시스코 RV042 듀얼 WAN VPN 중소 기업 라우터 + 4 포트 스위치
시스코 RV042 VPN 라우터는 소규모 기업을위한 이상적인 연결 공유 네트워크 솔루션입니다.
특색 내장 스위치, 시스코에 의해 RV042 중소 기업 직접 사 컴퓨터에 연결할 수도 있고, 여러분이 필요로 큰 네트워크로 만드는 더 많은 허브와 스위치를 연결할 수 있습니다.
두 전용 WAN 포트 잔액로드 및 인터넷 연결. 한편, 시스코 RV042에 대한 VPN (가상 사설망) 기능을 50 원격 사무실 또는 사용자가 안전하게 오프 사이트에서 네트워크에 접속할 여행까지 가능합니다. 강력한 stateful 패킷 검사 (SPI)와 고급 방화벽도 있어요.
상세 정보 | 일반 | 장치 유형 | 라우터 |
|---|---|---|
| 폼 팩터 | 외부 | |
| 폭 | 13cm | |
| 깊이 | 20cm | |
| 고도 | 3.9 cm | |
| 무게 | 0.6 kg | |
| Localisation | 유럽 | |
| 네트워킹 | 연결 기술 | 유선 |
| 통합 스위치 | 4 - 포트 스위치 | |
| 데이터 전송 속도 | 100Mbps의 | |
| 데이터 링크 프로토콜 | 이더넷, 패스트 이더넷 | |
| 프로토콜 전환 | 이더넷 | |
| 네트워크 / 전송 프로토콜 | TCP / IP, IPSec을 | |
| 원격 관리 프로토콜 | SNMP 1, 텔넷, SNMP 2C, HTTP | |
| 통신 모드 | 반이중, 전이중 | |
| 상태 표시기 | 포트 상태, 시스템 | |
| 특징 | 관리 방화벽 보호, 스위칭, DMZ 포트, DHCP 지원, NAT 지원, VPN 지원,로드 밸런싱, 자동 업링크 (자동 MDI / MDI-X), Stateful 패킷 검사 (SPI), DOS 공격 방지, 동적 DNS 서버, | |
| 준수 기준 | IEEE 802.3, IEEE 802.3u | |
| 확장 / 연결 | 인터페이스 | 4 X 네트워크 노드 - 이더넷 10Base-T/100Base-TX - RJ-45 | 1 X 네트워크 - 이더넷 10Base-T/100Base-TX - RJ-45 (WAN) | 1 X 네트워크 - 이더넷 10Base-T/100Base-TX - RJ-45 (비무장 지대) |
| 여러 가지 잡다한 | 케이블 (세부 사항) | 1 X 네트워크 케이블 - 1.83 m |
| 암호화 알고리즘 | DES, 트리플 DES, MD5, SHA-1 | |
| 준수 기준 | FCC 클래스 B 인증, CE, UPnP를 | |
| 권력 | 전원 장치 | 전원 어댑터 - 외부 |
| 전압 필수 | AC 230분의 120 V | |
| 제조 업체 보증 | 서비스 및 지원 | 삼년 보증 |
| 서비스 및 지원 세부 사항 | 제한 보증 - 3 년간 | |
| 환경 매개 변수 | 최저 작동 온도 | 0 ° C |
| 최대 작동 온도 | 40 ° C | |
| 습도 범위 운영 | 10-85% |
Cisco SLM2008 8-Port Gigabit Small Business Switch
Perfect for small businesses, the Cisco SLM2008 switch boasts 8 Gigabit Ethernet ports for moving large files and using bandwidth-intensive applications.
Power is obtained from an external power socket or through PoE technology. Plus, the SLM2008 Small Business offers plenty of security features to protect your network from attacks.
More Details | 일반 | Device Type | 스위치 |
|---|---|---|
| Enclosure Type | 외부 | |
| Width | 13 cm | |
| Depth | 13 cm | |
| 고도 | 2.9 cm | |
| 무게 | 420 g | |
| Localisation | 유럽 | |
| 네트워킹 | Ports Qty | 8 x Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T |
| Data Transfer Rate | 1 Gbps | |
| Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet | |
| Remote Management Protocol | HTTP | |
| Connectivity Technology | Wired | |
| Communication Mode | Half-duplex, full-duplex | |
| Switching Protocol | 이더넷 | |
| MAC Address Table Size | 8K entries | |
| Status Indicators | Link activity, link OK, status | |
| 특징 | Layer 2 switching, auto-sensing per device, DHCP support, power over Ethernet (PoE), auto-negotiation, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, port mirroring, Weighted Round Robin (WRR) queuing, store and forward, Broadcast Storm Control, IPv6 support, firmware upgradable, Quality of Service (QoS) | |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1x | |
| Expansion / Connectivity | Interfaces | 7 x network – Ethernet 10Base-T/100Base-TX/1000Base-T – RJ-45 female ¦ 1 x network / power – Ethernet 10Base-T/100Base-TX/1000Base-T – RJ-45 female |
| 여러 가지 잡다한 | Encryption Algorithm | MD5 |
| Authentication Method | RADIUS | |
| Compliant Standards | CE, FCC Class A certified, UL, cUL, CB, FCC Part 15 | |
| 권력 | Power Device | Power adapter – external |
| Power Over Ethernet (PoE) | 예 | |
| Software / System Requirements | OS Required | Microsoft Windows XP or later |
| Manufacturer Warranty | Service & Support | 5 years warranty |
| Service & Support Details | Limited warranty – 5 years | |
| Environmental Parameters | Min Operating Temperature | 0 °C |
| Max Operating Temperature | 40 °C | |
| Humidity Range Operating | 10 – 90% |
Cisco RVS4000 VPN Small Business Router + 4-Port Switch
The Cisco RVS4000 VPN router is the ideal connection-sharing network solution for small businesses.
The four Gigabit Ethernet WAN ports speed up data transfers. Meanwhile, the VPN (Virtual Private Network) capability on the Cisco RVS4000 allows travelling users to securely connect to your network from offsite. There's even an advanced firewall with powerful stateful packet inspection (SPI).
More Details | 일반 | Device Type | Router |
|---|---|---|
| Form Factor | 외부 | |
| Width | 17 cm | |
| Depth | 17 cm | |
| 고도 | 4.1 cm | |
| 무게 | 380 g | |
| Localisation | 유럽 | |
| 네트워킹 | Connectivity Technology | Wired |
| Integrated Switch | 4-port switch | |
| Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet | |
| Switching Protocol | 이더넷 | |
| Network / Transport Protocol | PPTP, L2TP, IPSec | |
| Routing Protocol | RIP-1, RIP-2, static IP routing | |
| Remote Management Protocol | SNMP 1, SNMP 2c, HTTP, HTTPS | |
| 공연 | Firewall throughput : 800 Mbps | |
| Capacity | VPN tunnels (remote access) : 5 | |
| Status Indicators | Port status, power, status | |
| 특징 | Firewall protection, auto-sensing per device, dynamic IP address assignment , DHCP support, NAT support, VPN support, PAT support, auto-negotiation, auto-uplink (auto MDI/MDI-X), Syslog support, Stateful Packet Inspection (SPI), DoS attack prevention, content filtering, dynamic DNS server, Intrusion Detection System (IDS), E-mail alert, VPN passthrough, Intrusion Prevention System (IPS), URL filtering, firmware upgradable, Quality of Service (QoS), DHCP server | |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1x | |
| Expansion / Connectivity | Interfaces | 4 x network – Ethernet 10Base-T/100Base-TX/1000Base-T – RJ-45 ¦ 1 x network – Ethernet 10Base-T/100Base-TX/1000Base-T – RJ-45 ( WAN ) |
| 여러 가지 잡다한 | Cables (Details) | 1 x network cable |
| Encryption Algorithm | Triple DES, MD5, SHA-1, PEAP | |
| Authentication Method | RADIUS | |
| Works with Windows Vista | Works with Windows Vista | |
| Compliant Standards | FCC Class B certified, CE, ICES-003 | |
| 권력 | Power Device | Power adapter – external |
| Software / System Requirements | OS Provided | 리눅스 |
| Software Included | Drivers & Utilities | |
| Manufacturer Warranty | Service & Support | 1 year warranty |
| Service & Support Details | Limited warranty – 1 year ¦ Intrusion definitions update – 1 year | |
| Environmental Parameters | Min Operating Temperature | 0 °C |
| Max Operating Temperature | 40 °C | |
| Humidity Range Operating | 10 – 85% |
Cisco SF 302-08P 8-Port 10/100 MBPS Webview/POE Switch (SRW208P-K9-EU)
The SF 302-08P is the ideal solution for anyone looking to create a local network in their office. The SF 302-08P comes with 8 ports and Webview technology, allowing it to automatically fix settings via your usual internet browser and decide how much bandwidth to allocate to each computer.
More Details | Compatible systems | Standards: 802.3i 10BASE-T Ethernet 802.3u 100BASE-TX Fast Ethernet 802.3ab1000BASE-T Gigabit Ethernet 802.3z Gigabit Ethernet 802.3x flow control 802.3 ad LACP,802.3af PoE, 802.1D STP, 802.1Q/p VLAN, 802.1w Rapid STP 802.1s Multiple STP, 802.1X access authentication port |
| Interface | 8 RJ-45 connectors for 10BASE-T and 100BASE-TX, 2 RJ-45 connectors for 10BASE-T/100BASE-TX/1000BASE-T with 2 SFP slots |
| 공연 | 5.6 Gbps, non-limited |
| Indicator lights | 예 |
| Dimensions | 279 x 45 x 170 mm |
| 무게 | 1.2 kg |
| 컨텐츠 | SRW208P, power supply, 2 rack kits, CD, registration card |
Cisco RV082 Dual WAN VPN Small Business Router + 8-Port Switch
The Cisco RV082 VPN router is the ideal connection-sharing network solution for small businesses.
Featuring a built-in switch, the RV082 Small Business by Cisco can connect to eight computers directly, or you can connect more hubs and switches to create as big a network as you need.
The two dedicated WAN ports balance loads and internet connectivity. Meanwhile, the VPN (Virtual Private Network) capability on the Cisco RV082 allows up to 100 remote offices or travelling users to securely connect to your network from offsite. There's even an advanced firewall with powerful stateful packet inspection (SPI).
More Details | 일반 | Device Type | Router |
|---|---|---|
| Form Factor | External – 1U | |
| Width | 27.9 cm | |
| Depth | 24.1 cm | |
| 고도 | 4.4 cm | |
| 무게 | 1.5 kg | |
| Localisation | 유럽 | |
| 네트워킹 | Connectivity Technology | Wired |
| Integrated Switch | 8-port switch | |
| Data Transfer Rate | 100 Mbps | |
| Data Link Protocol | Ethernet, Fast Ethernet | |
| Switching Protocol | 이더넷 | |
| Network / Transport Protocol | IPSec | |
| Routing Protocol | RIP-1, RIP-2, static IP routing | |
| Remote Management Protocol | SNMP, Telnet, HTTP | |
| Communication Mode | Half-duplex, full-duplex | |
| Capacity | IPSec VPN tunnels : 100 | |
| Status Indicators | Port status, link activity, power, link OK | |
| 특징 | Firewall protection, auto-sensing per device, auto-negotiation, load balancing, auto-uplink (auto MDI/MDI-X), Stateful Packet Inspection (SPI), IP address filtering | |
| Compliant Standards | IEEE 802.3, IEEE 802.3u | |
| Expansion / Connectivity | Interfaces | 1 x network – Ethernet 10Base-T/100Base-TX – RJ-45 ( WAN ) ¦ 8 x network – Ethernet 10Base-T/100Base-TX – RJ-45 ¦ 1 x network – Ethernet 10Base-T/100Base-TX – RJ-45 ( WAN / DMZ ) |
| 여러 가지 잡다한 | Rack Mounting Kit | Included |
| Encryption Algorithm | DES, Triple DES, SHA, MD5 | |
| Compliant Standards | FCC Class B certified, CE | |
| 권력 | Power Device | Power supply – internal |
| Voltage Required | AC 120/230 V ( 50/60 Hz ) | |
| Environmental Parameters | Min Operating Temperature | 0 °C |
| Max Operating Temperature | 40 °C | |
| Humidity Range Operating | 10 – 85% |
Super High Capacity Wireless Backhaul, Up to 50Km Distance, 40Mbps Throughput (5GHz, N-type connector)
Super High Throughput TDMA Wireless Backhaul are adopting Wireless TDMA concept to provide an affordable and reliable rural connectivity. High-performance outdoor-deployable wireless bridge that provides wireless connectivity between multiple network locations. With the high throughput and long-distance transmission, it is the appropriate Wireless backhaul solution for Carriers, Service Providers and Enterprises.
More Details 
특징
1.Actual reachable testing range up to 50 km
2.High throughput up to 40Mbps
3.Support Bridge (PTP, PTMP)
4.High security (AES)
5.Ease of Installation (Real time Link Test for Local and Remote RSSI)
6.Transmit Power Control
7.Bandwidth Control (40 / 20 / 10 / 5 MHz)
8.Wireless TDMA (TDD Mode)
9.VLAN Pass-through Support
10.IP67 Rated Waterproof Metal Outdoor Enclosure with Vent Design
사양
무선
Standard Proprietary
Frequency Band 5120~6060MHz
Modulation 64QAM 3/4, 64QAM 2/3, 16QAM 3/4, 16QAM 1/2, QPSK 3/4, QPSK 1/2, BPSK 3/4, BPSK 1/2
Data Rate Up to 40Mbps within 50Km
Channel Bandwidth 5 / 10 / 20 MHz
Security WEP / AES Encryption
Sensitivity -92 dBm
Output Power 23dBm
Transmit Power Control 5 levels
Operating Mode Bridge (PTP, PTMP)
Software Features DFS
Link Test Tool (Real Time Local and Remote RSSI)
Spanning Tree (STP)
802.1Q VLAN pass through
NTP Client
관리
Web-Based management
Remote firmware upgradeable
Support SNMP V2 (Private MIB, 802.11 MIB)
CLI
Backup / Restore
System Log
Remote Log Server
Hardware Watch Dog
하드웨어
Processor Intel IXP422 266MHz Atheros2414
Flash 16MB SDRAM 32MB
LED Indication Power, Ethernet ,Wireless, RSSI (5 LEDs)
Antenna Connector 1 x Ntype connector
이더넷
10/100BASE-TX auto-negotiation Ethernet port x 1 (RJ-45 connector)
Auto MDI/MDI-X enabled, IEEE802.3af Power Over Ethernet Compatible
환경
Operating Temperature: -30 °C ~ 80 °C
Storage Temperature: -30 °C ~ 85 °C
Humidity: 100%(non condensing)
Power Supply 802.3af PoE, 48V 0.35A
Waterproof
IP67 Certificated
Mounting Wall Mount, Pole Mount, Optional Pole Mount for Light Pole
Dimensions 259 (L) x 250 (W) x 75 (H) mm
Super High Capacity Wireless Backhaul, Up to 50Km Distance, 40Mbps Throughput (2.4GHz, N-type connector)
Super High Throughput TDMA Wireless Backhaul are adopting Wireless TDMA concept to provide an affordable and reliable rural connectivity. High-performance outdoor-deployable wireless bridge that provides wireless connectivity between multiple network locations. With the high throughput and long-distance transmission, it is the appropriate Wireless backhaul solution for Carriers, Service Providers and Enterprises.
More Details
특징
1.Actual reachable testing range up to 50 km
2.High throughput up to 40Mbps
3.Support Bridge (PTP, PTMP)
4.High security (AES)
5.Ease of Installation (Real time Link Test for Local and Remote RSSI)
6.Transmit Power Control
7.Bandwidth Control (5 / 10 / 20 MHz)
8.Wireless TDMA (TDD Mode)
9.VLAN Pass-through Support
10.IP67 Rated Waterproof Metal Outdoor Enclosure with Vent Design
사양
무선
Standard Proprietary
Frequency Band 2412-2472MHz
Modulation 64QAM 3/4, 64QAM 2/3, 16QAM 3/4, 16QAM 1/2, QPSK 3/4, QPSK 1/2, BPSK 3/4, BPSK 1/2
Data Rate Up to 40Mbps within 50Km
Channel Bandwidth 5 / 10 / 20 MHz
Security WEP / AES Encryption
Sensitivity -92 dBm
Output Power 23dBm
Transmit Power Control 5 levels
Operating Mode Bridge (PTP, PTMP)
Software Features DFS
Link Test Tool (Real Time Local and Remote RSSI)
Spanning Tree (STP)
802.1Q VLAN pass through
NTP Client
관리
Web-Based management
Remote firmware upgradeable
Support SNMP V2 (Private MIB, 802.11 MIB)
CLI
Backup / Restore
System Log
Remote Log Server
Hardware Watch Dog
하드웨어
Processor Intel IXP422 266MHz Atheros2414
Flash 16MB SDRAM 32MB
LED Indication Power, Ethernet ,Wireless, RSSI (5 LEDs)
Antenna Connector 1 x Ntype connector
이더넷
10/100BASE-TX auto-negotiation Ethernet port x 1 (RJ-45 connector)
Auto MDI/MDI-X enabled, IEEE802.3af Power Over Ethernet Compatible
환경
Operating Temperature: -30 °C ~ 80 °C
Storage Temperature: -30 °C ~ 85 °C
Humidity: 100%(non condensing)
Power Supply 802.3af PoE, 48V 0.35A
Waterproof
IP67 Certificated
Mounting Wall Mount, Pole Mount, Optional Pole Mount for Light Pole
Dimensions 259 (L) x 250 (W) x 75 (H) mm
KC16T 16Wp 쿄세라 태양광 모듈
쿄세라의 고급 세포 처리 기술 및 자동 생산 설비 고효율 멀티 결정질 태양광 모듈을 생산하고 있습니다. 이러한 세포들은 안정된 유리 커버와 혹독한 환경 조건에서 효율적인 보호를 제공하기 위해 다시 시트와 pottant 사이에 캡슐화되어있다. 전체 라미네이트는 구조적 강도 및 설치의 용이성을 제공하는 알루 알루미늄 프레임에 설치됩니다.
상세 정보 전기적 사양
모델 KC16T
최대 전력 16W
공차 15% / -5 %
최대 전원 전압 17.4V
최대 전원 전류 0.93A
오픈 회로 전압 21.7V
단락 전류 1.00A
크기 517 x 280 X 17mm
질량 1.6kg
KC21T 21Wp 쿄세라 태양광 모듈
상세 정보 전기적 사양
모델 KC21T
최대 전력 21W
공차 15% / -5 %
최대 전원 전압 17.4V
최대 전원 전류 1.21A
오픈 회로 전압 21.7V
단락 전류 1.30A
치수 367 X 512 X 17mm
질량 2.0kg
KC32T 32Wp 쿄세라 태양광 모듈
KC32T 고효율 멀티 결정질 태양광 모듈
(JET 인증 모듈, IEC61215 표준)
쿄세라의 고급 세포 처리 기술 및 자동 생산 설비 고효율 멀티 결정질 태양광 모듈을 생산하고 있습니다. 이러한 세포들은 안정된 유리 커버와 혹독한 환경 조건에서 효율적인 보호를 제공하기 위해 다시 시트와 pottant 사이에 캡슐화되어있다.
상세 정보 효율성 % : 15
크기 (L X 폭 x H) (㎜) : 512 X 517 X 17
무게 (kg) : 2.8
맥스. 출력 전력 (와트) : 32
맥스. 전원 전압 (VmpV) : 17,4
맥스. 전원 전류 (꼬마 도깨비) : 1,84
오픈 회로 전압 (당신도 V) : 21,7
단락 전류 (ISC) : 1,99
KC50 50Wp 쿄세라 태양광 모듈
KC50T 고효율 멀티 결정질 태양광 모듈
(JET 인증 모듈, IEC61215 표준)
쿄세라의 고급 세포 처리 기술 및 자동 생산 설비 고효율 멀티 결정질 태양광 모듈을 생산하고 있습니다. 이러한 세포들은 안정된 유리 커버와 혹독한 환경 조건에서 효율적인 보호를 제공하기 위해 다시 시트와 pottant 사이에 캡슐화되어있다.
상세 정보 효율성 % : 15
크기 (L X 폭 x H) (㎜) : 652 X 639 X 54
무게 (㎏) : 5,0
맥스. 출력 전력 (와트) : 54
맥스. 전원 전압 (VmpV) : 17,4
맥스. 전원 전류 (꼬마 도깨비) : 3,11
오픈 회로 전압 (당신도 V) : 21,7
단락 전류 (ISC) : 3,31
KC65 65Wp 쿄세라 태양광 모듈
KC65 고효율 멀티 결정질 태양광 모듈
(JET 인증 모듈, IEC61215 표준)
쿄세라의 고급 세포 처리 기술 및 자동 생산 설비 고효율 멀티 결정질 태양광 모듈을 생산하고 있습니다. 이러한 세포들은 안정된 유리 커버와 혹독한 환경 조건에서 효율적인 보호를 제공하기 위해 다시 시트와 pottant 사이에 캡슐화되어있다.
상세 정보 전기적 성능
PV 모듈 타입 KC65GX-2P
1000에서 W / ㎡ (STC) *
최대 전력 [W] 65
최대 시스템 전압 [V] 750
최대 전원 전압 [V] 17.4
최대 전원 전류 [A] 3.75
오픈 회로 전압 (VOC) [V] 21.7
단락 회로 전류 (ISC) [] 3.99
치수 751 X 652 X 36mm
체중 6KG
KC85 - 85Wp 쿄세라 태양광 모듈
KC85 고효율 멀티 결정질 태양광 모듈
(JET 인증 모듈, IEC61215 표준)
쿄세라의 고급 세포 처리 기술 및 자동 생산 설비 고효율 멀티 결정질 태양광 모듈을 생산하고 있습니다. 이러한 세포들은 안정된 유리 커버와 혹독한 환경 조건에서 효율적인 보호를 제공하기 위해 다시 시트와 pottant 사이에 캡슐화되어있다.
상세 정보 전기적 성능
PV 모듈 타입 KC85
1000에서 W / ㎡ (STC) *
최대 전력 [W] 85
최대 시스템 전압 [V] 750
최대 전원 전압 [V] 17.4
최대 전원 전류 [A] 5.02
오픈 회로 전압 (VOC) [V] 21.7
단락 회로 전류 (ISC) [] 5.34
규격 1007 X 652 X 36mm
무게 8.3KG
KD135SX-1PU 135Wp 쿄세라 태양광 모듈
KD135 고효율 멀티 결정질 태양광 모듈
(JET 인증 모듈, IEC61215 표준)
쿄세라의 고급 세포 처리 기술 및 자동 생산 설비 고효율 멀티 결정질 태양광 모듈을 생산하고 있습니다. 이러한 세포들은 안정된 유리 커버와 혹독한 환경 조건에서 효율적인 보호를 제공하기 위해 다시 시트와 pottant 사이에 캡슐화되어있다.
상세 정보 전기적 성능
PV 모듈 타입 KC135
1000에서 W / ㎡ (STC) *
최대 전력 [W] 135
최대 시스템 전압 [V] 1,000
최대 전원 전압 [V] 23.6
최대 전원 전류 [A] 6.26
오픈 회로 전압 (VOC) [V] 26.5
단락 회로 전류 (ISC) [] 6.98
규격 1338 X 990 X 46mm
중량 16KG
KD210GH-2PU 210Wp Kyocera Solar Module
KD210 High Efficiency Multi Crystalline Photovoltaic Module
(JET certified module, IEC61215 standard)
Kyocera's advanced cell processing technology and automated production facilities produce a highly efficient multi crystalline photovoltaic module. These cells are encapsulated between a tempered glass cover and pottant with back sheet to provide efficient protection from the severest environmental conditions.
More Details ELECTRICAL PERFORMANCE
PV Module Type KD210
At 1000 W/m² (STC)*
Maximum Power [W] 210
Maximum System Voltage [V] 1000
Maximum Power Voltage [V] 26.6
Maximum Power Current [A] 7.9
Open Circuit Voltage (VOC ) [V] 33.2
Short Circuit Current (ISC) [A] 8.58
DIMENSIONS 1500 x 990 x 46mm
WEIGHT 18KG
KD70 70Wp Kyocera Solar Module
KD70 High Efficiency Multi Crystalline Photovoltaic Module
(JET certified module, IEC61215 standard)
Kyocera's advanced cell processing technology and automated production facilities produce a highly efficient multi crystalline photovoltaic module. These cells are encapsulated between a tempered glass cover and pottant with back sheet to provide efficient protection from the severest environmental conditions.
More Details ELECTRICAL PERFORMANCE
PV Module Type KD70
At 1000 W/m² (STC)*
Maximum Power [W] 70
Maximum System Voltage [V] 750
Maximum Power Voltage [V] 17.9
Maximum Power Current [A] 3.13
Open Circuit Voltage (VOC ) [V] 22.1
Short Circuit Current (ISC) [A] 4.3
DIMENSIONS 778 x 660 x 44mm
WEIGHT 6.5KG
KD95 95Wp Kyocera Solar Module
KD95 High Efficiency Multi Crystalline Photovoltaic Module
(JET certified module, IEC61215 standard)
Kyocera's advanced cell processing technology and automated production facilities produce a highly efficient multi crystalline photovoltaic module. These cells are encapsulated between a tempered glass cover and pottant with back sheet to provide efficient protection from the severest environmental conditions.
More Details ELECTRICAL PERFORMANCE
PV Module Type KD95
At 1000 W/m² (STC)*
Maximum Power [W] 95
Maximum System Voltage [V] 750
Maximum Power Voltage [V] 17.9
Maximum Power Current [A] 5.31
Open Circuit Voltage (VOC ) [V] 22.1
Short Circuit Current (ISC) [A] 5.81
DIMENSIONS 1043 x 660 x 44mm
WEIGHT 8.5KG
HSG1200 Wireless Hotspot Gateway
The HSG1200 Wireless Hotspot Gateway in 19″ rack-mountable chassis is designed to provide an easy-to-use, all-in-one solution for hotspot service providers. A single HSG1200 enables a hotspot provider to service multiple hot-spot franchises in a mall area through the feature of Multiple-Service-Zone. Each service zone can have its own login skin and an independent SSID.
More Details HSG1200 is also ideal for hospitality application. For example, a hotel can use the service zone feature to separate the privileges of staff, guest, and VIP usage for accessing Internet.
The HSG1200′s built-in on-demand account generation capability is easy to use by cashiers or receptionists. Each guest account is associated to a price and a usage quota, either by time or volume. Moreover, HSG1200 works with the existing RADIUS server, if central billing had been implemented by the operator.
Easy Installation and Operation
- Supports various broadband deployment options (T1, DSL, Cable) via static IP, DHCP, PPPoE, and PPTP
- Built-in user database provides sufficient account capacity for different operation scenarios
- Works with instant account generator to provide user accounts for visitor-based, on-demand operations
- Load balancing and WAN failover enhance bandwidth utilization and provide more reliable Internet connection
Integrated Security Features
- Standard-based data encryption and user authentication: SSL, IEEE 802.1X, WPA-RADIUS
- Secure guest and administrator access using web-based login and administration over SSL
- Configurable packet filtering policies enhance data traffic security
- Built-in DoS protection prevents malicious hackers from collapsing the network
Effective User Management
- Complete authentication mechanism blocks unauthenticated users from gaining access to the network
- 역할 기반 및 정책 기반 관리 정책은 악의적인 사용자에 대한 보호를 강화
- "온라인 사용자 목록"은 각 개별 사용자의 실시간 상태를 모니터링
- 주문형 사용자를위한 세션 만료 제어는 시간과 데이터 볼륨에 의해 허용
유연한 회계 및 결제
- 프로그래밍의 결제 프로필 운영자 주문형 사용자에 대한 과금 계획을 사용자 정의할 수 있습니다
- 대역폭 제어는 사용자의 서로 다른 수준의 서비스 클래스를 가능하게하고 이익을 극대화
- RADIUS 영상 분광 분석기 (벤더의 특정 속성) 구현은 RADIUS 서버를 사용하여 회계 및 세션 제어에 대한 유연성을 추가
- 분석 및 유지 기록에 대한 자세한 사용 자별 트래픽 내역 로그
- 결제 리포트는 주문형 사용자를 위해 거래 기록의 요약을 제공
네트워킹
- 지원 라우터, NAT 모드
- 고정 IP, DHCP, PPPoE를, PPTP 전화 접속 지원
- IP 플러그 앤 플레이 IP (PNP)을 지원
- 내장 DHCP 서버 및 DHCP 릴레이 지원
- 지원 NAT :
- IP / 포트 목적지 리디렉션
- DMZ 서버 매핑
- 가상 서버 매핑
- 구성 가능한 고정 경로
- 지정된 이메일 서버를 통해 이메일 서비스를 지원
- 담으로 둘러싸인 정원을 지원
- 벽으로 둘러싸인 정원 광고문의리스트는 로그인 포탈 페이지에 광고 웹사이트 링크를 가능하게
- 지원 MAC 주소는 통과
- HTTP 프록시를 지원
- 외부 터미널 서버에 이더넷 연결을 지원
- 보다 안정적인 인터넷 연결을위한 듀얼 업링크, 아웃 바운드로드 균형 조정 및 페일오버 지원
- 지원 SIP는 통과 NAT
보안
- SSL (Secure Socket Layer), IEEE 802.1x 및 WPA-RADIUS : 보안 표준 지원
- 지원 VPN은 통과 (IPSec을하고 PPTP)
- DoS 공격 보호 기능 내장
- 사이트 - 투 - 사이트 VPN 터널을 지원합니다
- MAC 액세스 제어 목록 지원
- 구성 가능한 사용자의 블랙리스트
- MAC 주소 및 사용자 신원 바인딩은 로컬 사용자 인증을 허용
서비스 영역
- 네트워크는 최대 9 서비스 영역, VLAN 태그에 의해 정의된 각으로 나누어져 있습니다
- 각 서비스 영역 자체가
- 포탈 페이지 로그인
- 인증 옵션
- LAN 인터페이스의 IP 주소
- DHCP 주소 범위
- 각 서비스 영역은 선택된 그룹에 대한 액세스를 허용
- 각 서비스 영역은 각 사용자 그룹에 네트워크 정책을 할당
사용자 관리
- 3000 로컬 계정 지원
- 2000 주문형 계정을 지원
- 여러 인증 방법에 대한 동시 지원 (로컬 및 주문형 계정, POP3, LDAP, RADIUS, NT 도메인)
- 정책 기반 액세스 제어 (방화벽 정책, 라우팅, 로그인 일정, 대역폭, 할당량, 그리고 세션을 기반으로 당 역할 할당)
- 사용자 세션 관리 :
- SSL 보호 로그인 포탈 페이지
- 하나의 계정으로 여러 개의 로그인을 지원합니다
- 세션 유휴 타이머
- 세션 및 계정 만료 제어
- 포탈 페이지를 로그인할 수있는 하이퍼 링크를 제공하는 알림 이메일
- 지원 윈도우 도메인에 대한 로그온 싱글
- 시간 프레임 컨트롤을 로그인
- 세션 제한
회계 및 결제
- 주문형 계정에 대한 결제 계획을 제공
- 시간 (시간) 및 데이터 볼륨 (MB)에서 주문형 계정에 대한 세션 만료 컨트롤을 활성화합니다
- 상세한 사용 자별 트래픽 역사는 지역과 주문형 두 계정 시간과 데이터 볼륨에 근거
- 관리자에게 자동으로 이메일 트래픽의 역사 보고서
- 트래픽 회계 및 세션 제어를 위해 RADIUS 영상 분광 분석기 (벤더의 특정 속성) 구현을 지원
- 외부 지불 게이트웨이 (Authorize.Net, 페이팔, SecurePay, WorldPay)를 통해 신용 카드 결제 지원
시스템 관리
- 웹 기반 관리 UI
- 사용자 정의 로그인 및 포털 페이지를 로그아웃
- SNMP V1, v2c 지원
- SSH 원격 관리
- 원격 펌웨어 업그레 이드
- NTP 시간 동기화
- 메뉴 기반의 콘솔 관리 인터페이스
- 시스템 구성을 백업 및 복원하는 유틸리티
모니터링 및보고
- 사용자의 온라인 상태 모니터링
- 장치의 IP 기반 모니터링
- WAN 연결 실패 알림
- 진단 및 문제 해결을위한 외부 로그 서버를 지원
- 사용자 트래픽 기록 로깅을 지원합니다
- 사용자 트래픽 세션을 지원 (TCP / UDP) 로깅
- 로컬 사용자 월간 사용량 보고서를 지원합니다
물리적 및 전원
- 전원 어댑터 : 100 ~ 240 VAC, 50 / 60 Hz에서
- 폼 팩터 : 19 "1U 랙 마운트
- 크기 (폭 x D x 높이) : 16.9 "X 6.1"X 1.7 "(430mm X 155mm X 43mm)
- 무게 : 3.3 파운드 (1.5 ㎏)
하드웨어 사양
- WAN 포트 : 2 X 10/100BASE-TX RJ-45
- LAN 포트 : 4 X 10/100BASE-TX RJ-45
- 콘솔 포트 : 1 X RS-232 DB9
- LED 표시기 : 1 X 파워, 1 X 상태, 2 X WAN, 4 X LAN
환경
- 작동 온도 : 0 ~ 40 ° C
- 저장 온도 : -20 ~ 65 ° C
인증
- CE, FCC
- RoHS 준수
패키지 내용물
- HS1200 × 1
- CD-ROM (사용자 설명서와 돼지) × 1
- 빠른 설치 안내서 (돼지) × 1
- 콘솔 케이블 × 1
- 이더넷 케이블 × 1
- 이더넷 케이블 × 1 스트레이트 스루
- 전원 코드와 전원 어댑터 (DC 12V) × 1
- 랙 장착 브래킷 (나사 포함) × 1
HSG3200 기가 핫스팟 게이트웨이
고성능 4ipnet HSG3200 기가 핫스팟 게이트웨이, 4 기가 비트 인터페이스가있는 19 "풀 랙 마운트 섀시에 오는 대형 무선 및 유선 인터넷 배포를 위해 설계되었습니다. 단일 HSG3200는 여러 서비스 - 개발구의 기능을 통해 쇼핑 영역의 여러 핫스팟 프랜차이즈 서비스를 제공하는 핫스팟 공급자 수 있습니다. 각 서비스 영역은 자체 로그인 스킨과 독립 SSID를 할 수 있습니다.
지금 가격으로 전화
상세 정보 HSG3200 또한 환대 어플 리케이션에 이상적입니다. 예를 들어,이 호텔은 인터넷에 액세스하는 직원들의 특권, 손님, VIP, 그리고 컨벤션 사용을 분리하는 서비스 영역 기능을 사용하실 수 있습니다.
HSG3200의 내장 주문형 계정 생성 기능은 출납 계원 또는 receptionists에 의해 사용이 편리합니다. 각 게스트 계정은 시간이나 볼륨으로하거나, 가격 및 할당량으로 연결됩니다. 중앙 청구는 운영자에 의해 구현 받았다면 더욱이 HSG3200은 기존 RADIUS 서버와 함께 작동합니다.
기능 및 이점
쉬운 설치 및 운영
고정 IP, DHCP, PPPoE를, 그리고 PPTP를 통해 다양한 광대역 배포 옵션을 (T1, DSL, 케이블) 지원
내장 사용자 데이터베이스는 다른 작업 시나리오에 대한 충분한 계정 용량을 제공
인스턴트 계정 생성기와 작품은 온디맨드 운영, 방문자 기반의 사용자 계정을 제공
부하 분산 및 WAN 페일오버는 대역폭 활용도를 향상시키고보다 안정적인 인터넷 연결을 제공
통합 보안 기능
표준 기반의 데이터 암호화 및 사용자 인증 : SSL (Secure Socket Layer), IEEE 802.1X, WPA-RADIUS
SSL을 통한 웹 기반 로그인 및 관리를 사용하는 보안 게스트 및 관리자 권한
구성 가능한 패킷 필터링 정책은 데이터 트래픽의 보안을 강화
내장 DOS 보호는 네트워크를 붕괴로부터 악의적인 해커의 공격을 방지
효과적인 사용자 관리
완벽한 인증 메커니즘 블록은 네트워크 확보 액세스로부터 사용자가 인증되지 않은
역할 기반 및 정책 기반 관리 정책은 악의적인 사용자에 대한 보호를 강화
"온라인 사용자 목록"은 각 개별 사용자의 실시간 상태를 모니터링
주문형 사용자를위한 세션 만료 제어는 시간과 데이터 볼륨에 의해 허용
유연한 회계 및 결제
프로그래밍의 결제 프로필 운영자 주문형 사용자에 대한 과금 계획을 사용자 정의할 수 있습니다
대역폭 제어는 사용자의 서로 다른 수준의 서비스 클래스를 가능하게하고 이익을 극대화
4ipnet 반경 영상 분광 분석기 (벤더의 특정 속성) 구현은 RADIUS 서버를 사용하여 회계 및 세션 제어에 대한 유연성을 추가
분석 및 유지 기록에 대한 자세한 사용 자별 트래픽 내역 로그
결제 리포트는 주문형 사용자를위한 거래 기록의 요약을 제공합니다.
지금 가격을 위해 전화
HSG100 무선 핫스팟 게이트웨이
핫스팟 작동 - 포장 기능, HSG100가 내장된 802.11 B / G 액세스 포인트, 웹 서버와 클라이언트를위한 웹 페이지 로그인하기 쉬운 브랜딩을위한 로고 로딩 핫스팟 매점, 간단한 사용자 / 방문객 계정 관리 도구, 지불 계획과 함께 제공 , 페이팔 신용 카드 게이트웨이, 트래픽 로그, IP 공유 등
상세 정보 핫스팟 가게를 열어하려면 HSG100은 ADSL / 케이블 / 위성 모뎀을 통해 인터넷에 연결하는 파이프와 함께 손가락 끝을입니다. HSG100 또한 여분의 장점 연행 - 벽 장착형, 먼지 방지 (IP50) 금속 주택.
HSG100는 소형 단일 - 포인트 무선 인터넷 접속 서비스를 제공하고자 미니 사이즈 매장을 대상으로, 가장 경제 아직 기능이 풍부한 무선 핫스팟 게이트웨이입니다. HSG100는 핫스팟 사업을 실행하는 초보자를위한 완벽한 선택입니다. 그것은 장비의 더미를 사려면 큰 돈이되지 않으며 여러 프리웨어의 아웃 접착제 여러 응용 프로그램에 대한 전문가의 능력을 받아 않습니다. 무선 인터넷 서비스를 제공, 하나 또는 여러 개의 작은 상점을 소유 자체 소유주 들어 HSG100 통해 아무런 마법도 없다. 대부분의 자동 서비스 상점과 치과 클리닉은 서비스의 HSG100들이 고객의 대기 시간 산들바람하게 찾습니다. 작은 커피 가게 칭찬 쿠폰을하여 시간 기반의 핫스팟 서비스를 제공하거나 쉬어 시간 부담하실 수 있습니다. 안전에 대한 무단 액세스를 방지하면서 같은 높은 수준의 네트워크 보안을 요구하는 회계 또는 법률 회사 등 소규모 전문 사무소 들어, 독립형 HSG100는 무료 고립된 방식으로 그들의 고객 또는 방문자에게 관리되는 인터넷 서비스를 제공하기 위해 사무실을 가능하게 인트라넷.
기능 및 이점
쉬운 설치 및 운영
고정 IP, DHCP 및 PPPoE를 통해 다양한 광대역 배포 옵션을 (T1, DSL, 케이블) 지원
통합 액세스 포인트는 와이파이 접속을 가능하게하고 추가 장치에 대한 필요성을 제거
내장 사용자 데이터베이스는 다른 작업 시나리오에 대한 충분한 계정 용량을 제공
방문자 기반, 주문형 작업에 사용자 계정을 제공하는 인스턴트 계정 발생기와 함께 작동
통합 보안 기능
표준 기반의 데이터 암호화 및 사용자 인증 : WEP, WPA, WPA2, IEEE 802.1X
SSL을 통한 웹 기반 로그인 및 관리를 사용하는 보안 게스트 및 관리자 권한
구성 가능한 패킷 필터링 정책은 데이터 트래픽의 보안을 강화
내장 DOS 보호는 네트워크를 붕괴로부터 악의적인 해커의 공격을 방지
효과적인 사용자 관리
완벽한 인증 메커니즘 블록은 네트워크 확보 액세스로부터 사용자가 인증되지 않은
역할 기반 및 정책 기반 관리 정책은 악의적인 사용자에 대한 보호를 강화
"온라인 사용자 목록"은 각 개별 사용자의 실시간 상태를 모니터링
시간을 기준으로 주문형 사용자를위한 세션 만료 제어 허용
유연한 회계 및 결제
프로그래밍의 결제 프로필 운영자 주문형 사용자에 대한 과금 계획을 사용자 정의할 수 있습니다
대역폭 제어는 사용자의 서로 다른 수준의 서비스 클래스를 가능하게하고 이익을 극대화
분석 및 유지 기록에 대한 자세한 사용 자별 트래픽 내역 로그
HSG200 무선 핫스팟 게이트웨이
상세 정보 
핫스팟 작동 - 포장 기능, HSG200는 브랜딩을위한 쉬운 로고 로딩 로그인 액세스 포인트, 웹 서버와 클라이언트의 웹 페이지를 802.11n/b/g 내장된 함께 제공되는 핫스팟 매점, 간단한 사용자 / 방문객 계정 관리 도구 지불 계획, 페이팔 신용 카드 게이트웨이, 트래픽 로그, IP 공유 등은 4ipWES (보도-N-연결) 기술을 탑재, HSG200이 버튼을 누르면 최대 2 액세스 포인트에있는 자동 WDS 링크를 설정할 수있다 . 무선 네트워크 범위를 확장하는 것은 산들바람이다. 핫스팟 가게를 열어하려면 HSG200은 ADSL / 케이블 / 위성 모뎀을 통해 인터넷에 연결하는 파이프와 함께 손가락 끝을입니다. HSG200 또한 여분의 장점 연행 - 벽 장착형, 먼지 방지 (IP50) 금속 주택.
무선 인터넷 서비스를 제공, 하나 또는 여러 개의 작은 상점을 소유 자체 소유주 들어 HSG200 통해 아무런 마법도 없다. 대부분의 자동 서비스 상점과 치과 클리닉은 서비스의 HSG200들이 고객의 대기 시간 산들바람하게 찾습니다. 작은 커피 가게 칭찬 쿠폰을하여 시간 기반의 핫스팟 서비스를 제공하거나 쉬어 시간 부담하실 수 있습니다. 안전에 대한 무단 액세스를 방지하면서 같은 높은 수준의 네트워크 보안을 요구하는 회계 또는 법률 회사 등 소규모 전문 사무소 들어, 독립형 HSG200는 무료 고립된 방식으로 그들의 고객 또는 방문자에게 관리되는 인터넷 서비스를 제공하기 위해 사무실을 가능하게 인트라넷.
802.11n/b/g와 2.4 기가 헤르츠 고출력 2 곱하기 2는 MIMO 필드 교체 안테나 및 이전 버전과 호환
* 안테나 다이버 시티 설계 데이터 전송 능력을 향상시키기 위해 연결 안정성을 향상시킵니다.
최적의 무선 커버 리지 및 현장 교체 유연성 * 두 개의 분리형 안테나.
* 최대 300Mbps까지 고속 IEEE 802.11n/b/g 무선 네트워크 인터페이스, 전송 속도를 갖추고.
쉬운 설치 및 운영
고정 IP, DHCP 및 PPPoE를 통한 지원 * 다양한 광대역 배포 옵션 (T1, DSL, 케이블).
* 통합 액세스 포인트는 와이파이 접속을 가능하게하고 추가 장치에 대한 필요성을 없애줍니다.
* 내장 사용자 데이터베이스 다른 운전 시나리오에 대한 충분한 계정 용량을 제공합니다.
* 방문자 기반, 주문형 작업에 사용자 계정을 제공하는 계정 생성기 주문형 좋다.
통합 보안 기능
* 표준 기반 데이터 암호화 및 사용자 인증 : WEP, WPA, WPA2, IEEE 802.1X.
* SSL을 통한 웹 기반 로그인 및 관리를 사용하는 보안 게스트 및 관리자 접속이 가능합니다.
* 구성 패킷 필터링 정책은 데이터 트래픽의 보안을 강화
푸시 버튼 4ipWES (보도-N-연결)은 자동 / 빠른 WDS 링크를 가능하게합니다.
* 내장 DOS 보호 네트워크를 붕괴로부터 악의적인 해커의 공격을 방지합니다.
효과적인 사용자 관리
* 완벽한 인증 메커니즘 블록은 네트워크에 대한 액세스 권한을 얻지 못하 사용자를 인증되지 않은.
* 역할 기반 및 정책 기반 관리 정책은 악의적인 사용자에 대한 보호 기능을 향상시킵니다.
* "온라인 사용자 목록"은 각 개별 사용자의 실시간 상태를 모니터링합니다.
* 시간을 기준으로 주문형 사용자 세션 만료 제어를 허용합니다.
유연한 회계 및 결제
* 프로그램의 결제 프로필 운영자 주문형 사용자에 대한 과금 계획을 사용자 정의할 수 있습니다.
* 대역폭 제어는 사용자의 서로 다른 수준의 서비스 클래스를 가능하게하고 이익을 극대화할 수 있습니다.
분석 및 유지 레코드에 대한 * 상세한 사용 자별 트래픽 내역 로그.
4ipnet HSG200-P 11n 와이파이 핫스팟 키트 - 네트워크 티켓 생성기 콤보 세트와 HSG200 802.11n/b/g 무선 핫스팟 게이트웨이
- 패키지 내용 : HSG200 11n 무선 핫스팟 게이트웨 X 1, SDS100 스마트 장치 서버 X 1, PRT100 POS 프린터 × 1
- 주문형 인터넷 접속을위한 간단한 푸쉬 버튼 계정 생성 및 티켓 인쇄
- 사용자 정의 청구 계획과 페이팔을 통한 온라인 신용 카드 결제
- 외부 RADIUS 인증 및 결제에 대한 지원 (부피에 의해 시간으로)
- 사용자 정의 로그인 / 담으로 둘러싸인 정원 브라우징하는 동안 브랜딩 및 광고 링크 페이지를 로그아웃.
상세 정보 4ipnet HSG200-P 와이파이 핫스팟 키트는 바로 상자의 핫스팟 가동 준비 비용 효율 아직 기능 포장 올인원 솔루션입니다. 그것은 미니 규모의 핫스팟 사업을위한 가장 경제적인 솔루션입니다. IEEE 802.11n/b/g, 2 × 2 MIMO, 이더넷 (포우) 이상의 전원 및 IP50 먼지 방지 금속 하우징을 갖춘 컴팩트 HSG200 무선 핫스팟 게이트웨이, 특별히 제공하는 소규모, 단일 원하는 미니 사이즈 점포를 대상으로 포인트 무선 인터넷 접속 서비스. 내장 사용자 데이터베이스와 사용자 정의 가능한 과금 계획으로, 그것은 점원의 책상에서 수요에 계정 생성을 가능하게합니다. 네트워크 확장 HSG200와 간단, 무선 범위를 확장하고자하는 핫스팟 소유자의 간단한 터치로 이렇게 할 수있는 버튼을 -로 4ipnet의 독자적인 기술, 4ipWES는 WDS 간편한 설치를위한 보도-N-연결 HSG200는 자동으로 암호화된 AES를 설립 4ipnet 액세스 포인트, 힘들이지 않고 안전하게 네트워크를 확장과 관련하여.
SDS100 스마트 장치 서버 및 PRT100 POS 프린터 구성된 4ipnet NetTicketGen 핫스팟 네트워크 티켓 생성기, 푸쉬 버튼 계정 생성 및 영수증 티켓 인쇄를 통한 계정 생성 및 결제 프로세스 수요에 효율적. SDS100는 HSG200에 청구 계획을 실행하여 주문형 계정을 생성하고 해당 계정의 티켓을 인쇄 PRT100 지시합니다. 전선 핫스팟 작업이 즉시 간단 해집니다; receptionists 및 출납 계원은 게이트웨이의 수동 구성을 거치지 SDS100에 몇 가지 버튼을 눌러 액세스 영수증을 고객 또는 방문 고객을 제공할 수 있습니다. 모든 4ipnet은 WHG / 반구형 그레인 (HSG) 장치는 호환되며 NetTicketGen 쉽게 통합할 수 있으며, 각 WHG / 장치를 반구형 그레인 (HSG)가 동시에 로컬 네트워크를 통해 여러 NetTicketGen 세트를 지원할 수 있습니다.
측면에 현금을 조금 만들기!
측면에 현금 장면 제작하면서 무선 인터넷 접속을 제공함으로써, 고객과 손님을 행복하게 유지. 와이파이 발권 시스템은 청구서에서 보안에 이르기까지 모든 처리를 취할 수 있습니다. HSG200 + 귀하의 비즈니스에 충분 거의 알려진 회사 4ipnet에서 SDS100 시스템인가요? 알아 우리의 검토를 읽으십시오.
4ipnet의 HSG200 무선 핫스팟 및 키트를 발권 후 제품 Zyxel의 경쟁 발권 시스템의 상당히 심각한 수준의 페어입니다. 그것은 understated 블랙으로 마무리보다 사무 보인다. 키트는 포함 RS-232 케이블을 사용하여 제공된 열 티켓 프린터를 연결하는 HSG200 라우터와 SDS100 발권 컨트롤러가 포함되어 있습니다. HSG200 및 SDS100 모두 벽이나 책상에 고정하는 그들을 쉽게하기 위해 스틸 케이스와 마운트 지점으로 ruggedised있다. 심지어 티켓 프린터는 거기에 reassuringly 견고한 느낌을 가지고 있습니다.
개인 네트워크에 대해 하나와 공용 네트워크에 대해 하나 - 주요 HSG200 단위는 WAN 포트, 2.4 기가 헤르츠 고출력 300Mbit / s의 802.11n 무선 두 10/100Mbit/s 랜 포트가있는 비교적 간단한 라우터입니다. 더 중요한 건,뿐만 아니라 동시에 개인 및 공용 네트워크와 같은, 그것은 사용자가 직불카드 또는 신용 카드를 사용하여 액세스를 구매할 수 있도록하려는 경우 발권 시스템, 가격 책정 및 지불 처리를 제어하는 데 도움이 추가 옵션을 많이 가지고 있습니다.
SDS100는 10 개의 다른 티켓 계획까지 선택할 수 있도록 버튼이 있습니다 - 각 계획의 가격과 기간은 사용자의 요구에 맞게 구성할 수 있습니다. 당신은 항공권 여러 tills 또는 위치에서 판매할 수 있도록 한 HSG200 라우터에 여러 발권 장치를 연결할 수 있지만 하나의 사설 네트워크 LAN 포트에 이더넷 스위치를 통해 이들을 연결해야합니다.
단일 전용 LAN 포트가되고있다보다는 그것이 약간 더 복잡하게 있지만, 기본 설정 및 구성이 gratifyingly 간단했다. 당신이 스위치가없는 경우 발권 콘솔을 연결하기 전에, 그것은 LAN 연결을 통해 라우터의 초기 구성을 알아보게 권할.
일단 라우터의 간단한 웹 기반 구성 마법사를 실행하고 사설 LAN 포트에 SDS100를 연결했다면, 시스템은 기본적인 방법이라도 즉시 기능입니다. 물론, 추가 구성은 공공 및 민간 모두 무선 네트워크에 대해 원하는 보안 설정을 설정하는 것, 절대적으로 필요하다 - 우리가 사설 네트워크를 위해 WPA2를 제안하고 공공 하나 열어 - 당신은 쉽게 무선으로 추가 구성을 수행할 수 있습니다.
기본 방화벽은 기본 비중은 공용 네트워크의 트래픽과 아웃을 제어할 수 있습니다. 라우팅 테이블은 더 복잡 라우팅에 대해 NAT 설정을 구성할 수 있지만, 우리는 오히려 모두를 처리하도록 HSG200를 사용하여보다 네트워크의 나머지 부분에 액세스하지 않고 이런 종류의 게스트 액세스 시스템에게 자사 전용 인터넷 연결을 부여 권장 공개 및 보안 전용 라우팅 요구 사항.
이러한 기능과 함께 당신이 그토록 비디오 및 음성 트래픽과 같은 몇 가지 다른 종류를 위해 최대 위쪽 및 다운 스트림 연결 속도를 정의할 수있는 서비스 (QoS 보장) 시스템의 멋지게 구현 품질입니다. 우리가 장치 않는 한 절대적으로 필요한 경우뿐만 아니라 몇 가지 네트워크 점검 및 상태 도구에 대한 원격 액세스를 활성화하지 않는 것이 좋습니다 있지만, 다양한 DDNS 업체에 대한 지원도있다.
HSG200의 가장 중요한 기능은 명확 서브 메뉴가 쉽게 HSG200의 10 각 옵션에 대한 액세스 티켓 다양한 유형을 지정할 수 있도록 이용자 메뉴로 결제됩니다. 티켓은 다른 기간이과 가격으로 정의할 수 없으며 또한 그들이 특정 시간에 만료 심지어 티켓에 인쇄되는 로고 이미지를 업로드하도록 선택할 수 있습니다. 당신은 외부 지불 게이트웨이를 설정하는 경우들이 네트워크에 로그온, 오히려까지에서 직접 티켓을 구입하는 것에 비해 때, 손님들은 신용 카드에 액세스하기위한 비용을 지불할 수 있습니다. 결제 Authorize.Net, 페이팔, SecurePay 또는 WorldPay를 통해 처리할 수 있습니다.
WHG401 안전한 무선랜 컨트롤러
4000 로컬 계정 내장과 기가 비트 이더넷의 WHG401 보안 WLAN 컨트롤러, 3,000 주문형 계정, 기업, 대학, 호텔, 공항 터미널, 그리고 MDUs / MTUs 포함한 중소 규모의 무선랜 구축을위한 이상적인 보안 솔루션입니다. WHG401는 "방문자 계정 프로 비저닝", "유연한 회계 및 청구", 그리고 단순화된 관리 기능과 인스턴트 이동성을 제공하는 한 상자에 "중앙 집 중식 무선랜 관리" "보안 액세스 제어"를 통합합니다.
가격 호출합니다.
상세 정보 
With more powerful hardware, WHG401 is capable of centrally managing 190 access points (150 x EAP700 + 40 x other 4ipnet single radio AP) to cover a wider service area in a smaller network.
Simplified Deployment and Reliable Internet Connection
Gigabit Ethernet to meet higher data rate demands of larger networks
Easy to deploy, highly scalable platform allows overlay with existing wired/wireless infrastructure without disruption
Load balancing and WAN failover enhance bandwidth utilization and provide more reliable Internet connection
Powerful Network Security Capabilities for Enterprise Applications
Standards-based data encryption: WEP, WPA, WPA2, IEEE 802.1X, and IPSec VPN
Secure guest and administrator access using web-based login and administration over SSL
Diverse user authentication methods, including built-in Local and On-demand database; supports external authentication servers including POP3, LDAP, RADIUS, Windows Domain, and SIP registrar
Built-in DoS protection keeps malicious hackers from collapsing the network
Site-to-site VPN tunnels allow branch offices to securely connect with one another and share the same account database
Comprehensive Access Control and User Management
Role-based access control and policy enforcement offer management of privileges for different user groups
On-demand account generation provides secure and managed user accounts to visitors
Service Zone function partitions a physical network into up to 9 virtual networks, each with its own definable access control and group policy profiles. Allows hotspot owners to provide various levels of customized services
Individual user bandwidth limit enables flexible traffic control for different scenarios
Centralized Access Point (AP) Management
Centralized remote control and automatic AP discovery
Management and monitoring of managed APs via web-based administration interface, including AP's system settings, online status, enabling/disabling, reset, and firmware upgrade
Periodically monitors APs and notifies the administrator of problematic APs
Flexible Accounting and Easy Billing
Configurable billing profiles allow operators to customize billing plans for on-demand users
Support online payment with credit card through Authorize.net, PayPal and SecurePay
Support for Location-Based Hotspot Services and Customizable UAM Web Pages
The logical concept of Service Zone allows the Controller to differentiate clients by locations and to provide different user experiences (such as different login pages) and network policies
When coupling with VLAN switches and DSLAM devices, the Controller can use its Port Mapping feature to tell the location of each client and therefore provide differentiated services. For example, a hotel guest would not need to type in the password again every time when accessing the Internet in room
By setting up multiple Service Zones and utilizing customized pages or external pages, a single Controller can serve multiple hotspot franchises transparently to the clients
PMS Integration for Hotel Applications
By interfacing the 3rd party middleware – NetRetriever, the controller is able to post billing information to multiple kinds of hotel PMSs, including Micros Fidelio/Opera, HiRUM, RMS, CMS Hospitality, EzyRez, RoomMaster2000, Charts and etc
A hotel guest can obtain an Internet access account at check-in counter, or sign up for the Internet access service in room anytime without the help of clerks. With PMS integration, the guest will receive a single room bill
With a single account, a guest will be able to access the Internet by wire in room or by wireless connection anywhere within the service range of APs connecting to the Controller
Call for Price Now
WHG505 Secure WLAN Controller
The WHG505 Secure WLAN Controller in Gigabit Ethernet with built-in 6,000 local accounts, 4,000 on-demand accounts, is an ideal security solution for medium-to-large scale WLAN deployments, including enterprises, campuses, hotels, airport terminals, and MDUs/ MTUs. The WHG505 integrates “secure access control”, “visitor account provisioning”, “flexible accounting and billing”, and “centralized WLAN management” into one box to provide simplified manageability and instant mobility. With more powerful hardware.
Call for price.
More Details 
WHG505 is capable of centrally managing 230 access points (150 x EAP700 + 80 x other 4ipnet single radio AP) to cover a wider service area in a smaller network.
WHG505 – Secure WLAN Controller
Simplified Deployment and Reliable Internet Connection
Gigabit Ethernet to meet higher data rate demands of larger networks
Easy to deploy, highly scalable platform allows overlay with existing wired/wireless infrastructure without disruption
Load balancing and WAN failover enhance bandwidth utilization and provide more reliable Internet connection
Powerful Network Security Capabilities for Enterprise Applications
Standards-based data encryption: WEP, WPA, WPA2, IEEE 802.1X, and IPSec VPN
Secure guest and administrator access using web-based login and administration over SSL
Diverse user authentication methods, including built-in Local and On-demand database; supports external authentication servers including POP3, LDAP, RADIUS, Windows Domain, and SIP registrar
Built-in DoS protection keeps malicious hackers from collapsing the network
Site-to-site VPN tunnels allow branch offices to securely connect with one another and share the same account database
Comprehensive Access Control and User Management
Role-based access control and policy enforcement offer management of privileges for different user groups
On-demand account generation provides secure and managed user accounts to visitors
Service Zone function partitions a physical network into up to 9 virtual networks, each with its own definable access control and group policy profiles. Allows hotspot owners to provide various levels of customized services
Individual user bandwidth limit enables flexible traffic control for different scenarios
Centralized Access Point (AP) Management
Centralized remote control and automatic AP discovery
Management and monitoring of managed APs via web-based administration interface, including AP's system settings, online status, enabling/disabling, reset, and firmware upgrade
Periodically monitors APs and notifies the administrator of problematic APs
Flexible Accounting and Easy Billing
Configurable billing profiles allow operators to customize billing plans for on-demand users
Support online payment with credit card through Authorize.net, PayPal and SecurePay
Support for Location-Based Hotspot Services and Customizable UAM Web Pages
The logical concept of Service Zone allows the Controller to differentiate clients by locations and to provide different user experiences (such as different login pages) and network policies
When coupling with VLAN switches and DSLAM devices, the Controller can use its Port Mapping feature to tell the location of each client and therefore provide differentiated services. For example, a hotel guest would not need to type in the password again every time when accessing the Internet in room
By setting up multiple Service Zones and utilizing customized pages or external pages, a single Controller can serve multiple hotspot franchises transparently to the clients
PMS Integration for Hotel Applications
By interfacing the 3rd party middleware – NetRetriever, the controller is able to post billing information to multiple kinds of hotel PMSs, including Micros Fidelio/Opera, HiRUM, RMS, CMS Hospitality, EzyRez, RoomMaster2000, Charts and etc
A hotel guest can obtain an Internet access account at check-in counter, or sign up for the Internet access service in room anytime without the help of clerks. With PMS integration, the guest will receive a single room bill
With a single account, a guest will be able to access the Internet by wire in room or by wireless connection anywhere within the service range of APs connecting to the Controller
Call for Price Now
WIFI, DVR, Night Vision,Water Resist
Waterproof Wireless and Wired camera ideal for outdoor use. Can be used indoor as well. Shipped with all installation accessories. Requires power AC or DC power for operation. Night vision up to 65ft enables remote surveillance of large areas. Simple installation. Extends the view to environmental harsh environments. Easy to setup and use. Feature-rich waterproof IP security camera. So powerful in what it allows you to do.
More Details Primary Function: Waterproof IP Security Camera with WIFI and Night Vision
Day and night vision with 48 IR LED's (night visibility up to 20 meters)
Multi-level users access and management with password protection.
Allows remote viewing video and record from any internet connection.
Wi-Fi compliant with IEEE 802.11b/g on 2.4 Ghz ISM frequency band.
Cisco WVC210 Wireless IP Camera
The Cisco WVC210 wireless IP camera boasts pan/tilt and digital zoom functions (PTZ) and is compatible with WiFi 802.11g, giving you greater control when it comes to camera movement and focus.
Recording can be activated using a motion trigger or the manual or schedule recording mode. Night vision on the WVC210 means remote video monitoring is possible in all lighting conditions. And the Cisco WVC210 can also send alerts by e-mail to an FTP account, pager or mobile.
Be instantly informed of unusual activities while you're away – wherever you happen to be – thanks to the Cisco WVC210 .
More Details | 일반 | Device Type | Network camera |
|---|---|---|
| Width | 3.2 cm | |
| Depth | 17.5 cm | |
| 고도 | 19.9 cm | |
| 무게 | 460 g | |
| 카메라 | 유형 | Colour – Day&Night – pan / tilt |
| Video Format | NTSC, PAL | |
| Digital Video Format | MPEG-4, MJPEG | |
| Digital Zoom | 2 | |
| Minimum Illumination | 1 lux – F2.0 | |
| 비디오 캡처 | 640 x 480 @ 30 fps ¦ 320 x 240 @ 30 fps ¦ 160 x 120 @ 30 fps | |
| Still Image | JPEG | |
| Audio Support | Yes : built-in microphone | |
| 특징 | LCD panel, motion sensor, IR filter, remote control, auto exposure control, auto white balance, brightness control, contrast control, e-mail alerts, image flip, image mirror | |
| Image Sensor | 유형 | CMOS 1/4″ |
| Effective Pixels | 640 x 480 | |
| Lens Construction | Min Focus Range | 50 cm |
| Panning | Range (degree) | -67 to +67 |
| Titling | Range (degree) | -34 to +30 |
| Interfaces | 네트워킹 | Ethernet 10Base-T/100Base-TX, IEEE 802.11b, IEEE 802.11g – DDNS, DHCP, FTP, HTTP, NTP, SMTP, TCP/IP, RTSP, RTP |
| Expansion / Connectivity | Interfaces | 1 x network – Radio-Ethernet ¦ 1 x network – Ethernet 10Base-T/100Base-TX – RJ-45 ¦ 1 x microphone – input – mini-phone 3.5mm ¦ 1 x audio – output – mini-phone 3.5mm |
| 여러 가지 잡다한 | Included Accessories | 서다 |
| Cables Included | 1 x network cable | |
| Compliant Standards | CE, UL, FCC | |
| 권력 | Power Requirements | DC 5 V |
| Power Device | Power adapter – external | |
| Software / System Requirements | Software Included | Drivers & Utilities |
| OS Required | Microsoft Windows 2000, Microsoft Windows XP Professional SP2, Microsoft Windows Vista, Microsoft Windows 2003 | |
| System Requirements Details | Pentium 4 – 2.4 GHz – RAM 512 MB – HD 80 Byte | |
| Environmental Parameters | Operating Temperature | 0 °C … 45 °C |
| Relative Humidity (operating) | 10 – 80% |
Cisco VC 240-K9 Bullet Network POE Camera – Day/Night
The Cisco VC 240-K9 Bullet Network camera lets you keep a close eye on your property – day and night – from any location.
Product details:
- View live video and audio from your business wherever you are – day and night – using an internet-connected computer or mobile phone
- Integrate alarms, door sensors, motion detectors and other business systems into your video set-up
- Receive automatic alerts, including video clips or still images, whenever motion is detected on your premises
- Mount the rugged indoor/outdoor camera on a ceiling or wall
- Quickly search video archives, and configure and control your camera with the included video monitoring software
More Details | Sensor | 1/3.3″ WDR |
| Viewfinder | Varifocal board lens Focal length: 500 mm – infinity Field of view: 23.9 – 89.9° F/1.7 to 0.4 lux (day mode) 0 lux (night mode) |
| Interface | Ethernet with PoE Microphone jack Speaker output Power (12 V, 1 A) GPIO (General-Purpose I/O) |
| Other functions | Protocols: TCP/IP, HTTP, HTTPS, DHCP (Dynamic Host Configuration Protocol), SMTP (Simple Mail Transfer Protocol), FTP, NTP (Network Time Protocol), DNS (Domain Name System), UPnP, RTP (Real-Time Transport Protocol), RTSP (Real Time Streaming Protocol), DDNS (Dynamic DNS), Bonjour and Jabber |
Cisco PVC300 Small Business Internet Camera
Know what's happening on your premises with this Cisco PVC300 internet camera!
The easy-to-install PVC300 by Cisco boasts PoE (Power over Ethernet) technology and a simple user interface, as well as several motion detection functions, an optical zoom, automatic exposure control and light adjustment.
More Details | 일반 | Device Type | Network camera |
|---|---|---|
| Width | 14.4 cm | |
| Depth | 15.7 cm | |
| 고도 | 13.9 cm | |
| 무게 | 0.68 kg | |
| 카메라 | 유형 | Colour – pan / tilt / zoom |
| Video Format | NTSC, PAL | |
| Digital Video Format | MPEG-4, MJPEG, 3GPP | |
| Digital Zoom | 4 | |
| Minimum Illumination | 1 lux – F1.9 | |
| 비디오 캡처 | 640 x 480 @ 30 fps ¦ 320 x 240 @ 30 fps ¦ 160 x 120 @ 30 fps | |
| Still Image | JPEG | |
| Audio Support | Yes : two-way audio capability | |
| 특징 | Motion sensor, progressive scan CCD system, auto exposure control, auto white balance, brightness control, Power over Ethernet, e-mail alerts | |
| Image Sensor | 유형 | CCD 1/4″ |
| Lens Construction | Optical Zoom | 2.6 x |
| Focal Length | 600 mm | |
| Lens Iris | Fixed iris | |
| Focus Adjustment | Automatic | |
| Angular Field of View (degree) | 28.7 x 21.6 – 73.4 x 54.7 | |
| Panning | Range (degree) | -175 to +175 |
| Titling | Range (degree) | -35 to +90 |
| Interfaces | 네트워킹 | Ethernet 10Base-T/100Base-TX – DDNS, DHCP, DNS, FTP, HTTP, NTP, SMTP, TCP/IP, RTSP, RTP, UPnP, Bonjour |
| Alarm Inputs Qty | 일 | |
| Alarm Outputs Qty | 일 | |
| Expansion / Connectivity | Interfaces | 1 x network / power – Ethernet 10Base-T/100Base-TX – RJ-45 ¦ 1 x microphone – input – mini-phone 3.5mm ¦ 1 x speakers – output – mini-phone 3.5mm |
| 여러 가지 잡다한 | Included Accessories | Ceiling mount kits |
| Cables Included | 1 x network cable – 1.8 m | |
| Compliant Standards | CE, UL, FCC 제 15 B | |
| 권력 | 전원 요구 사항 | AC 120 V - DC 12 V / 포 |
| 전원 장치 | 전원 어댑터 - 외장형 7.2 와트 | |
| 소프트웨어 / 시스템 요구 사항 | 소프트웨어 포함 | 드라이버 및 유틸리티 |
| 운영 체제 필수 | 마이크로 소프트 윈도우 비스타 / XP | |
| 인터페이스 / 주변 기기 | 1백28메가바이트 메모리 AGP 그래픽 카드 | |
| 시스템 요구 사항 세부 | 펜티엄 4-2 GHz의 - 램 512메가바이트 | |
| 환경 매개 변수 | 작동 온도 | 0 ° C ... 50 ° C |
| 상대 습도 (운영) | 20~85% |
SP-650 번개 수호자
SP-650 번개 수호자는 전기가 서지 및 전원 스파이크가 일반적으로 뇌우의 상황에서 발생하여 손상되지 않도록 무선 장비를 보호합니다. 이것은 시스템 성능을 손상시키지 않고 야외 장비를 802.11a/b/g에 대한 보호 기능을 제공할 수있는 낮은 삽입 손실과 DC에서 최대 6GHz로 작동하도록 설계되었습니다. N-타입 커넥터 설계는 쉽게 N 타입 커넥터와 다른 N 케이블 사이에 위치하고 있습니다.
상세 정보 커넥터 유형 : NB / H 잭에 N 플러그
임피던스 : 50Ω
주파수 범위 : DC ~ 6GHz
VSWR :
2.19GHz에서 1.17
5.61GHz에서 1.24
삽입 손실 : 0.62dB 최대
2.48GHz에서 0.297dB
5.89GHz에서 0.614dB
직류 항복 전압 : 90V ± 20%
절연 저항 : MΩ> 10,000
임펄스 항복 전압 : 10KV 분 (1.2/50μS 파형)
최대 전류 견딜 : 5KA 분 (8/20μS 파형)
5Ghz 8dBi 옴니 - 지향성 안테나
이 제품은 낮은 손실 케이블의 사용을위한 필요없이 액세스 포인트에 직접 연결할 수있는 남성 N-타입 커넥터와 8 dBi 옴니 안테나입니다. 이것은 쉽고 빠르고 안정적인 액세스 포인트와 리피터 배포를 지원합니다.
상세 정보 • Frequency Range: 5.1Ghz – 5.9Ghz
• Antenna Gain: 8dBi
• Polarization: Vertical, Omni-Directional
• VSWR: < 1.5 : 1
• Maximum Input Power: 50 watts
• Vertical Beamwith: 17 degrees
• Horizontal Beamwidth: 360 degrees
• Impedance: 50 ohms
• Dimension: 375mm(L) x 17mm(D)
• Weight: 200g
• Connector Type: N-Type Male
• Housing Material Fiberglass
• Operating Temperature -40°C to +80°C
Grid Parabolic Antenna / 27 dB, N-Type Female Connector, 5.5~5.835GHz
ANT58-027GN is a 5.5 ~ 5.835GHZ Grid Antenna with 27dB with N-Type Female Connector and DC Ground Lighting Protection, which is designed for Outdoor WLAN Application. The Grid Antenna is applied to link two Access Point between two locations such as two buildings or more. With all the features, ANT58-027GN is an ideal device for 5.8G Wireless LANs, public wireless hotspot application and other multipoint applications where wide coverage is needed.
More Details 
특징 :
1. Grid Parabolic Antenna
2. Working on 5.5~5.835GHz
3. High 27dbi gain to extend coverage
4. Provide pole mounting
5. H-Plane 8.5° / E-Plane 6.6°
Specifications:
Frequency 5.5 ~ 5.835GHz
Type Grid
Polarization Vertical
Gain 27dBi
VSWR ≦2.0
Beam Width H-Plane 8.5° E-Plane 6.6°
Impedance 50Ω± 5Ω
Connector Type N Type (Female)
Environmental & Mechanical Characteristics
Temperature -30℃ ~ +60℃
Lightning Protection DC Ground
Radome ABS
Dimensions ∮150×600mm
Weight 2860g±50g (w/mount)
EnGenius 2.4GHz 7dBi Omni Antenna
This compact 2.4GHz omni directional “rubber-duck” WiFi antenna provides broad coverage and 7 dBi gain. It is a coaxial sleeve design with an omni-directional pattern. It is ideally suited for IEEE 802.11b and 802.11g wireless LANs, This flexible antenna features a tilt-and-swivel reverse-polarity SMA connector, allowing them to be used vertically, at a right angle, or any angle in-between. It is suitable as a replacement RF antenna for many access points and radios that are equipped with reverse-polarity SMA connectors. Length 230mm.
2.4Ghz 5dBi Omni-Directional Antenna
This product is a 5 dBi Omni antenna with a male N-Type connector that can connect directly to the Access Point without the need for the use of a low-loss cable. This supports easy, rapid and reliable access point and repeater deployments.
More Details ANT-OD-242505M 2.4GHz – 2.5GHz 5dBi Mesh Omni-Directional Antenna
Frequency Range: 2.4GHz – 2.5GHz
Antenna Gain: 5dBi
Polarization: Vertical, Omni-Directional
VSWR: ≤ 1.5 : 1
Maximum Input Power: 50 watts
Vertical Beamwidth: 20 degrees
Horizontal Beamwidth: 360 degrees
Impedance: 50 ohms
Dimension: 330mm(L) x 17mm(D)
Weight: 85g
Connector Type: N-Type Male
Housing Material: Fiberglass
Operating Temperature: -40°C to +80°C
Grid Parabolic Wireless Antenna / 24 dB, N-Type Female connector
ANT-224GN, Wireless Antenna is a 2400 ~ 2500MHz Grid Parabolic 24dBi Wireless Antenna with N-Type Female Connector and DC Ground Lighting Protection, which is designed for Outdoor WLAN Application. The Grid Parabolic Directional Wireless Antenna is applied to link two Access Point between two locations such as two buildings or more. With all the features, ANT-224GN, Wireless Antenna is an ideal device for long distance 2.4G Wireless LANs, public wireless hotspot application and other multipoint applications where wide coverage is needed.
More Details 
특징 :
1. Grid Parabolic Antenna
2. Working on 2400MHz
3. High 24dbi gain to extend coverage.
4. Pole mounting supplied.
Specification
Frequency 2400 ~ 2500MHz
Type Grid Parabolic
Polarization Linear, Horizontal / Vertical
Gain 24dBi
VSWR 2.0:1
Beam Width H-Plane 9° E-Plane 11°
Impedance 50Ω
Connector Type N-type(female)
Environmental & Mechanical Characteristics
Temperature -40 to 85℃
Lightning Protection DC Ground
Radome ABS, UV resistant
Dimensions 1000 x 600 mm
Weight 5 kg
EAP100 Enterprise Access Point
The industrial-grade EAP100 Enterprise Access Point with IP50 dust-proof metal housing is designed for high-performance wireless connectivity in either enterprise or industrial environments of all dimensions. It addresses wireless security concerns with the latest industry standards-based security such as 802.1X and Wi-Fi Protected Access with per user, per session encryption. EAP100 features multiple VLAN support coupled with multiple-SSID capability – one AP can simultaneously emulate up to eight Virtual APs with different ESSIDs.
More Details By supporting 802.1p/802.1Q QoS and 802.11e WMM, EAP100 ensures the quality of communication for multimedia applications like voice, audio and video. The dual IEEE 802.3af PoE compliant design not only provides both data transfer and power supply through the same Ethernet cable but supports redundant connectivity with failover function.
Features & Benefits
High Speed IEEE 802.11g and Backward Compatible with 802.11b
Equipped with a high-speed IEEE 802.11g wireless network interface based on Atheros™ chipset, transmission rates up to 54Mbps
WDS Repeater for Extending Wireless Coverage
Creates structural WDS (Bridge or Repeater) links connecting to other WDS-capable APs
Repeater links can serve as EAP100′s LAN connections to replace Ethernet ports, or simply bridge the wired side and the wireless side as a single network
Supporting QoS & 802.11e WMM
Supports IEEE 802.1p/IEEE 802.1Q Quality of Service (QoS) tagging features
Supports IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty multimedia applications like voice, audio and video
Business-class WLAN Security & Client Authentications
Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key)
Wireless LAN segmentation, Disable SSID Broadcast and the option of station-isolation
Ability to be configurable to filter out unauthorized wireless clients with build-in MAC-based access control list or via a back-end RADIUS server by sending an authentication request
Support business-class WLAN security, multiple-SSID, and VLAN tagging
Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key).
Support multiple ESSIDs and VLAN tagging.
MAC ACL list & RADIUS client support for filtering out unauthorized wireless clients.
Multiple Virtual APs & Capability of Client Isolation
One EAP100 can emulate up to 8 Virtual APs (VAP), each with its own ESSID; namely, one AP can have 8 ESSIDs
Each VAP appears to clients as an independent AP and its traffic and be associated with a VLAN ID
Supports client isolation, isolated from each other under one AP
Wall mountable Dust-proof Metal Housing
Enclosed in a metal housing, durable and non-fire hazard for the industrial environment
Dual-PoE with Link Failover
The IEEE 802.3af Power over Ethernet (PoE) compliant design eliminates the need for power sockets, allows installation of this device in areas where power outlets are not readily available to improve deployment flexibility, and provides standard based compatibility with other device
Provides dual-PoE 10/100 Fast Ethernet ports with failover function for redundant connectivity
EAP300 Enterprise Access Point
Embedded with 802.11 n/a/b/g dual-band MIMO radio in dust-proof metal housing, the high speed (up to 300Mbps) and durable EAP300 Enterprise Access Point is designed for wireless connectivity in enterprise or industrial environments of all dimensions.
More Details EAP300 comes with all standards demanded by enterprise applications, including business-grade security (802.1X, WPA and WPA2), and multiple ESSIDs with VLAN tags to separate the traffics of different departments. Beyond common expectations, EAP300's real surprise is the patent-pending WES (Press-n-Connect) technology. Bridging multiple EAP300s is at the touch of a button with 4ipWES, which enables a quick and automatic WDS Easy Setup by pressing the WES button on EAP300. Extending wireless network coverage is a breeze. Supporting up to 300Mbps wireless speed with its 802.11n 3×3 MIMO solution, and a gigabit Ethernet interface, EAP300 is perfect for bandwidth-hungry applications such as video surveillance, multi-media streaming over wireless. The QoS – WMM ensures the quality of voice/video when multiple applications are transmitting media and data over the air simultaneously. EAP300′s higher throughput, security and durability make it a perfect choice of wireless connectivity for your business.
Features & Benefits
Dual-band 3 x 3 MIMO Field Replaceable Antenna & Backward Compatible with 802.11a/b/g
The antenna diversity design enhances the connection reliability to improve data transmission capability
Three detachable high-gain antennas for optimal wireless coverage and field replaceable to meet customer demands for specific environment
Equipped with a high-speed IEEE 802.11n/a/b/g wireless network interface, transmission rates up to 300Mbps
WDS/Repeater for Extending Wireless Coverage
Creates structural WDS (Bridge or Repeater) links connecting to other WDS-capable APs
Repeater links can serve as EAP300′s LAN connections to replace Ethernet ports, or simply bridge the wired side and the wireless side as a single network
Supporting QoS & 802.11e WMM
Supports IEEE 802.1p/IEEE 802.1Q Quality of Service (QoS) tagging features
Supports IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty multimedia applications like voice, audio and video
Business-class WLAN Security & Client Authentications
Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key)
Wireless LAN segmentation, Disable SSID Broadcast and the option of station-isolation
4ipWES (Press-n-Connect) with push button enables quick/auto WDS link
Ability to be configurable to filter out unauthorized wireless clients with build-in MAC-based access control list or via a back-end RADIUS server by sending an authentication request
Multiple Virtual APs & Capability of Client Isolation
One EAP300 can emulate up to 8 Virtual APs (VAP), each with its own ESSID; namely, one AP can have 8 ESSIDs
Each VAP appears to clients as an independent AP and its traffic and be associated with a VLAN ID
Supports client isolation, isolated from each other under one AP
Wall mountable Dust-proof Metal Housing
Enclosed in a metal housing, durable and non-fire hazard for the industrial environment
Gigabit Ethernet port with PoE
The IEEE 802.3af Power over Ethernet (PoE) compliant design eliminates the need for power sockets, allows installation of this device in areas where power outlets are not readily available to improve deployment flexibility, and provides standard based compatibility with other device
Provides 10/100/1000 Gigabit Ethernet port, matching the wire and wireless throughput.
EAP700 Wall Jack Access Point
The EAP700 Wall Jack Access Point is an in-the-wall Wi-Fi IEEE 802.11b/g AP, designed to blend with any office or home interior architecture or furnishings effortlessly. The compact EAP700 in a small form factor lays snug in a standard wall outlet box, and hides the wall cutout with its faceplate. Its front panel features LED status indicators and a RJ45 wall jack.
More Details It has the interfaces to serve both wireless and wired LAN access. The simplistic yet chic design of EAP700 allows it to blend into a working or a living environment practically and elegantly. By utilizing PoE, EAP700 comes with an advantage of running fewer cables in the duct. The Power over Ethernet (PoE) LAN port on the EAP700 serves as the power feed as well as the wired network feed. Optionally, it can also be powered via an AC adapter when PoE switch is not available.
Standalone, EAP700 is an easy-to-install and cost-effective solution for most of indoor wireless deployments, including hotel rooms, apartments, offices, classrooms, libraries, private homes, public kiosks, etc. When working under one of 4ipnet Controllers, the combined network turns into an intelligent building solution, a managed internet service, or a Wi-Fi hotspot network of various scales. Multi-pack is available at lower cost to contractors/builders for larger deployments.
Features & Benefits
Hidden in-the-wall behind faceplate, blending well into most of interior/architectural designs
Clean and stylish look. The main unit fits in a standard size outlet box, hidden behind the wall-jack faceplate.
The faceplate is a two-piece design, slide-able for adjusting the depth of the portion that goes in-the-wall, and for covering the mistakes around the cut-out hole.
Easy to install, fewer cables to run, flexible power feed options, meeting building codes
The IEEE 802.3af Power over Ethernet (PoE) eliminates the need for power sockets, allowing installation of this device in areas where power outlets are not readily available to improve deployment flexibility.
Using a single CAT5e cable feed both power and Ethernet data. Optional AC power feed is available.
High speed interface and QoS/WMM support,ideal for voice, video, and data applications
Equipped with a powerful, high-speed IEEE 802.11b/g wireless interface and hidden 2.4GHz antenna.
With the additional QoS/WMM support, EAP700 is ideal for converged voice, video, and data applications.
Connections for both wireless and wired clients
Keep the style of a simple LAN wall jack while being able to serve both LAN and WLAN devices.
Support business-class WLAN security, multiple-SSID, and VLAN tagging
Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key).
Support multiple ESSIDs and VLAN tagging.
MAC ACL list & RADIUS client support for filtering out unauthorized wireless clients.
Flexible deployment – standalone, or managed in an intelligent building solution
Stand-alone, EAP700 is a full AP (without router), normally chained from a modem router to service clients.
WDS links can be established to bridge other APs for extending WLAN coverage.
Supports client isolation, important in a hotspot or hospitality environment.
When managed under a 4ipnet Controller, such as the WHG-series, the combination has been pre-integrated to provide solutions for many applications.
EAP200 Enterprise Access Point
Embedded with 802.11n/b/g 2.4GHz MIMO radio in IP50 dust-proof metal housing, the high speed (up to 300Mbps) and durable EAP200 Enterprise Access Point is designed for wireless connectivity in enterprise or industrial environments of all dimensions.
More Details EAP200 makes the wireless communication fast, secure and easy. It supports business grade security such as 802.1X, and Wi-Fi Protected Access (WPA and WPA2). By pushing a purposely built button, 4ipWES (Press-n-Connect) feature makes it easy to bridge wireless links of multiple EAP200s for forming wider wireless network coverage. EAP200 also features multiple ESSIDs with VLAN tags; one EAP200 can emulate up to eight Virtual APs, great for enterprise applications, such as separating the traffics of different departments using different ESSIDs.
Supporting up to 300Mbps wireless speed with its 802.11n 2 x 2 MIMO solutions, EAP200 is perfect for bandwidth-hungry applications such as video surveillance, multimedia streaming over the wireless links. Its QoS – WMM feature ensures the quality of voice/ video when multiple applications are transmitting media and data over the air at the same time.
EAP200's higher throughput, security and durability make it a perfect choice of wireless connectivity for your applications.
2.4GHz 2 x 2 MIMO Field Replaceable Antenna & Backward Compatible with 802.11n/b/g
The antenna diversity design enhances the connection reliability to improve data transmission capability
Two detachable antennas for optimal wireless coverage and field replacement flexibility
Equipped with a high-speed IEEE 802.11n/b/g wireless network interface, transmission rates up to 300Mbps
WDS/Repeater for Extending Wireless Coverage
4ipWES (Press-n-Connect) with push button enables quick/auto WDS link
Creates structural WDS (Bridge or Repeater) links connecting to other WDS-capable APs
WDS links can serve as EAP200′s LAN connections to replace Ethernet ports, or simply bridge the wired side and the wireless side as a single network
Supporting QoS & 802.11e WMM
Supports IEEE 802.1p/IEEE 802.1Q Quality of Service (QoS) tagging features
Supports IEEE 802.11e Wireless Multi-Media to fulfill bandwidth thirsty triple-play (voice, audio and video) applications
Business-class WLAN Security & Client Authentications
Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key)
Wireless LAN segmentation, Disable SSID Broadcast and the option of station-isolation
Configuration-capable to filter out unauthorized wireless clients with build-in MAC-based access control list or via a back-end RADIUS server by sending an authentication request
Multiple Virtual APs & Capability of Client Isolation
One EAP200 can emulate up to 8 Virtual APs (VAP), each with its own ESSID; namely, one AP can have 8 ESSIDs.
Each VAP appears to clients as an independent AP and its traffic and be associated with a VLAN ID.
Supports client isolation, isolated from each other under one AP
Wall mountable Dust-proof Metal Housing
Enclosed in a metal housing, durable and non-fire hazard for the industrial environment
Dual-PoE with Link Failover
The IEEE 802.3af Power over Ethernet (PoE) compliant design eliminates the need for power sockets, allows installation of this device in areas where power outlets are not readily available to improve deployment flexibility, and provides standard based compatibility with other device
Provides dual-PoE 10/100 Fast Ethernet ports with failover function for redundant connectivity.
Cisco WRVS4400N WIFI Router with 4-Port Switch
Make the Linksys WRVS4400N the centre of your home or business network!
You'll be able to share broadband internet connections, send files, printers and more, as well as play multiplayer games, all with terrific speeds thanks to the WRVS4400N !
This WRVS4400N is compatible with the 802.11n standard and comes with a number of wireless and Virtual Private Network (VPN) security modes in addition to its SPI firewall, which will allow you to protect your system against attacks from outside.
More Details Technical specifications Peripheral type Wireless router
Standards 802.11b/g/n (Draft)
Transfer rate 300 Mbps
Frequency range 5 GHz
Routing protocols TCP/IP
Safety features IP access control list
SPI firewall
Content filtering
IPS (Intrusion Prevention System)
Management features SNMP version 1, 2c
Antenna 3
Dimensions 198 x 131 x 198 mm
Weight 0.55 kg
Contents WRVS4400N router, CD-ROM with user manual and QuickVPN software, network cable, power adapter, set-up guide
Cisco WAP200-EU Access Point with WIFI G/POE/MIMO
Your network's range will be doubled with this Linksys WAP200-EU wireless access point! The Linksys WAP200-EU boasts RangeBoost (MIMO) technology to take your network further. Its PoE mode lets you power it up via the Ethernet port, so you won't have to waste time searching for the nearest electrical outlet. The WAP200-EU also has an IDS system to detect intrusions and a wide selection of encryption features.
More Details Technical Specifications Norm IEEE 802.11b, IEEE 802.3af, IEEE 802.11g
Transfer Speed 108 Mbps
Encrypting WEP 64-Bit/128-Bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT
Antenna 2 detachable aerials
Ethernet Power over Ethernet
Size 170 x 205 x 195 mm
Weight 400g
Included Accessories 2 detachable aerials, CD-Rom, Ethernet cable, mains power supply, registration card.
Cisco WAP4410N Wireless-N Small Business Access Point – POE
The Cisco WAP4410N Small Business access point lets you hook up to your network using wireless 802.11n technology and improves your connection's range and reliability.
More Details General Device Type Radio access point
Width 17 cm
Depth 4.1 cm
Height 17 cm
Weight 390 g
Networking Form Factor External
Connectivity Technology Wireless
Data Transfer Rate 300 Mbps
Line Coding Format OFDM
Data Link Protocol IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft)
Spread Spectrum Method OFDM, DSSS
Network / Transport Protocol DHCP
Remote Management Protocol SNMP 1, SNMP 2c, HTTP, HTTPS
Frequency Band 2.4 GHz
Status Indicators Link activity, power, link OK
Features DHCP support, power over Ethernet (PoE), load balancing, VLAN support, Syslog support, E-mail alert, MAC address filtering, IPv6 support, firmware upgradable, MIMO technology, Wi-Fi Multimedia (WMM) support, event log, Quality of Service (QoS), RADIUS support, Wi-Fi Protected Setup (WPS)
Encryption Algorithm 128-bit WEP, 64-bit WEP, WPA, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise
Authentication Method Radio Service Set ID (SSID), Basic Service Set Identifier (BSSID)
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.1p, IEEE 802.11b, IEEE 802.3af, IEEE 802.11d, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11n (draft), Wi-Fi Protected Setup
Aerial Antenna External detachable
Antenna Qty 3
Directivity Omni-directional
Gain Level 2 dBi
Expansion / Connectivity Interfaces 1 x network / power – Ethernet 10Base-T/100Base-TX/1000Base-T – RJ-45
Miscellaneous Cables Included 1 x network cable
Compliant Standards CE, IC, FCC
Power Power Over Ethernet (PoE) Yes
Power Device Power adapter – external
Software / System Requirements OS Provided Linux
Environmental Parameters Min Operating Temperature 0 °C
Max Operating Temperature 40 °C
Humidity Range Operating 10 – 85%
Cisco SRP 521W Small Business Pro Wireless-N Router + 4-Port Switch
The Cisco SRP 521W is a wireless router that meets the network needs of small businesses.
Providing extremely fast transfer rates thanks to its wireless 802.11n connectivity, this Cisco SRP 521W Small Business Pro router features a built-in 4-port Ethernet switch to connect to up to 4 computers in your office.
Plus, when it comes to security, this SRP 521W Small Business Pro device has an integrated stateful packet inspection (SPI) firewall and high-speed VPN (Virtual Private Network) capabilities to help keep your data safe.
More Details General Device Type Wireless router
Form Factor External
Memory RAM 64 MB
Flash Memory 32 MB
Networking Connectivity Technology Wireless, wired
Integrated Switch 4-port switch
Data Link Protocol Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Switching Protocol Ethernet
Network / Transport Protocol TCP/IP, UDP/IP, L2TP, PPPoE
Routing Protocol RIP-1, RIP-2, IGMPv2, IGMP, static IP routing, IGMPv3, GRE
Remote Management Protocol SNMP 2, HTTP, HTTPS
Capacity IPSec VPN tunnels : 5
Status Indicators Port status, power
Features NAT support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), Syslog support, traffic shaping, Stateful Packet Inspection (SPI), DoS attack prevention, VPN passthrough, URL filtering, Low-latency queuing (LLQ), Weighted Fair Queuing (WFQ), Wi-Fi Multimedia (WMM) support, Access Control List (ACL) support, Quality of Service (QoS), Wi-Fi Protected Setup (WPS), DHCP server, wireless bridge mode
Compliant Standards IEEE 802.1Q, IEEE 802.11b, IEEE 802.11g, IEEE 802.11i, Wi-Fi CERTIFIED, IEEE 802.11n
IP Telephony VoIP Functionality VoIP phone adapter
VoIP Protocols SIP v2
Voice Codecs G.711, G.723.1, G.726
Telephony Interfaces 2 phone (FXS), 1 line (FXO)
IP Telephony Features Echo cancellation, comfort noise generation (CNG), voice activity detection (VAD), Caller ID, call waiting, call hold, call transfer, silence suppression, DTMF generation/detection
Aerial Aerial External integrated
Antenna Qty 1
Gain Level 2.2 dBi
Expansion / Connectivity Interfaces 4 x network – Ethernet 10Base-T/100Base-TX – RJ-45 ¦ 1 x network – Ethernet 10Base-T/100Base-TX – RJ-45 ( WAN ) ¦ 1 x phone line – FXO – RJ-11 ¦ 2 x phone line – FXS – RJ-11 ¦ 1 x Hi-Speed USB – 4 PIN USB Type A
Miscellaneous Cables (Details) 1 x network cable ¦ 1 x phone cable
Encryption Algorithm Triple DES, 128-bit WEP, 64-bit WEP, TKIP, WPA, WPA2
Authentication Method RADIUS, Radio Service Set ID (SSID)
Compliant Standards ETSI, CISPR 24, EN 61000-3-2, ICES-003, EN 61000-3-3, EN55024, CISPR 22, EN50082-1, AS/NZS 60950-1, RSS-210, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, FCC Part 15, CS-03, EN 61000-4-5, EN 61000-6-2, EN 61000-4-11, FCC CFR47 Part 15, EN300-386, EN 61000-4-8, UL 60950-1, IEC 60950-1, EN 60950-1
Power Power Device Power adapter – external
Voltage Required AC 120/230 V
Software / System Requirements Software Included Drivers & Utilities
Environmental Parameters Min Operating Temperature 0 °C
Max Operating Temperature 40 °C
Humidity Range Operating 5 – 95%
OWL500 Outdoor AP/WISP CPE/Bridge
The OWL510 built in with patch antenna is a 500mW Wi-Fi 802.11b/g device for long range wireless transmission. Its rugged IP68-rated metal housing is weatherproof, watertight and rust-resistant, making it an ideal solution for deployments in harsh conditions, such as outdoor or industrial environments. OWL510 supports multiple operation modes (AP/CPE/Bridge) and works well as a last-mile solution for wireless ISPs (WISPs).
More Details When operating in CPE (Client) mode, it functions as a Wi-Fi modem gateway to receive wireless signal over the last-mile Internet feed from WISPs. The CPE's bandwidth to the Internet can be assigned by the WISP. When in AP mode, OWL510 operates as an AP station with wall-penetrating high-power signal and long-range coverage to better serve Wi-Fi clients. In addition, it can be set up as a WDS-mesh node by establishing multiple WDS links to bridge neighbor access points together. Coming with business-class security, OWL510 in AP mode is also ideal for enterprise applications. Furthermore, one OWL510 with multiple SSIDs is capable of acting as multiple Virtual APs (VAPs). By tagging the traffic from each VAP with a unique VLAN ID, it allows for segmenting a corporate network using VLANs to protect critical resources. Being a versatile Wi-Fi device, OWL510 does not limit itself to outdoor usage only. When managed by a Controller (such as the WHG-series), it performs as a Wi-Fi base station in either a public or private wireless access deployment.
Features & Benefits
Rugged, Compact-Sized, and Adaptive to Versatile Environments
Diversified deployments:
Municipal Wi-Fi service
Home Ower Association (HOA), RV parks, and recreation resorts
Hotels, mobile hospitals, and mobile libraries
Shopping malls, airports, harbors, roadways, warehouse, and manufacturing plants
IP68 weather- and water-proof
Housed in durable, rust-resistant metal casing
High Transmit Power and Built-in Patch Antenna
Up to 500mW output power from the board to transmit stronger signals for longer range
Built-in patch antenna for installation convenience and efficiency
LED indicators to display wireless signal strength
High-speed with QoS for Voice, Video, and Data Applications
Equipped with a high-speed IEEE 802.11g wireless network interface based on Atheros™ chipset, transmit rates up to 54Mbps
Backward compatible with 802.11b
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty triple-play (voice, video, and data) applications
Power over Ethernet (PoE) & Flexible Mounting Options
PoE feature reduces the need of additional power cable to the device; a quality Power Supply Equipment (PSE) is bundled in the package
Wall and pole mountable; mounting kit included
Multiple Operation Modes for Different Infrastructures
Two administrator accounts – one for WISP to manage wireless broadband subscribers
Multiple operation modes:
CPE Mode – wireless modem with IP sharing
AP Mode – pure AP
WDS Mode – AP with wireless bridge
Universal Repeater Mode – with MAC NAT
Business-class Security and Multiple-SSID/ VLAN tagging Support
Full range of enterprise-grade wireless security mechanisms such as WEP, WPA and WPA2 (802.11i)
Multiple-SSID capability enables one OWL510 to behave like up to 8 unique Virtual APs (VAPs), the equivalent of 8 wireless Virtual LANs (VLANs) to securely segment wireless network traffic
Support client isolation in public hotspot operation.
OWL510 Outdoor AP/WISP CPE/Bridge
The OWL510 built in with patch antenna is a 500mW Wi-Fi 802.11b/g device for long range wireless transmission. Its rugged IP68-rated metal housing is weatherproof, watertight and rust-resistant, making it an ideal solution for deployments in harsh conditions, such as outdoor or industrial environments. OWL510 supports multiple operation modes (AP/CPE/Bridge) and works well as a last-mile solution for wireless ISPs (WISPs)
More Details When operating in CPE (Client) mode, it functions as a Wi-Fi modem gateway to receive wireless signal over the last-mile Internet feed from WISPs. The CPE's bandwidth to the Internet can be assigned by the WISP. When in AP mode, OWL510 operates as an AP station with wall-penetrating high-power signal and long-range coverage to better serve Wi-Fi clients. In addition, it can be set up as a WDS-mesh node by establishing multiple WDS links to bridge neighbor access points together. Coming with business-class security, OWL510 in AP mode is also ideal for enterprise applications. Furthermore, one OWL510 with multiple SSIDs is capable of acting as multiple Virtual APs (VAPs). By tagging the traffic from each VAP with a unique VLAN ID, it allows for segmenting a corporate network using VLANs to protect critical resources. Being a versatile Wi-Fi device, OWL510 does not limit itself to outdoor usage only. When managed by a Controller (such as the WHG-series), it performs as a Wi-Fi base station in either a public or private wireless access deployment.
Features & Benefits
Rugged, Compact-Sized, and Adaptive to Versatile Environments
Diversified deployments:
Municipal Wi-Fi service
Home Ower Association (HOA), RV parks, and recreation resorts
Hotels, mobile hospitals, and mobile libraries
Shopping malls, airports, harbors, roadways, warehouse, and manufacturing plants
IP68 weather- and water-proof
Housed in durable, rust-resistant metal casing
High Transmit Power and Built-in Patch Antenna
Up to 500mW output power from the board to transmit stronger signals for longer range
Built-in patch antenna for installation convenience and efficiency
LED indicators to display wireless signal strength
High-speed with QoS for Voice, Video, and Data Applications
Equipped with a high-speed IEEE 802.11g wireless network interface based on Atheros™ chipset, transmit rates up to 54Mbps
Backward compatible with 802.11b
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty triple-play (voice, video, and data) applications
Power over Ethernet (PoE) & Flexible Mounting Options
PoE feature reduces the need of additional power cable to the device; a quality Power Supply Equipment (PSE) is bundled in the package
Wall and pole mountable; mounting kit included
Multiple Operation Modes for Different Infrastructures
Two administrator accounts – one for WISP to manage wireless broadband subscribers
Multiple operation modes:
CPE Mode – wireless modem with IP sharing
AP Mode – pure AP
WDS Mode – AP with wireless bridge
Universal Repeater Mode – with MAC NAT
Business-class Security and Multiple-SSID/ VLAN tagging Support
Full range of enterprise-grade wireless security mechanisms such as WEP, WPA and WPA2 (802.11i)
Multiple-SSID capability enables one OWL510 to behave like up to 8 unique Virtual APs (VAPs), the equivalent of 8 wireless Virtual LANs (VLANs) to securely segment wireless network traffic
Support client isolation in public hotspot operation.
OWL800 Outdoor Mesh Access Point
Heavy Duty Design, Rugged Housing, Industrial-grade Components and Redundant Power over Ethernet Inputs. The OWL800 is a rugged access point specifically designed for building wireless networks in harsh outdoor or critical industrial environments. Its IP68 rated metal housing is weather-proof, water-tight and rust-resistant. Inside it contains industrial-grade components to allow for operation under extreme temperatures (-30~+70 oC) and provide surge immunity up to 15KV. Tolerant to vibration and wind, OWL800 is also ideal for installation at locations such as railways, bridges and windy harbors.
More Details 
Its dual Power over Ethernet (PoE) ports provides redundant power feeds to increase power supply availability. Hardware Flexibility for Networking and Multi-Radio, External Antenna Connectors. Hardware wise, a single OWL800 is capable of hosting 2-4 multiple radio modules simultaneously. Each module can be used for serving wireless clients, building wireless bridges, or establishing wireless backhauls. For some countries that permit high-power transmission, higher power modules are optionally available. There are 4 N-type antenna connectors extended from the modules on the OWL800 board, which not only gives the flexibility in choosing antennas but greatly simplifies the antenna installation. Software Flexibility for Networking.
Multi-Mode, Multi-Link. AP, Bridge/Mesh Node, Gateway. To support diversified wireless network architectures, the OWL800 provides multiple operating modes, including Point-to-Point Bridge, Point-to-Multipoint Bridge, AP station and AP Gateway. Unlike most of common access points that rely on a single radio for different purposes at one time, the OWL800 with multiple radio modules receives and transmits over-the-air signals for each bridge link or AP station with one dedicated wireless radio to prevent degraded performance.
Features & Benefits
Rugged for Outdoor or Harsh Environment
Weatherproof and watertight cast-metal housing with an IP68 rating
Surge immunity up to 15KV
Dual PoE for redundant power input and data link
Support multiple operation modes – Gateway mode, AP mode, and Relay mode
Multiple Radios and Antenna Connectors, Flexible for PtP, PtMP, or Mesh networks
Two built-in 802.11 a/b/g radio with two additional mini-PCI slots for expansion
High power radio modules are available options for countries where higher power transmitting is permitted
Low-loss N-type connectors allow for more flexible antenna choices for professionals
Antennas can be attached directly on the OWL800, or connected closely to OWL800, for reducing signal losses
Dual bands (2.4G and 5G) with more channels allow better channel planning to avoid interference
Each Radio module can be configured as AP or WDS independently. Up to four modules can be serving in one OWL800
Built-in AAA and User Management for Hotspot Operation
Support built-in Local accounts and On-demand accounts for user authentication
Support multiple external RADIUS servers for user authentication
Support UAM and IEEE802.1x access control functions
Built-in Hotspot access control and billing features
Robust and Reliable Wireless Link Construction
Dual PoE power input
Support 8 WDS links per 802.11a/b/g radio module
WDS discovery and link table for easy connect
Support VLAN tags over wireless inter-AP links (WDS) in addition to over the wireless links from clients to AP
Dynamic wireless link backup for network reliability
Dedicated WDS radios could form a mesh WLAN without taking away some bandwidth for serving clients
Wireless Security and QoS Support
Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or Pre-Shared Key
Support encryption, including WEP, AES, or TKIP, over wireless inter-AP links (WDS)
Wireless LAN segmentation, Disable SSID Broadcast
Support client-isolation so that clients are isolated from each other under one AP
Support QoS tags over wireless inter-AP links (WDS)
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty multimedia applications such as voice, audio and video
Excellent Solution for Community WLAN
Each AP module is capable of emulating up to 8 virtual APs (VAPs) simultaneously
With the capabilities of multiple-SSID and VLAN tag association, OWL800 allows equipment-sharing among different franchises; moreover, its QoS feature enables differentiated service operations
Multiple OWL800′s can be managed under an external WLAN controller to form a managed WLAN solution.
OWL400 Outdoor AP/Bridge/CPE
The OWL400 is a 200mW Wi-Fi 802.11n/a device for long range wireless transmission. Its rugged IP68-rated metal housing is weatherproof, watertight and rust-resistant, making it an ideal solution for deployments in harsh conditions, such as outdoor or industrial environments.
More Details OWL400 supports multiple operation modes (AP/Bridge/CPE) and works well as a last-mile solution for wireless ISPs (WISPs). When in AP mode , OWL400 operates as an AP station with wall-penetrating high-power signal and long-range coverage to better serve Wi-Fi clients. In addition, it can be set up as a WDS node by establishing multiple WDS links to bridge neighbor access points together.
Coming with business-class security, OWL400 in AP mode is also ideal for enterprise applications. Furthermore, one OWL400 with multiple SSIDs is capable of acting as multiple Virtual APs (VAPs). By tagging the traffic from each VAP with a unique VLAN ID, it allows for segmenting a corporate network using VLANs to protect critical resources.
When operating in CPE (Client) mode , it functions as a Wi-Fi modem gateway to receive wireless signal over the last-mile Internet feed from WISPs. The CPE's bandwidth to the Internet can be assigned by the WISP.
Being a versatile Wi-Fi device, OWL400 does not limit itself to outdoor usage only. When managed by a Controller (such as the WHG-series), it performs as a Wi-Fi base station in either a public or private wireless access deployment.
Rugged, Compact-Sized, and Adaptive to Versatile Environments
Diversified deployments:
Municipal Wi-Fi service
Home Owner Association (HOA), RV parks, and recreation resorts
Hotels, mobile hospitals, and mobile libraries
Shopping malls, airports, harbors, roadways, warehouse, and manufacturing plants
IP68 weather- and water-proof, housed in durable, rust-resistant metal casing
High Transmit Power and N-type Connector
Up to 200mW output power from the board to transmit stronger signals for longer range
N-type connector allows for choosing suitable antenna types and gains with flexibility
High-speed with QoS for Voice, Video, and Data Applications
Equipped with a high-speed IEEE 802.11n/a chipset, supporting transmit rate up to 300Mbps
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty triple-play (voice, video, and data) applications
Power over Ethernet (PoE) & Flexible Mounting Options
PoE feature reduces the need of additional power cable to the device; a quality Power Supply Equipment (PSE) is bundled in the package
Wall and pole mountable; mounting kit included
Multiple Operation Modes for Different Infrastructures
Two administrator accounts – one for WISP to manage wireless broadband one for subscribers
Multiple operation modes:
AP Mode – pure AP
WDS Mode – AP with wireless bridge
Universal Repeater Mode – with MAC NAT
CPE Mode – wireless modem with IP sharing
Business-class Security and Multiple-SSID/ VLAN tagging Support
Full range of enterprise-grade wireless security mechanisms such as WEP, WPA and WPA2 (802.11i)
Multiple-SSID capability enables one OWL400 to behave like up to 7 unique APs, the equivalent of 7 wireless Virtual LANs (VLANs) to securely segment wireless network traffic
Support client isolation in public hotspot operation
CPE100 Outdoor CPE/Compact AP/Bridge
The 802.11 b/g compliant CPE100 is a multi-mode Last-Mile Broadband solution for Wireless ISP (WISPs). It can be used as an Outdoor Customer Premises Equipment (CPE mode) to receive wireless signal over the last mile, helping WISPs deliver wireless broadband Internet service to new residential and business customers, where wired broadband Internet service, such as cable and DSL, cannot serve. In addition, it can be deployed as a traditional fixed wireless Access Point (AP mode), either indoors or outdoors.
More Details The IP68-rated metal sealed CPE100 is compact in size and weatherproof. Coming with a mounting kit, it can be mounted on a pole or wall. It is suitable for both indoor and outdoor usage with its 200mW output power.
The CPE 100 can be deployed in various environments, for example:
- Outdoor access point for school campuses, enterprise campuses, or manufacture plants.
- Wireless CPE for MDU/ MTU, such as apartments, dormitories, and office complexes.
- Indoor access point for hotels, factories, or warehouses where metal industrial grade devices are preferred.
- Public hotspot operation for café, parks, convention centers, shopping malls, or airports.
- Wireless coverage for both indoor and outdoor ground for private resorts, acre estate/home's yards, or golf course communities.
A WISP Deployment Example
Acts as a “Wireless Modem” to bring wireless bandwidth to home and office buildings.
Wireless Bandwidth Allocation (uplink/downlink) delivered to each building depending on different subscription plans.
Full range of wireless security mechanisms such as WEP, WPA and WPA2 (802.11i) that are important for enterprise wireless deployments.
Acts as a Home Router for IP Sharing and firewall, all-in-one installation solution.
Weatherproof and watertight from its rugged aluminum housing (IP68 Approved).
Power over Ethernet (PoE) built-in for single cable installation.
On board Ethernet surge protection.
Multi-mode Support:
CPE Mode
AP Mode
WDS Mode
Universal Repeater (Bridge) Mode
CPE110 WISP Outdoor CPE/AP/Bridge
The 802.11 b/g compliant CPE110 is a multi-mode Last-Mile Broadband solution for Wireless ISP (WISPs). It can be used as an Outdoor Customer Premises Equipment (CPE mode) to receive wireless signal over the last mile, helping WISPs deliver wireless broadband Internet service to new residential and business customers, where wired broadband Internet service, such as cable and DSL, cannot serve. In addition, it can be deployed as a traditional fixed wireless Access Point (AP mode), either indoors or outdoors.
More Details The IP68-rated metal sealed CPE110 is compact in size and weatherproof. Coming with a mounting kit, it can be mounted on a pole or wall. It is suitable for both indoor and outdoor usage with its 200mW output power.
The CPE 100 can be deployed in various environments, for example:
- Outdoor access point for school campuses, enterprise campuses, or manufacture plants.
- Wireless CPE for MDU/ MTU, such as apartments, dormitories, and office complexes.
- Indoor access point for hotels, factories, or warehouses where metal industrial grade devices are preferred.
- Public hotspot operation for café, parks, convention centers, shopping malls, or airports.
- Wireless coverage for both indoor and outdoor ground for private resorts, acre estate/home's yards, or golf course communities.
A WISP Deployment Example
Acts as a “Wireless Modem” to bring wireless bandwidth to home and office buildings.
Wireless Bandwidth Allocation (uplink/downlink) delivered to each building depending on different subscription plans.
Full range of wireless security mechanisms such as WEP, WPA and WPA2 (802.11i) that are important for enterprise wireless deployments.
Acts as a Home Router for IP Sharing and firewall, all-in-one installation solution.
Weatherproof and watertight from its rugged aluminum housing (IP68 Approved).
Power over Ethernet (PoE) built-in for single cable installation.
On board Ethernet surge protection.
Multi-mode Support:
CPE Mode
AP Mode
WDS Mode
Universal Repeater (Bridge) Mode
Belkin Ethernet CPL F5D4079UK Adapter Kit (Set of 2)
The convenient and easy to use Ethernet CPL F5D4079UK adapter kit uses any standard electrical outlet to expand your network.
What's more, the F5D4079UK kit's HomePlug AV system gives you a data transfer rate of 200 Mbps!
More Details | 네트워킹 | Connectivity Technology | Wired |
|---|---|---|
| Data Transfer Rate | 200 Mbps | |
| Data Link Protocol | Ethernet, Fast Ethernet, HomePlug AV (HPAV) | |
| Status Indicators | Port status, power, status | |
| Compliant Standards | IEEE 802.3, HomePlug AV | |
| Expansion / Connectivity | Interfaces | 1 x network – Ethernet 100Base-TX – RJ-45 ¦ 1 x network / power – HomePlug AV |
| 여러 가지 잡다한 | Cables Included | Network cable |
| Encryption Algorithm | 128-bit AES | |
| 권력 | 전원 장치 | Power supply – internal |
| 소프트웨어 / 시스템 요구 사항 | 소프트웨어 포함 | 드라이버 및 유틸리티 |
| 인터페이스 / 주변 기기 | CD-ROM | |
| 환경 매개 변수 | Min Operating Temperature | 0 °C |
| Max Operating Temperature | 40 °C | |
| Humidity Range Operating | 10 – 90% (non-condensing) |
Cisco SLM224P 24-Port 10/100 MBPS Small Business Switch With 2 Gigabit/Mini-GBIC Ports – POE
The SLM224P Small Business switch from Cisco is an easy-to-use and totally secure switch that allows you to connect up to 24 network devices, including printers, computers and servers, to share and transfer files and videos over your network.
Plus, it prevents unauthorised users from accessing the network for total security.
More Details | 일반 | Device Type | 스위치 |
|---|---|---|
| Enclosure Type | External – 1U | |
| Built-in Devices | Led panel | |
| Width | 44 cm | |
| Depth | 25.7 cm | |
| 고도 | 4.3 cm | |
| 무게 | 3.3 kg | |
| 네트워킹 | Ports Qty | 24 x Ethernet 10Base-T, Ethernet 100Base-TX |
| Auxiliary Network Ports | 2×10/100/1000Base-T/SFP (mini-GBIC)(uplink) | |
| Data Transfer Rate | 100 Mbps | |
| Data Link Protocol | Ethernet, Fast Ethernet | |
| Remote Management Protocol | HTTP | |
| Connectivity Technology | Wired | |
| Switching Protocol | 이더넷 | |
| MAC Address Table Size | 8K entries | |
| Status Indicators | Link activity, port transmission speed, link OK, system | |
| 특징 | Flow control, Layer 2 switching, auto-sensing per device, DHCP support, power over Ethernet (PoE), auto-negotiation, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, port mirroring, Weighted Round Robin (WRR) queuing, store and forward, MAC address filtering, Broadcast Storm Control, IPv6 support, Quality of Service (QoS) | |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1x | |
| Expansion / Connectivity | Expansion Slots Total (Free) | 2 ( 2 ) x SFP (mini-GBIC) |
| Interfaces | 12 x network / power – Ethernet 10Base-T/100Base-TX – RJ-45 ¦ 2 x network host – Ethernet 10Base-T/100Base-TX/1000Base-T – RJ-45 female ¦ 12 x network node – Ethernet 10Base-T/100Base-TX – RJ-45 female | |
| 여러 가지 잡다한 | Rack Mounting Kit | Included |
| Encryption Algorithm | MD5 | |
| Authentication Method | RADIUS | |
| Compliant Standards | CE, UL, cUL, CB, FCC Part 15 A | |
| 권력 | Power Over Ethernet (PoE) | 예 |
| 전원 장치 | Power supply – internal | |
| Voltage Required | AC 120/230 V | |
| Manufacturer Warranty | Service & Support | 5 years warranty |
| Service & Support Details | Limited warranty – 5 years | |
| 환경 매개 변수 | Min Operating Temperature | 0 °C |
| Max Operating Temperature | 50 °C | |
| Humidity Range Operating | 10 – 90% |
Cisco SLM224G Small Business 24-Port 10/100 MBPS Switch With 2 Gigabit / Mini-GBIC Ports
The Small Business SLM224G switch from Cisco is an easy-to-use and totally secure switch that allows you to connect up to 24 network devices, including printers, computers and servers, to share and transfer files and videos over your network.
Plus, it prevents unauthorised users from accessing the network for total security.
More Details | 일반 | Device Type | 스위치 |
|---|---|---|
| Enclosure Type | External – 1U | |
| Built-in Devices | Led panel | |
| Width | 44 cm | |
| Depth | 25.7 cm | |
| 고도 | 4.3 cm | |
| 무게 | 2.9 kg | |
| 네트워킹 | Ports Qty | 24 x Ethernet 10Base-T, Ethernet 100Base-TX |
| Auxiliary Network Ports | 2×10/100/1000Base-T/SFP (mini-GBIC)(uplink) | |
| Data Transfer Rate | 100 Mbps | |
| Data Link Protocol | Ethernet, Fast Ethernet | |
| Remote Management Protocol | HTTP | |
| Connectivity Technology | Wired | |
| Switching Protocol | 이더넷 | |
| MAC Address Table Size | 8K entries | |
| Status Indicators | Link activity, port transmission speed, link OK, system | |
| 특징 | Flow control, Layer 2 switching, auto-sensing per device, DHCP support, auto-negotiation, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, port mirroring, Weighted Round Robin (WRR) queuing, store and forward, MAC address filtering, Broadcast Storm Control, Quality of Service (QoS) | |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1x | |
| Expansion / Connectivity | Expansion Slots Total (Free) | 2 ( 2 ) x SFP (mini-GBIC) |
| Interfaces | 2 x network host – Ethernet 10Base-T/100Base-TX/1000Base-T – RJ-45 ¦ 24 x network node – Ethernet 10Base-T/100Base-TX – RJ-45 | |
| 여러 가지 잡다한 | Rack Mounting Kit | Included |
| Encryption Algorithm | MD5 | |
| Authentication Method | RADIUS | |
| Compliant Standards | CE, UL, cUL, CB, FCC Part 15 A | |
| 권력 | 전원 장치 | Power supply – internal |
| Voltage Required | AC 120/230 V | |
| 환경 매개 변수 | Min Operating Temperature | 0 °C |
| Max Operating Temperature | 50 °C | |
| Humidity Range Operating | 10 – 90% |
Saorview는 고화질 디지털 지상파 수신기를 승인
SAORVIEW is Ireland's digital terrestrial television (DTT) service. The signal is broadcast from transmission masts across the country with over 90% coverage. SAORVIEW is received through a standard TV aerial paired with a SAORVIEW approved set top box.
SAORVIEW approval ensures that the set top box is totally compatible with the Digital TV service. Most UK free view boxes are not compatible. It brings you all your favourite Irish channels, crystal-clear pictures, better quality sound, on-screen programme menus and digital teletext – all for free. Enjoy perfect digital TV reception of RTE1, RTE2 HD, TV3, TG4, RTE News Now, 3e, RTE jr, RTE1 +1, RTE Aertel in high definition.
- PVR Functions (recording, playback via USB)
- Favourite Channel List
- MPEG-4
- Remote Control
- HDMI Cable
제품 특징
- PVR Functions (recording, playback via USB)
- Favourite Channel List
- MPEG-4
- Remote Control
- HDMI Cable
Technical Details
- Full Digital Text
- 7 Day Electronic Programme Guide
- Reminder Setting
- Multi Language On Screen Display
- 자막
More Details > Free to View HD Digital TV
> 780p /1080i Resolutions
> Digital Radio and Data Channels
> Automatic Channel Search
> HDMI Output
> Single Scart Socket
> Connects to existing aerial system and TV
모든 SV 9,352 야외 디지털 TV 안테나에 대한 한
With its output of 24 dB, the SV 9352 outdoor antenna from One For All receives analogue and digital signals, even in areas with poor reception.
The HD Ready 9352 SV antenna lets you get the most out of digital television. The antenna has a highly resistant waterproof casing and a high-performance integrated circuit.
Easy to install thanks to its fitting kit and its components riveted already mounted, The SV 9352 antenna from One For All comes with all required connectors and is easy to install thanks to its mounting kit and its pre-mounted reflectors and directors.
More Details Description: Outdoor antenna
Frequency range: Digital terrestrial TV
Coverage: 24 dB
Dimensions
Height: 75 cm
Width: 54 cm
Depth: 128.2 cm
Weight With packaging: 3 kg
Content Mounting kit, connectors and coaxial cable
Updating… 
