software, network cable, power adapter, set-up guide

Technical Specifications Norm IEEE 802.11b, IEEE 802.3af, IEEE 802.11g
Transfer Speed 108 Mbps
Encrypting WEP 64-Bit/128-Bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT
Antenna 2 detachable aerials
Ethernet Power over Ethernet
Size 170 x 205 x 195 mm
Weight 400g
Included Accessories 2 detachable aerials, CD-Rom, Ethernet cable, mains power supply, registration card.

General Device Type Radio access point
Width 17 cm
Depth 4.1 cm
Height 17 cm
Weight 390 g
Networking Form Factor External
Connectivity Technology Wireless
Data Transfer Rate 300 Mbps
Line Coding Format OFDM
Data Link Protocol IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft)
Spread Spectrum Method OFDM, DSSS
Network / Transport Protocol DHCP
Remote Management Protocol SNMP 1, SNMP 2c, HTTP, HTTPS
Frequency Band 2.4 GHz
Status Indicators Link activity, power, link OK
Features DHCP support, power over Ethernet (PoE), load balancing, VLAN support, Syslog support, E-mail alert, MAC address filtering, IPv6 support, firmware upgradable, MIMO technology, Wi-Fi Multimedia (WMM) support, event log, Quality of Service (QoS), RADIUS support, Wi-Fi Protected Setup (WPS)
Encryption Algorithm 128-bit WEP, 64-bit WEP, WPA, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise
Authentication Method Radio Service Set ID (SSID), Basic Service Set Identifier (BSSID)
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.1p, IEEE 802.11b, IEEE 802.3af, IEEE 802.11d, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11n (draft), Wi-Fi Protected Setup
Aerial Antenna External detachable
Antenna Qty 3
Directivity Omni-directional
Gain Level 2 dBi
Expansion / Connectivity Interfaces 1 x network / power – Ethernet 10Base-T/100Base-TX/1000Base-T – RJ-45
Miscellaneous Cables Included 1 x network cable
Compliant Standards CE, IC, FCC
Power Power Over Ethernet (PoE) Yes
Power Device Power adapter – external
Software / System Requirements OS Provided Linux
Environmental Parameters Min Operating Temperature 0 °C
Max Operating Temperature 40 °C
Humidity Range Operating 10 – 85%

General Device Type Wireless router
Form Factor External
Memory RAM 64 MB
Flash Memory 32 MB
Networking Connectivity Technology Wireless, wired
Integrated Switch 4-port switch
Data Link Protocol Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Switching Protocol Ethernet
Network / Transport Protocol TCP/IP, UDP/IP, L2TP, PPPoE
Routing Protocol RIP-1, RIP-2, IGMPv2, IGMP, static IP routing, IGMPv3, GRE
Remote Management Protocol SNMP 2, HTTP, HTTPS
Capacity IPSec VPN tunnels : 5
Status Indicators Port status, power
Features NAT support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), Syslog support, traffic shaping, Stateful Packet Inspection (SPI), DoS attack prevention, VPN passthrough, URL filtering, Low-latency queuing (LLQ), Weighted Fair Queuing (WFQ), Wi-Fi Multimedia (WMM) support, Access Control List (ACL) support, Quality of Service (QoS), Wi-Fi Protected Setup (WPS), DHCP server, wireless bridge mode
Compliant Standards IEEE 802.1Q, IEEE 802.11b, IEEE 802.11g, IEEE 802.11i, Wi-Fi CERTIFIED, IEEE 802.11n
IP Telephony VoIP Functionality VoIP phone adapter
VoIP Protocols SIP v2
Voice Codecs G.711, G.723.1, G.726
Telephony Interfaces 2 phone (FXS), 1 line (FXO)
IP Telephony Features Echo cancellation, comfort noise generation (CNG), voice activity detection (VAD), Caller ID, call waiting, call hold, call transfer, silence suppression, DTMF generation/detection
Aerial Aerial External integrated
Antenna Qty 1
Gain Level 2.2 dBi
Expansion / Connectivity Interfaces 4 x network – Ethernet 10Base-T/100Base-TX – RJ-45 ¦ 1 x network – Ethernet 10Base-T/100Base-TX – RJ-45 ( WAN ) ¦ 1 x phone line – FXO – RJ-11 ¦ 2 x phone line – FXS – RJ-11 ¦ 1 x Hi-Speed USB – 4 PIN USB Type A
Miscellaneous Cables (Details) 1 x network cable ¦ 1 x phone cable
Encryption Algorithm Triple DES, 128-bit WEP, 64-bit WEP, TKIP, WPA, WPA2
Authentication Method RADIUS, Radio Service Set ID (SSID)
Compliant Standards ETSI, CISPR 24, EN 61000-3-2, ICES-003, EN 61000-3-3, EN55024, CISPR 22, EN50082-1, AS/NZS 60950-1, RSS-210, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, FCC Part 15, CS-03, EN 61000-4-5, EN 61000-6-2, EN 61000-4-11, FCC CFR47 Part 15, EN300-386, EN 61000-4-8, UL 60950-1, IEC 60950-1, EN 60950-1
Power Power Device Power adapter – external
Tensione richiesta 120/230 V
Software / System Requirements Software Included Drivers & Utilities
Environmental Parameters Min Operating Temperature 0 °C
Max Operating Temperature 40 °C
Humidity Range Operating 5 – 95%

When operating in CPE (Client) mode, it functions as a Wi-Fi modem gateway to receive wireless signal over the last-mile Internet feed from WISPs. The CPE's bandwidth to the Internet can be assigned by the WISP. When in AP mode, OWL510 operates as an AP station with wall-penetrating high-power signal and long-range coverage to better serve Wi-Fi clients. In addition, it can be set up as a WDS-mesh node by establishing multiple WDS links to bridge neighbor access points together. Coming with business-class security, OWL510 in AP mode is also ideal for enterprise applications. Furthermore, one OWL510 with multiple SSIDs is capable of acting as multiple Virtual APs (VAPs). By tagging the traffic from each VAP with a unique VLAN ID, it allows for segmenting a corporate network using VLANs to protect critical resources. Being a versatile Wi-Fi device, OWL510 does not limit itself to outdoor usage only. When managed by a Controller (such as the WHG-series), it performs as a Wi-Fi base station in either a public or private wireless access deployment.

Caratteristiche e Vantaggi

Rugged, Compact-Sized, and Adaptive to Versatile Environments

Diversified deployments:
Municipal Wi-Fi service
Home Ower Association (HOA), RV parks, and recreation resorts
Hotels, mobile hospitals, and mobile libraries
Shopping malls, airports, harbors, roadways, warehouse, and manufacturing plants
IP68 weather- and water-proof
Housed in durable, rust-resistant metal casing
High Transmit Power and Built-in Patch Antenna

Up to 500mW output power from the board to transmit stronger signals for longer range
Built-in patch antenna for installation convenience and efficiency
LED indicators to display wireless signal strength
High-speed with QoS for Voice, Video, and Data Applications

Equipped with a high-speed IEEE 802.11g wireless network interface based on Atheros™ chipset, transmit rates up to 54Mbps
Backward compatible with 802.11b
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty triple-play (voice, video, and data) applications
Power over Ethernet (PoE) & Flexible Mounting Options

PoE feature reduces the need of additional power cable to the device; a quality Power Supply Equipment (PSE) is bundled in the package
Wall and pole mountable; mounting kit included
Multiple Operation Modes for Different Infrastructures

Two administrator accounts – one for WISP to manage wireless broadband subscribers
Multiple operation modes:
CPE Mode – wireless modem with IP sharing
AP Mode – pure AP
WDS Mode – AP with wireless bridge
Universal Repeater Mode – with MAC NAT
Business-class Security and Multiple-SSID/ VLAN tagging Support

Full range of enterprise-grade wireless security mechanisms such as WEP, WPA and WPA2 (802.11i)
Multiple-SSID capability enables one OWL510 to behave like up to 8 unique Virtual APs (VAPs), the equivalent of 8 wireless Virtual LANs (VLANs) to securely segment wireless network traffic
Support client isolation in public hotspot operation.

When operating in CPE (Client) mode, it functions as a Wi-Fi modem gateway to receive wireless signal over the last-mile Internet feed from WISPs. The CPE's bandwidth to the Internet can be assigned by the WISP. When in AP mode, OWL510 operates as an AP station with wall-penetrating high-power signal and long-range coverage to better serve Wi-Fi clients. In addition, it can be set up as a WDS-mesh node by establishing multiple WDS links to bridge neighbor access points together. Coming with business-class security, OWL510 in AP mode is also ideal for enterprise applications. Furthermore, one OWL510 with multiple SSIDs is capable of acting as multiple Virtual APs (VAPs). By tagging the traffic from each VAP with a unique VLAN ID, it allows for segmenting a corporate network using VLANs to protect critical resources. Being a versatile Wi-Fi device, OWL510 does not limit itself to outdoor usage only. When managed by a Controller (such as the WHG-series), it performs as a Wi-Fi base station in either a public or private wireless access deployment.

Caratteristiche e Vantaggi

Rugged, Compact-Sized, and Adaptive to Versatile Environments

Diversified deployments:
Municipal Wi-Fi service
Home Ower Association (HOA), RV parks, and recreation resorts
Hotels, mobile hospitals, and mobile libraries
Shopping malls, airports, harbors, roadways, warehouse, and manufacturing plants
IP68 weather- and water-proof
Housed in durable, rust-resistant metal casing
High Transmit Power and Built-in Patch Antenna

Up to 500mW output power from the board to transmit stronger signals for longer range
Built-in patch antenna for installation convenience and efficiency
LED indicators to display wireless signal strength
High-speed with QoS for Voice, Video, and Data Applications

Equipped with a high-speed IEEE 802.11g wireless network interface based on Atheros™ chipset, transmit rates up to 54Mbps
Backward compatible with 802.11b
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty triple-play (voice, video, and data) applications
Power over Ethernet (PoE) & Flexible Mounting Options

PoE feature reduces the need of additional power cable to the device; a quality Power Supply Equipment (PSE) is bundled in the package
Wall and pole mountable; mounting kit included
Multiple Operation Modes for Different Infrastructures

Two administrator accounts – one for WISP to manage wireless broadband subscribers
Multiple operation modes:
CPE Mode – wireless modem with IP sharing
AP Mode – pure AP
WDS Mode – AP with wireless bridge
Universal Repeater Mode – with MAC NAT
Business-class Security and Multiple-SSID/ VLAN tagging Support

Full range of enterprise-grade wireless security mechanisms such as WEP, WPA and WPA2 (802.11i)
Multiple-SSID capability enables one OWL510 to behave like up to 8 unique Virtual APs (VAPs), the equivalent of 8 wireless Virtual LANs (VLANs) to securely segment wireless network traffic
Support client isolation in public hotspot operation.

Its dual Power over Ethernet (PoE) ports provides redundant power feeds to increase power supply availability. Hardware Flexibility for Networking and Multi-Radio, External Antenna Connectors. Hardware wise, a single OWL800 is capable of hosting 2-4 multiple radio modules simultaneously. Each module can be used for serving wireless clients, building wireless bridges, or establishing wireless backhauls. For some countries that permit high-power transmission, higher power modules are optionally available. There are 4 N-type antenna connectors extended from the modules on the OWL800 board, which not only gives the flexibility in choosing antennas but greatly simplifies the antenna installation. Software Flexibility for Networking.

Multi-Mode, Multi-Link. AP, Bridge/Mesh Node, Gateway. To support diversified wireless network architectures, the OWL800 provides multiple operating modes, including Point-to-Point Bridge, Point-to-Multipoint Bridge, AP station and AP Gateway. Unlike most of common access points that rely on a single radio for different purposes at one time, the OWL800 with multiple radio modules receives and transmits over-the-air signals for each bridge link or AP station with one dedicated wireless radio to prevent degraded performance.

Caratteristiche e Vantaggi

Rugged for Outdoor or Harsh Environment

Weatherproof and watertight cast-metal housing with an IP68 rating
Surge immunity up to 15KV
Dual PoE for redundant power input and data link
Support multiple operation modes – Gateway mode, AP mode, and Relay mode
Multiple Radios and Antenna Connectors, Flexible for PtP, PtMP, or Mesh networks

Two built-in 802.11 a/b/g radio with two additional mini-PCI slots for expansion
High power radio modules are available options for countries where higher power transmitting is permitted
Low-loss N-type connectors allow for more flexible antenna choices for professionals
Antennas can be attached directly on the OWL800, or connected closely to OWL800, for reducing signal losses
Dual bands (2.4G and 5G) with more channels allow better channel planning to avoid interference
Each Radio module can be configured as AP or WDS independently. Up to four modules can be serving in one OWL800
Built-in AAA and User Management for Hotspot Operation

Support built-in Local accounts and On-demand accounts for user authentication
Support multiple external RADIUS servers for user authentication
Support UAM and IEEE802.1x access control functions
Built-in Hotspot access control and billing features
Robust and Reliable Wireless Link Construction

Dual PoE power input
Support 8 WDS links per 802.11a/b/g radio module
WDS discovery and link table for easy connect
Support VLAN tags over wireless inter-AP links (WDS) in addition to over the wireless links from clients to AP
Dynamic wireless link backup for network reliability
Dedicated WDS radios could form a mesh WLAN without taking away some bandwidth for serving clients
Wireless Security and QoS Support

Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or Pre-Shared Key
Support encryption, including WEP, AES, or TKIP, over wireless inter-AP links (WDS)
Wireless LAN segmentation, Disable SSID Broadcast
Support client-isolation so that clients are isolated from each other under one AP
Support QoS tags over wireless inter-AP links (WDS)
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty multimedia applications such as voice, audio and video
Excellent Solution for Community WLAN

Each AP module is capable of emulating up to 8 virtual APs (VAPs) simultaneously
With the capabilities of multiple-SSID and VLAN tag association, OWL800 allows equipment-sharing among different franchises; moreover, its QoS feature enables differentiated service operations
Multiple OWL800′s can be managed under an external WLAN controller to form a managed WLAN solution.

OWL400 supports multiple operation modes (AP/Bridge/CPE) and works well as a last-mile solution for wireless ISPs (WISPs). When in AP mode , OWL400 operates as an AP station with wall-penetrating high-power signal and long-range coverage to better serve Wi-Fi clients. In addition, it can be set up as a WDS node by establishing multiple WDS links to bridge neighbor access points together.

Coming with business-class security, OWL400 in AP mode is also ideal for enterprise applications. Furthermore, one OWL400 with multiple SSIDs is capable of acting as multiple Virtual APs (VAPs). By tagging the traffic from each VAP with a unique VLAN ID, it allows for segmenting a corporate network using VLANs to protect critical resources.

When operating in CPE (Client) mode , it functions as a Wi-Fi modem gateway to receive wireless signal over the last-mile Internet feed from WISPs. The CPE's bandwidth to the Internet can be assigned by the WISP.

Being a versatile Wi-Fi device, OWL400 does not limit itself to outdoor usage only. When managed by a Controller (such as the WHG-series), it performs as a Wi-Fi base station in either a public or private wireless access deployment.

Rugged, Compact-Sized, and Adaptive to Versatile Environments
Diversified deployments:
Municipal Wi-Fi service
Home Owner Association (HOA), RV parks, and recreation resorts
Hotels, mobile hospitals, and mobile libraries
Shopping malls, airports, harbors, roadways, warehouse, and manufacturing plants
IP68 weather- and water-proof, housed in durable, rust-resistant metal casing
High Transmit Power and N-type Connector
Up to 200mW output power from the board to transmit stronger signals for longer range
N-type connector allows for choosing suitable antenna types and gains with flexibility
High-speed with QoS for Voice, Video, and Data Applications
Equipped with a high-speed IEEE 802.11n/a chipset, supporting transmit rate up to 300Mbps
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty triple-play (voice, video, and data) applications
Power over Ethernet (PoE) & Flexible Mounting Options
PoE feature reduces the need of additional power cable to the device; a quality Power Supply Equipment (PSE) is bundled in the package
Wall and pole mountable; mounting kit included
Multiple Operation Modes for Different Infrastructures
Two administrator accounts – one for WISP to manage wireless broadband one for subscribers
Multiple operation modes:
AP Mode – pure AP
WDS Mode – AP with wireless bridge
Universal Repeater Mode – with MAC NAT
CPE Mode – wireless modem with IP sharing
Business-class Security and Multiple-SSID/ VLAN tagging Support
Full range of enterprise-grade wireless security mechanisms such as WEP, WPA and WPA2 (802.11i)
Multiple-SSID capability enables one OWL400 to behave like up to 7 unique APs, the equivalent of 7 wireless Virtual LANs (VLANs) to securely segment wireless network traffic
Support client isolation in public hotspot operation

The IP68-rated metal sealed CPE100 is compact in size and weatherproof. Coming with a mounting kit, it can be mounted on a pole or wall. It is suitable for both indoor and outdoor usage with its 200mW output power.

The CPE 100 can be deployed in various environments, for example:

• Outdoor access point for school campuses, enterprise campuses, or manufacture plants.
• Wireless CPE for MDU/ MTU, such as apartments, dormitories, and office complexes.
• Indoor access point for hotels, factories, or warehouses where metal industrial grade devices are preferred.
• Public hotspot operation for café, parks, convention centers, shopping malls, or airports.
• Wireless coverage for both indoor and outdoor ground for private resorts, acre estate/home's yards, or golf course communities.

A WISP Deployment Example

Acts as a “Wireless Modem” to bring wireless bandwidth to home and office buildings.
Wireless Bandwidth Allocation (uplink/downlink) delivered to each building depending on different subscription plans.
Full range of wireless security mechanisms such as WEP, WPA and WPA2 (802.11i) that are important for enterprise wireless deployments.
Acts as a Home Router for IP Sharing and firewall, all-in-one installation solution.
Weatherproof and watertight from its rugged aluminum housing (IP68 Approved).
Power over Ethernet (PoE) built-in for single cable installation.
On board Ethernet surge protection.
Multi-mode Support:
CPE Mode
Modalità AP
WDS Mode
Universal Repeater (Bridge) Mode

The IP68-rated metal sealed CPE110 is compact in size and weatherproof. Coming with a mounting kit, it can be mounted on a pole or wall. It is suitable for both indoor and outdoor usage with its 200mW output power.

The CPE 100 can be deployed in various environments, for example:

• Outdoor access point for school campuses, enterprise campuses, or manufacture plants.
• Wireless CPE for MDU/ MTU, such as apartments, dormitories, and office complexes.
• Indoor access point for hotels, factories, or warehouses where metal industrial grade devices are preferred.
• Public hotspot operation for café, parks, convention centers, shopping malls, or airports.
• Wireless coverage for both indoor and outdoor ground for private resorts, acre estate/home's yards, or golf course communities.

A WISP Deployment Example

Acts as a “Wireless Modem” to bring wireless bandwidth to home and office buildings.
Wireless Bandwidth Allocation (uplink/downlink) delivered to each building depending on different subscription plans.
Full range of wireless security mechanisms such as WEP, WPA and WPA2 (802.11i) that are important for enterprise wireless deployments.
Acts as a Home Router for IP Sharing and firewall, all-in-one installation solution.
Weatherproof and watertight from its rugged aluminum housing (IP68 Approved).
Power over Ethernet (PoE) built-in for single cable installation.
On board Ethernet surge protection.
Multi-mode Support:
CPE Mode
Modalità AP
WDS Mode
Universal Repeater (Bridge) Mode

> Free to View HD Digital TV

> 780p /1080i Resolutions

> Digital Radio and Data Channels

> Automatic Channel Search

> HDMI Output

> Single Scart Socket

> Connects to existing aerial system and TV

Description: Outdoor antenna

Frequency range: Digital terrestrial TV

Coverage: 24 dB

Dimensioni
Height: 75 cm
Width: 54 cm
Depth: 128.2 cm

Weight With packaging: 3 kg

Content Mounting kit, connectors and coaxial cable