Funkcje

1.Actual osiągalny zakres badań do 50 km
Przepustowość do 40Mbps 2.High
3.Support Bridge (PTP, PTMP)
4.High bezpieczeństwo (AES)
5.Ease instalacji (prawdziwy test link czas RSSI lokalnym i zdalnym)
6.Transmit Power Control
7.Bandwidth Control (40/20/10/5 MHz)
8.Wireless TDMA (TDD Mode)
9.VLAN Pass-through
10.IP67 Znamionowy Wodoodporna metalowa zewnętrzna obudowa projektowanie Vent

Specyfikacja

Bezprzewodowy
Standardowy Proprietary
Pasmo częstotliwości 5120 ~ 6060MHz
Modulacja 64QAM 3/4, 64QAM 2/3, 16QAM 3/4, 16QAM 1/2, QPSK 3/4, QPSK 1/2, BPSK 3/4, BPSK 1/2
Przepustowość do 40Mbps w ciągu 50 km
Przepustowość kanału 5/10/20 MHz
Bezpieczeństwo WEP / AES
Czułość -92 dBm
Moc wyjściowa 23dBm
Transmit Power Control 5 poziomów
Tryb pracy Bridge (PTP, PTMP)

Cechy Oprogramowanie DFS

Test Tool Link (Real Time Lokalne i zdalne RSSI)
Spanning Tree (STP)
802.1Q VLAN przechodzą przez
Klient NTP

Zarządzanie

Web-Based Management
Zdalne aktualizacji firmware
Obsługa SNMP V2 (Private MIB, 802,11 MIB)
CLI
Kopia zapasowa / Przywracanie
System Log
Remote Server Zaloguj
Watch Dog Hardware

Sprzęt

Procesor Intel IXP422 266MHz Atheros2414
Flash 16MB SDRAM 32MB
Moc Wskazanie LED, Ethernet, Wireless, RSSI (5 diod)
Złącze antenowe 1 x złącze Ntype

Ethernet

10/100BASE-TX auto-negocjacja port Ethernet x 1 (złącze RJ-45)
Auto MDI / MDI-X aktywna, Power Over Ethernet Kompatybilny IEEE802.3af

Środowisko

Temperatura pracy: -30 ° C ~ 80 ° C
Temperatura przechowywania: od -30 ° C ~ 85 ° C
Wilgotność: 100% (bez kondensacji)
Zasilanie 802.3af PoE, 48V 0.35A
Wodoodporny
IP67 certyfikowany
Montaż ścienny, do montażu na maszcie, opcjonalnie Góra Polak do Polaka Światła
Wymiary 259 (L) x 250 (szer.) x 75 (wys.) mm

Funkcje

1.Actual osiągalny zakres badań do 50 km
Przepustowość do 40Mbps 2.High
3.Support Bridge (PTP, PTMP)
4.High bezpieczeństwo (AES)
5.Ease instalacji (prawdziwy test link czas RSSI lokalnym i zdalnym)
6.Transmit Power Control
7.Bandwidth sterowania (5/10/20 MHz)
8.Wireless TDMA (TDD Mode)
9.VLAN Pass-through
10.IP67 Znamionowy Wodoodporna metalowa zewnętrzna obudowa projektowanie Vent

Specyfikacja

Bezprzewodowy
Standardowy Proprietary
Pasmo częstotliwości 2.412-2472MHz
Modulacja 64QAM 3/4, 64QAM 2/3, 16QAM 3/4, 16QAM 1/2, QPSK 3/4, QPSK 1/2, BPSK 3/4, BPSK 1/2
Przepustowość do 40Mbps w ciągu 50 km
Przepustowość kanału 5/10/20 MHz
Bezpieczeństwo WEP / AES
Czułość -92 dBm
Moc wyjściowa 23dBm
Transmit Power Control 5 poziomów
Tryb pracy Bridge (PTP, PTMP)

Cechy Oprogramowanie DFS

Test Tool Link (Real Time Lokalne i zdalne RSSI)
Spanning Tree (STP)
802.1Q VLAN przechodzą przez
Klient NTP

Zarządzanie

Web-Based Management
Zdalne aktualizacji firmware
Obsługa SNMP V2 (Private MIB, 802,11 MIB)
CLI
Kopia zapasowa / Przywracanie
System Log
Remote Server Zaloguj
Watch Dog Hardware

Sprzęt

Procesor Intel IXP422 266MHz Atheros2414
Flash 16MB SDRAM 32MB
Moc Wskazanie LED, Ethernet, Wireless, RSSI (5 diod)
Złącze antenowe 1 x złącze Ntype

Ethernet

10/100BASE-TX auto-negocjacja port Ethernet x 1 (złącze RJ-45)
Auto MDI / MDI-X aktywna, Power Over Ethernet Kompatybilny IEEE802.3af

Środowisko

Temperatura pracy: -30 ° C ~ 80 ° C
Temperatura przechowywania: od -30 ° C ~ 85 ° C
Wilgotność: 100% (bez kondensacji)
Zasilanie 802.3af PoE, 48V 0.35A
Wodoodporny
IP67 certyfikowany
Montaż ścienny, do montażu na maszcie, opcjonalnie Góra Polak do Polaka Światła
Wymiary 259 (L) x 250 (szer.) x 75 (wys.) mm

Parametry elektryczne
MODEL KC16T
Maksymalna moc 16W
Tolerancja +15% / -5%
Maksymalna 17.4V Napięcie zasilania
Maksymalna moc prądu 0.93A
Otwarty obwód napięcia 21.7V
Prądu zwarcia 1.00A
Wymiary 517 x 280 x 17 mm
Masa 1,6 kg

Parametry elektryczne
MODEL KC21T
Maksymalna moc 21W
Tolerancja +15% / -5%
Maksymalna 17.4V Napięcie zasilania
Maksymalna moc prądu 1.21A
Otwarty obwód napięcia 21.7V
Prądu zwarcia 1.30A
Wymiary 367 x 512 x 17 mm
Masa +2,0 kg

Efficiency %: 15
Size (L x W x H) (mm): 512 X 517 X 17
Weight (kg): 2.8
Max. Out Power (Watt): 32
Max. Power Voltage (VmpV): 17,4
Max. Power Current (Imp A): 1,84
Open circuit voltage (Voc V): 21,7
Short Circuit Current (ISC A): 1,99

Efficiency%: 15
Size (L x W x H) (mm): 652 X 639 X 54
Weight (kg): 5,0
Max. Out Power (Watt): 54
Max. Power Voltage (VmpV): 17,4
Max. Power Current (Imp A): 3,11
Open circuit voltage (Voc V): 21,7
Short Circuit Current (ISC A): 3,31

ELECTRICAL PERFORMANCE
PV Module Type KC65GX-2P
At 1000 W/m² (STC)*
Maximum Power [W] 65
Maximum System Voltage [V] 750
Maximum Power Voltage [V] 17.4
Maximum Power Current [A] 3.75
Open Circuit Voltage (VOC ) [V] 21.7
Short Circuit Current (ISC) [A] 3.99
DIMENSIONS 751 x 652 x 36mm
WEIGHT 6KG

ELECTRICAL PERFORMANCE
PV Module Type KC85
At 1000 W/m² (STC)*
Maximum Power [W] 85
Maximum System Voltage [V] 750
Maximum Power Voltage [V] 17.4
Maximum Power Current [A] 5.02
Open Circuit Voltage (VOC ) [V] 21.7
Short Circuit Current (ISC) [A] 5.34
DIMENSIONS 1007 x 652 x 36mm
WEIGHT 8.3KG

Parametry elektryczne
PV Moduł Typ KC135
W 1000 W / m² (STC) *
Moc maksymalna [W] 135
Maksymalne napięcie systemu [V] 1000
Maksymalne napięcie zasilania [V] 23,6
Maksymalna moc prądu [A] 6,26
Napięcia jałowego (LZO) [V] 26,5
Prąd zwarciowy (ISC) [A] 6,98
WYMIARY 1338 x 990 x 46mm
WAGA 16kg

Parametry elektryczne
PV moduł typu KD210
W 1000 W / m² (STC) *
Moc maksymalna [W] 210
Maksymalne napięcie systemu [V] 1000
Maksymalne napięcie zasilania [V] 26,6
Maksymalna moc prądu [A] 7,9
Napięcia jałowego (LZO) [V] 33,2
Prąd zwarciowy (ISC) [A] 8,58
WYMIARY 1500 x 990 x 46mm
WAGA 18kg

Parametry elektryczne
PV moduł typu KD70
W 1000 W / m² (STC) *
Moc maksymalna [W] 70
Maksymalne napięcie systemu [V] 750
Maksymalne napięcie zasilania [V] 17,9
Maksymalna moc prądu [A] 3,13
Napięcia jałowego (LZO) [V] 22,1
Prąd zwarciowy (ISC) [A] 4,3
WYMIARY 778 x 660 x 44mm
6.5kg WAGA

Parametry elektryczne
PV moduł typu KD95
W 1000 W / m² (STC) *
Moc maksymalna [W] 95
Maksymalne napięcie systemu [V] 750
Maksymalne napięcie zasilania [V] 17,9
Maksymalna moc prądu [A] 5,31
Napięcia jałowego (LZO) [V] 22,1
Prąd zwarciowy (ISC) [A] 5,81
WYMIARY 1043 x 660 x 44mm
8.5kg WAGA

HSG1200 jest również idealny do zastosowania hotelarskiej. Na przykład, hotelu mogą korzystać z funkcji strefy usług w celu oddzielenia przywilejów pracowników, gości i użytkowania VIP dostępu do Internetu.

W HSG1200 wbudowany na żądanie możliwość generacji konto jest łatwy w użyciu przez kasjerów i recepcjonistki. Każde konto gość jest związany z ceną i kontyngentu użytkowania, albo czasu lub pojemności. Ponadto HSG1200 współpracuje z istniejącego serwera RADIUS, jeśli centralny rozliczeń zostały wdrożone przez operatora.

Prosta instalacja i obsługa

• Obsługuje różne opcje wdrażania szerokopasmowych (T1, DSL, Cable) za pośrednictwem statycznego IP, DHCP PPPoE oraz PPTP
• Wbudowana baza użytkowników zapewnia wystarczającą pojemność konta dla różnych scenariuszy pracy
• Współpracuje z natychmiastowym generatora konta w celu zapewnienia kont dla odwiedzających bazie, na żądanie operacji
• Równoważenie obciążenia i WAN failover zwiększyć wykorzystanie pasma i zapewnia bardziej niezawodne połączenie z Internetem

Zintegrowane funkcje zabezpieczeń

• Standardowy bazie danych uwierzytelniania i szyfrowania użytkownik: SSL, IEEE 802.1X, WPA-RADIUS
• Bezpieczne Gości i dostęp administrator używając internetowy login i administracji w SSL
• Konfigurowalne polityki filtrowania pakietów zwiększy bezpieczeństwo ruchu danych
• Wbudowany DoS ochrona zapobiega hakerzy z zawaleniem sieci

Efektywne zarządzanie użytkownikami

• Kompletne blokuje mechanizm uwierzytelniania użytkowników nieuwierzytelnionych z dostępem zyskuje do sieci
• Oparte na rolach i oparte na regułach polityki kontroli zwiększenia ochrony przed złośliwymi użytkownikami
• "On-line lista użytkowników" monitoruje w czasie rzeczywistym status każdego użytkownika
• Umożliwia kontrolę wygasania sesji dla użytkowników na żądanie objętościowo czasu i danych

Elastyczne Rachunkowość i płatności

• Programowalne profile bilingowe pozwalają operatorom na dostosowanie planów billingowych dla użytkowników na żądanie
• Kontrola przepustowości pozwala na klasę usług dla różnych poziomów użytkowników i maksymalizacji zysków
• RADIUS VSA (sprzedawca Konkretne atrybuty) realizacja dodaje elastyczności do kontroli księgowej i sesja z wykorzystaniem serwera RADIUS
• Szczegółowy per-user log historia ruchu dla analiz i statystyki
• Raport rozliczeniowy daje podsumowanie zapisów transakcji dla użytkowników na żądanie

Sieć

• Obsługuje Router, NAT mode
• Obsługuje statyczne IP, DHCP, PPPoE, PPTP Modem
• Obsługa IP Plug and Play (PnP IP)
• Wbudowany serwer DHCP oraz wsparcie dla DHCP Relay
• Obsługa NAT:
• IP / port docelowy przekierowania
• Mapowanie serwera DMZ
• Wirtualny Mapowanie serwera
• Konfigurowalny trasa statyczna
• Obsługuje usługę e-mail za pośrednictwem wyznaczonego serwera e-mail
• Obsługuje ogrodem
• Walled Lista Reklama ogród pozwala linków do stron reklamowych na stronę logowania portalu
• Obsługa MAC Address Pass-Through
• Obsługuje HTTP Proxy
• Obsługuje połączenia Ethernet z zewnętrznymi serwerami terminali
• Obsługują podwójne łączy nadrzędnych wychodzących równoważenie obciążenia i przełączania awaryjnego dla bardziej niezawodnego połączenia z Internetem
• Wsparcie SIP pass-through NAT

Bezpieczeństwo

• Obsługa zabezpieczeń normy: SSL, IEEE 802.1X, WPA-RADIUS
• Obsługa VPN Pass-Through (IPSec i PPTP)
• Wbudowana ochrona przed atakami DoS
• Obsługuje site-to-site tunel VPN
• Obsługuje Listę Kontroli Dostępu MAC
• Konfigurowane przez użytkownika Czarna lista
• Pozwala na adres MAC i wiążące tożsamości użytkownika dla uwierzytelniania lokalnego użytkownika

Strefy serwisowe

• Sieć jest podzielona na maksymalnie 9 stref usług, każdy zdefiniowany przez znacznik VLAN
• Każda strefa ma swój serwis
• stronę logowania portalu
• opcje uwierzytelniania
• LAN adres IP interfejsu
• Zakres adresów DHCP
• Każda strefa usługa umożliwia dostęp do wybranych grup
• Każda strefa usług przypisuje politykę sieciowy do każdej grupy użytkowników

Zarządzanie użytkownikami

• Obsługuje 3000 kont lokalnych
• Obsługuje 2.000 kont na żądanie
• Jednoczesna obsługa wielu metod uwierzytelniania (lokalne i kont na żądanie, POP3, LDAP, RADIUS NT Domain)
• Policy-Based Access Control (per-rola zadania, opartą na zasadach Firewall, Routing, Plan Logowania przepustowości, kwot, jak sesji)

1. Zarządzanie sesjami użytkownika:
2. SSL chronione strona portal logowania
3. Obsługa wielu loginów przy jednym koncie
4. Sesja czasie bezczynności
5. Sesja i kontrola ważności konta
6. Powiadomienie e-mail, aby zapewnić hiperłącze do strony logowania
7. Wspiera Single Sign-On dla Windows Domain
8. Zaloguj kontrolę ramy czasowe
9. Limit Session

Rachunkowość i płatności

• Zapewnia plany rozliczeniowe dla kont na żądanie
• Umożliwia kontrolę wygasania sesji dla kont na żądanie przez czas (godzina) i objętości danych (MB)
• Szczegółowy per-user Historia Ruchu na podstawie ilości czasu i danych dla kont lokalnych i na żądanie
• Raport historia Ruchu w automatycznym e-mail do administratora
• Obsługa RADIUS VSA (konkretnych producentów Atrybuty) wdrażanie rachunkowości ruchu i kontroli sesji
• Obsługa płatności kartą kredytową za pośrednictwem zewnętrznych płatności bram w Authorize.Net, PayPal, SecurePay, WorldPay)

System Administration

• Zarządzanie web UI
• Konfigurowalny logowania i wylogowania portalu stronę
• Wsparcie dla SNMP v1, v2c
• SSH zdalne zarządzanie
• Zdalna aktualizacja oprogramowania
• Synchronizacja czasu NTP
• Zapewnia interfejs konsoli zarządzania
• Narzędzia do tworzenia kopii zapasowych i przywracanie konfiguracji systemu

Monitorowanie i raportowanie

• Online monitorowanie stanu użytkowników
• IP-based monitoring urządzeń
• WAN alert błąd połączenia
• Obsługuje zewnętrzny serwer Syslog do diagnostyki i rozwiązywania problemów
• Obsługa ruchu logowania użytkownika historii
• Obsługa sesji ruchu użytkownika (TCP / UDP) rejestrowanie
• Obsługa lokalnego użytkownika comiesięczny raport o użytkowaniu

Physical and Power

• Zasilacz: 100 ~ 240 VAC, 50/60 Hz
• Form Factor: 19 "1U Rack Mount
• Wymiary (szer. x głęb. x wys.): 16,9 "x 6,1" x 1,7 "(430 mm x 155 mm x 43 mm)
• Waga: 3.3 lbs (1.5 kg)

Specyfikacja sprzętowa

• Porty WAN: 2 x 10/100Base-TX RJ-45
• LAN Porty: 4 x 10/100Base-TX RJ-45
• Port konsoli: 1 x RS-232 DB9
• Wskaźniki LED: 1 x zasilanie, 1 Stan, 2 x WAN, 4 x LAN

Środowisko

• Temperatura pracy: 0 ~ 40 ° C
• Temperatura przechowywania: -20 ~ 65 ° C

Certyfikaty

• CE, FCC
• RoHS

Zawartość opakowania

• HS1200 x 1
• CD-ROM (Instrukcja użytkownika i QIG) x 1
• Instrukcja szybkiej instalacji (QIG) x 1
• Konsola Kabel x 1
• Kabel Ethernet x 1
• Prosta x kabel Ethernet 1
• Zasilacz (12V) z kablem zasilającym x 1
• Rack Uchwyt montażowy (ze śrubami) x 1

HSG3200 is also ideal for hospitality application. For example, a hotel can use the service zone feature to separate the privileges of staff, guest, VIP, and convention usage for accessing Internet.

The HSG3200′s built-in on-demand account generation capability is easy to use by cashiers or receptionists. Each guest account is associated to a price and a usage quota, either by time or volume. Moreover, HSG3200 works with the existing RADIUS server, if central billing had been implemented by the operator.

Cechy i zalety

Easy Installation and Operation

Supports various broadband deployment options (T1, DSL, Cable) via static IP, DHCP, PPPoE, and PPTP
Built-in user database provides sufficient account capacity for different operation scenarios
Works with instant account generator to provide user accounts for visitor-based, on-demand operations
Load balancing and WAN failover enhance bandwidth utilization and provide more reliable Internet connection
Zintegrowane funkcje zabezpieczeń

Standards-based data encryption and user authentication: SSL, IEEE 802.1x, WPA-RADIUS
Secure guest and administrator access using web-based login and administration over SSL
Configurable packet filtering policies enhance data traffic security
Built-in DoS protection prevents malicious hackers from collapsing the network
Effective User Management

Complete authentication mechanism blocks unauthenticated users from gaining access to the network
Role-based and policy-based control policies enhances the protection against malicious users
“On-line user list” monitors real-time status of each individual user
Allows session expiration control for On-demand users by time and data volume
Flexible Accounting and Billing

Programmable billing profiles allow operators to customize the billing plans for On-demand users
Bandwidth control enables class of service for different levels of users and maximize profits
4ipnet RADIUS VSA (Vendor Specific Attributes) implementation adds flexibility for accounting and session control using RADIUS server
Detailed per-user traffic history log for analysis and record keeping
Billing report gives a summary of transaction records for On-demand users.

Call for Price Now

To open a hotspot store is at finger tips with HSG100 connecting to the Internet pipe via ADSL/ Cable/ Satellite modem. HSG100 also brings in an extra advantage – the wall-mountable, dust-proof (IP50) metal housing.

The HSG100 is the most economical yet feature-rich Wireless Hotspot Gateway, targeting mini-size stores who want to provide small, single-point wireless Internet access service. HSG100 is a perfect choice for beginners to run hotspot businesses. It does not cost a fortune to buy a pile of equipment, nor does it take the skills of an expert to glue multiple applications out of multiple freeware. For a self-proprietor who owns one or several small shops, serving wireless internet service is no magic via HSG100. Many auto-service shops and dental clinics find an HSG100 in service makes their customers' waiting time a breeze. Small coffee shops can offer time-based hotspot service by compliment coupons or paid by hours at ease. For small professional offices such as accounting or law firms who demand high-level network security, a standalone HSG100 enables the offices to provide managed Internet service to their clients or visitors in an isolated fashion, free of charge, while securely preventing unauthorized access to the intranet.

Cechy i zalety

Easy Installation and Operation

Support various broadband deployment options (T1, DSL, Cable) via static IP, DHCP and PPPoE
Integrated access point enables Wi-Fi access and eliminates the need for additional device
Built-in user database provides sufficient account capacity for different operation scenarios
Work with instant account generator to provide user accounts for visitor-based, on-demand operations
Zintegrowane funkcje zabezpieczeń

Standards-based data encryption and user authentication: WEP, WPA, WPA2, IEEE 802.1X
Secure guest and administrator access using web-based login and administration over SSL
Configurable packet filtering policies enhance data traffic security
Built-in DoS protection prevents malicious hackers from collapsing the network
Effective User Management

Complete authentication mechanism blocks unauthenticated users from gaining access to the network
Role-based and policy-based control policies enhances the protection against malicious users
“On-line user list” monitors real-time status of each individual user
Allow session expiration control for On-demand users by time basis
Flexible Accounting and Billing

Programmable billing profiles allow operators to customize the billing plans for On-demand users
Bandwidth control enables class of service for different levels of users and maximize profits
Detailed per-user traffic history log for analysis and record keeping

Feature-packed for hotspot operation, HSG200 comes with built-in 802.11n/b/g access point, web server and web pages for clients to login, easy logo-loading for branding a hotspot store, simple user/visitor account management tool, payment plans, PayPal credit card gateway, traffic logs, IP sharing and etc. Equipped with 4ipWES (Press-n-Connect) technology, the HSG200 is able to establish an automatic WDS link with up to 2 access points at the touch of a button. Extending wireless network coverage is a breeze. To open a hotspot store is at finger tips with HSG200 connecting to the Internet pipe via ADSL/Cable/Satellite modem. HSG200 also brings in an extra advantage – the wall-mountable, dust-proof (IP50) metal housing.

For a self-proprietor who owns one or several small shops, serving wireless internet service is no magic via HSG200. Many auto-service shops and dental clinics find an HSG200 in service makes their customers' waiting time a breeze. Small coffee shops can offer time-based hotspot service by compliment coupons or paid by hours at ease. For small professional offices such as accounting or law firms who demand high-level network security, a standalone HSG200 enables the offices to provide managed Internet service to their clients or visitors in an isolated fashion, free of charge, while securely preventing unauthorized access to the intranet.

2.4GHz 2 x 2 MIMO Field Replaceable Antenna & Backward Compatible with 802.11n/b/g

* The antenna diversity design enhances the connection reliability to improve data transmission capability.
* Two detachable antennas for optimal wireless coverage and field replacement flexibility.
* Equipped with a high-speed IEEE 802.11n/b/g wireless network interface, transmission rates up to 300Mbps.

Easy Installation and Operation

* Support various broadband deployment options (T1, DSL, Cable) via static IP, DHCP and PPPoE.
* Integrated access point enables Wi-Fi access and eliminates the need for additional device.
* Built-in user database provides sufficient account capacity for different operation scenarios.
* Work on-demand account generator to provide user accounts for visitor-based, on-demand operations.

Zintegrowane funkcje zabezpieczeń

*Standards-based data encryption and user authentication: WEP, WPA, WPA2, IEEE 802.1X.
* Secure guest and administrator access using web-based login and administration over SSL.
* Configurable packet filtering policies enhance data traffic security
4ipWES (Press-n-Connect) with push button enables quick/auto WDS link.
* Built-in DoS protection prevents malicious hackers from collapsing the network.

Effective User Management

* Complete authentication mechanism blocks unauthenticated users from gaining access to the network.
* Role-based and policy-based control policies enhances the protection against malicious users.
* “On-line user list” monitors real-time status of each individual user.
* Allow session expiration control for On-demand users by time basis.

Flexible Accounting and Billing

* Programmable billing profiles allow operators to customize the billing plans for On-demand users.
* Bandwidth control enables class of service for different levels of users and maximize profits.
* Detailed per-user traffic history log for analysis and record keeping.

4ipnet HSG200-P Wi-Fi Hotspot Kit jest opłacalny jeszcze cecha-zapakowany wszystko w jedno rozwiązanie gotowe do hotspot pracy zaraz po wyjęciu z pudełka. Jest to najbardziej ekonomiczne rozwiązanie dla mini skalę biznesu hotspot. Kompaktowy HSG200 Bezprzewodowa bramka Hotspot, wyposażony IEEE 802.11n/b/g, 2 × 2 MIMO, Power over Ethernet (PoE) oraz IP50 pyłoszczelna metalowa obudowa, specjalnie skierowany mini-sklepów, którzy chcą zapewnić małe, jedno- Internet bezprzewodowy punkt obsługi dostępu. Dzięki wbudowanym w bazie danych użytkownika i dostosowywać plany połączeń, umożliwia generowanie rachunku na żądanie w kasie. Rozbudowa sieci jest proste z HSG200; hotspot właściciele, którzy chcą rozszerzyć zasięg sieci bezprzewodowej może to zrobić z prostym naciśnięciem przycisku, z opatentowanej technologii 4ipnet firmy, 4ipWES Press-n-Connect dla WDS łatwej konfiguracji, HSG200 automatycznie ustanawia kodowaniem AES Połączenie z punktów 4ipnet dostępu, bez wysiłku i bezpiecznie rozbudowę sieci.

4ipnet NetTicketGen Hotspot Generator biletów Network, składająca się z SDS100 serwera inteligentnego urządzenia i PRT100 POS drukarki, usprawnia na żądanie tworzenia konta i procesów bilingowych poprzez przyciskowego generacji kont i drukowania biletów paragonu. SDS100 generuje kont na żądanie przez wywołanie plany rozliczeniowe w HSG200 i instruuje PRT100 wydrukować odpowiednie bilety konta. Frontline hotspot operacja jest natychmiast uproszczone, recepcjonistki i kasjerzy mogą zapewnić klientom lub gości odwiedzających z wpływów z dostępu przez naciśnięcie kilku przycisków na SDS100, pomijając ręcznej konfiguracji bramki. Wszystko 4ipnet WHG / devices HSG są kompatybilne i łatwo integruje się z NetTicketGen; Każdy WHG / HSG urządzenie może obsługiwać jednocześnie wiele zestawów NetTicketGen poprzez sieć lokalną.

Dokonywanie trochę gotówki na stronie!

By twoi klienci i goście zadowoleni, a jednocześnie trochę gotówki na boku, poprzez zapewnienie im bezprzewodowy dostęp do Internetu. WiFi System biletowy może zająć wszystko od rozliczenia do bezpieczeństwa. Czy HSG200 + SDS100 system z mało znanego 4ipnet firmy wystarczająco dobre dla Twojej firmy? Przeczytaj naszą recenzję, aby dowiedzieć się.

4ipnet w HSG200 hotspot bezprzewodowy i biletów zestaw jest znacznie bardziej poważny wygląd parę produktów to firmy ZyXEL konkurencyjnych system sprzedaży biletów. To wygląda bardziej sprawny z dyskretnym czarnym wykończeniem. Zestaw zawiera HSG200 ruter i SDS100 kontroler biletów, do którego można podłączyć dostarczoną drukarkę termiczną biletów za pomocą dołączonego kabla RS-232. Zarówno HSG200 i SDS100 są narażonych na wstrząsy, z przypadków stalowych i punktów mocowania, aby były łatwe do zabezpieczenia na ścianie lub biurku. Nawet drukarka bilet ma uspokajająco solidną czuć do niego.

Głównym HSG200 urządzenie jest stosunkowo prosty router z portem WAN i 2.4GHz 300Mbit / s 802.11n oraz dwa 10/100Mbit/s Porty LAN - po jednym dla sieci prywatnej i jeden dla sieci publicznej. Co ważniejsze, jak również jednoczesne sieci prywatnych i publicznych, posiada wiele dodatkowych opcji, które pozwalają kontrolować biletów systemu, wyceny i płatności, jeśli chcesz, aby użytkownicy mogli zakupić dostęp karty debetowej lub kredytowej.

SDS100 posiada przyciski pozwalające wybrać od do dziesięciu różnych planów biletów - ceny i czas trwania każdego planu można skonfigurować do własnych potrzeb. Możesz podłączyć wiele jednostek biletów do jednego HSG200 routera, pozwalając, aby bilety były sprzedawane od wielu kasach lub miejscach, ale musisz połączyć je za pomocą przełącznika Ethernet do jednego prywatnym portem sieciowym LAN.

Podstawowa instalacja i konfiguracja była gratifyingly proste, aczkolwiek jeden prywatny port LAN sprawia, że ​​nieco bardziej skomplikowane niż to ma być. Jeśli nie masz przełącznika, to wskazane, aby uporządkować routera wstępnej konfiguracji za pośrednictwem sieci LAN przed podłączyć konsolę biletów.

Po uruchomieniu przez router w prostego internetowego kreatora konfiguracji i podłączeniu SDS100 do prywatnej portu LAN, system jest natychmiast funkcjonalny, choć w podstawowy sposób. Oczywiście dalsza konfiguracja nie jest absolutnie konieczne, jak utworzenie żądane ustawienia zabezpieczeń dla publicznych i prywatnych sieci bezprzewodowych - proponujemy WPA2 dla sieci prywatnej i otwarta dla publiczności jednego - można przeprowadzać dodatkowej konfiguracji bezprzewodowo z łatwością.

Zapora podstawowa pozwala kontrolować ruch do iz sieci publicznej, co ma pierwszorzędne znaczenie. Tabela routingu umożliwia konfigurowanie ustawień NAT na Routing bardziej skomplikowane, ale zalecamy dając gość systemu dostępu tego rodzaju własne dedykowane połączenie z internetem bez dostępu do reszty sieci, zamiast używać HSG200 aby obsługiwać wszystkie publiczne i bezpieczne prywatne Wymagania routingu.

Obok tych cech jest dobrze realizowany Quality of Service (QoS) systemu, który pozwala określić maksymalne w górę iw dół szybkość połączenia do kilku różne rodzaje ruchu, takich jak wideo i głosu. Jest też wsparcie dla różnych dostawców DDNS, choć nie polecamy umożliwia zdalny dostęp do urządzenia, chyba że narzędzia absolutnie konieczne, a także kilka inspekcji sieci i status.

W HSG200 Najważniejsze funkcje są obsługiwane w menu UŻYTKOWNICY, gdzie wyraźne podmenu ułatwiają przypisanie różnych rodzajów biletów dostępu do każdej z opcji 10 w HSG200 firmy. Bilety mogą być definiowane z różnych pobytu i ich ceny, można także zdecydować się na ich ważność w określonych porach, a nawet przesłać obraz logo do umieszczenia na bilety. Po skonfigurowaniu zewnętrznego konwertera płatności, goście mogą płacić za dostęp na swojej karcie kredytowej podczas logowania do sieci, zamiast kupić bilet osobiście w kasie. Płatność może być przetwarzany przez Authorize.net, Paypal, SecurePay lub WorldPay.

With more powerful hardware, WHG401 is capable of centrally managing 190 access points (150 x EAP700 + 40 x other 4ipnet single radio AP) to cover a wider service area in a smaller network.

Simplified Deployment and Reliable Internet Connection
Gigabit Ethernet to meet higher data rate demands of larger networks
Easy to deploy, highly scalable platform allows overlay with existing wired/wireless infrastructure without disruption
Load balancing and WAN failover enhance bandwidth utilization and provide more reliable Internet connection
Powerful Network Security Capabilities for Enterprise Applications
Standards-based data encryption: WEP, WPA, WPA2, IEEE 802.1X, and IPSec VPN
Secure guest and administrator access using web-based login and administration over SSL
Diverse user authentication methods, including built-in Local and On-demand database; supports external authentication servers including POP3, LDAP, RADIUS, Windows Domain, and SIP registrar
Built-in DoS protection keeps malicious hackers from collapsing the network
Site-to-site VPN tunnels allow branch offices to securely connect with one another and share the same account database
Comprehensive Access Control and User Management
Role-based access control and policy enforcement offer management of privileges for different user groups
On-demand account generation provides secure and managed user accounts to visitors
Service Zone function partitions a physical network into up to 9 virtual networks, each with its own definable access control and group policy profiles. Allows hotspot owners to provide various levels of customized services
Individual user bandwidth limit enables flexible traffic control for different scenarios
Centralized Access Point (AP) Management
Centralized remote control and automatic AP discovery
Management and monitoring of managed APs via web-based administration interface, including AP's system settings, online status, enabling/disabling, reset, and firmware upgrade
Periodically monitors APs and notifies the administrator of problematic APs
Flexible Accounting and Easy Billing
Configurable billing profiles allow operators to customize billing plans for on-demand users
Support online payment with credit card through Authorize.net, PayPal and SecurePay
Support for Location-Based Hotspot Services and Customizable UAM Web Pages
The logical concept of Service Zone allows the Controller to differentiate clients by locations and to provide different user experiences (such as different login pages) and network policies
When coupling with VLAN switches and DSLAM devices, the Controller can use its Port Mapping feature to tell the location of each client and therefore provide differentiated services. For example, a hotel guest would not need to type in the password again every time when accessing the Internet in room
By setting up multiple Service Zones and utilizing customized pages or external pages, a single Controller can serve multiple hotspot franchises transparently to the clients
PMS Integration for Hotel Applications
By interfacing the 3rd party middleware – NetRetriever, the controller is able to post billing information to multiple kinds of hotel PMSs, including Micros Fidelio/Opera, HiRUM, RMS, CMS Hospitality, EzyRez, RoomMaster2000, Charts and etc
A hotel guest can obtain an Internet access account at check-in counter, or sign up for the Internet access service in room anytime without the help of clerks. With PMS integration, the guest will receive a single room bill
With a single account, a guest will be able to access the Internet by wire in room or by wireless connection anywhere within the service range of APs connecting to the Controller

Call for Price Now

WHG505 is capable of centrally managing 230 access points (150 x EAP700 + 80 x other 4ipnet single radio AP) to cover a wider service area in a smaller network.

WHG505 – Secure WLAN Controller
Simplified Deployment and Reliable Internet Connection
Gigabit Ethernet to meet higher data rate demands of larger networks
Easy to deploy, highly scalable platform allows overlay with existing wired/wireless infrastructure without disruption
Load balancing and WAN failover enhance bandwidth utilization and provide more reliable Internet connection
Powerful Network Security Capabilities for Enterprise Applications
Standards-based data encryption: WEP, WPA, WPA2, IEEE 802.1X, and IPSec VPN
Secure guest and administrator access using web-based login and administration over SSL
Diverse user authentication methods, including built-in Local and On-demand database; supports external authentication servers including POP3, LDAP, RADIUS, Windows Domain, and SIP registrar
Built-in DoS protection keeps malicious hackers from collapsing the network
Site-to-site VPN tunnels allow branch offices to securely connect with one another and share the same account database
Comprehensive Access Control and User Management
Role-based access control and policy enforcement offer management of privileges for different user groups
On-demand account generation provides secure and managed user accounts to visitors
Service Zone function partitions a physical network into up to 9 virtual networks, each with its own definable access control and group policy profiles. Allows hotspot owners to provide various levels of customized services
Individual user bandwidth limit enables flexible traffic control for different scenarios
Centralized Access Point (AP) Management
Centralized remote control and automatic AP discovery
Management and monitoring of managed APs via web-based administration interface, including AP's system settings, online status, enabling/disabling, reset, and firmware upgrade
Periodically monitors APs and notifies the administrator of problematic APs
Flexible Accounting and Easy Billing
Configurable billing profiles allow operators to customize billing plans for on-demand users
Support online payment with credit card through Authorize.net, PayPal and SecurePay
Support for Location-Based Hotspot Services and Customizable UAM Web Pages
The logical concept of Service Zone allows the Controller to differentiate clients by locations and to provide different user experiences (such as different login pages) and network policies
When coupling with VLAN switches and DSLAM devices, the Controller can use its Port Mapping feature to tell the location of each client and therefore provide differentiated services. For example, a hotel guest would not need to type in the password again every time when accessing the Internet in room
By setting up multiple Service Zones and utilizing customized pages or external pages, a single Controller can serve multiple hotspot franchises transparently to the clients
PMS Integration for Hotel Applications
By interfacing the 3rd party middleware – NetRetriever, the controller is able to post billing information to multiple kinds of hotel PMSs, including Micros Fidelio/Opera, HiRUM, RMS, CMS Hospitality, EzyRez, RoomMaster2000, Charts and etc
A hotel guest can obtain an Internet access account at check-in counter, or sign up for the Internet access service in room anytime without the help of clerks. With PMS integration, the guest will receive a single room bill
With a single account, a guest will be able to access the Internet by wire in room or by wireless connection anywhere within the service range of APs connecting to the Controller

Call for Price Now

Primary Function: Waterproof IP Security Camera with WIFI and Night Vision
Day and night vision with 48 IR LED's (night visibility up to 20 meters)
Multi-level users access and management with password protection.
Allows remote viewing video and record from any internet connection.
Wi-Fi compliant with IEEE 802.11b/g on 2.4 Ghz ISM frequency band.

Connector Type: N plug to NB/H jack
Impedance: 50Ω
Frequency Range: DC ~ 6GHz
VSWR:
1.17 at 2.19GHz
1.24 at 5.61GHz
Insertion Loss: 0.62dB max
0.297dB at 2.48GHz
0.614dB at 5.89GHz
DC Breakdown Voltage: 90V ± 20%
Insulation Resistance: > 10,000MΩ
Impulse Breakdown Voltage: 10KV min (1.2/50μS waveform)
Maximum Withstand Current: 5KA min (8/20μS waveform)

• Frequency Range: 5.1Ghz – 5.9Ghz
• Antenna Gain: 8dBi
• Polarization: Vertical, Omni-Directional
• VSWR: < 1.5 : 1
• Maximum Input Power: 50 watts
• Vertical Beamwith: 17 degrees
• Horizontal Beamwidth: 360 degrees
• Impedance: 50 ohms
• Dimension: 375mm(L) x 17mm(D)
• Weight: 200g
• Connector Type: N-Type Male
• Housing Material Fiberglass
• Operating Temperature -40°C to +80°C

Cechy:

1. Grid Parabolic Antenna
2. Working on 5.5~5.835GHz
3. High 27dbi gain to extend coverage
4. Provide pole mounting
5. H-Plane 8.5° / E-Plane 6.6°

Dane techniczne:

Frequency 5.5 ~ 5.835GHz
Type Grid
Polarization Vertical
Gain 27dBi
VSWR ≦2.0
Beam Width H-Plane 8.5° E-Plane 6.6°
Impedance 50Ω± 5Ω
Connector Type N Type (Female)

Environmental & Mechanical Characteristics

Temperature -30℃ ~ +60℃
Lightning Protection DC Ground
Radome ABS
Dimensions ∮150×600mm
Weight 2860g±50g (w/mount)

ANT-OD-242505M 2.4GHz – 2.5GHz 5dBi Mesh Omni-Directional Antenna
Frequency Range: 2.4GHz – 2.5GHz
Antenna Gain: 5dBi
Polarization: Vertical, Omni-Directional
VSWR: ≤ 1.5 : 1
Maximum Input Power: 50 watts
Vertical Beamwidth: 20 degrees
Horizontal Beamwidth: 360 degrees
Impedance: 50 ohms
Dimension: 330mm(L) x 17mm(D)
Waga: 85g
Connector Type: N-Type Male
Housing Material: Fiberglass
Operating Temperature: -40°C to +80°C

Cechy:

1. Grid Parabolic Antenna
2. Working on 2400MHz
3. High 24dbi gain to extend coverage.
4. Pole mounting supplied.

Specyfikacja

Frequency 2400 ~ 2500MHz
Type Grid Parabolic
Polarization Linear, Horizontal / Vertical
Gain 24dBi
VSWR 2.0:1
Beam Width H-Plane 9° E-Plane 11°
Impedance 50Ω
Connector Type N-type(female)

Environmental & Mechanical Characteristics

Temperature -40 to 85℃
Lightning Protection DC Ground
Radome ABS, UV resistant
Dimensions 1000 x 600 mm
Weight 5 kg

By supporting 802.1p/802.1Q QoS and 802.11e WMM, EAP100 ensures the quality of communication for multimedia applications like voice, audio and video. The dual IEEE 802.3af PoE compliant design not only provides both data transfer and power supply through the same Ethernet cable but supports redundant connectivity with failover function.

Cechy i zalety

High Speed IEEE 802.11g and Backward Compatible with 802.11b

Equipped with a high-speed IEEE 802.11g wireless network interface based on Atheros™ chipset, transmission rates up to 54Mbps
WDS Repeater for Extending Wireless Coverage

Creates structural WDS (Bridge or Repeater) links connecting to other WDS-capable APs
Repeater links can serve as EAP100′s LAN connections to replace Ethernet ports, or simply bridge the wired side and the wireless side as a single network
Supporting QoS & 802.11e WMM

Supports IEEE 802.1p/IEEE 802.1Q Quality of Service (QoS) tagging features
Supports IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty multimedia applications like voice, audio and video
Business-class WLAN Security & Client Authentications

Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key)
Wireless LAN segmentation, Disable SSID Broadcast and the option of station-isolation
Ability to be configurable to filter out unauthorized wireless clients with build-in MAC-based access control list or via a back-end RADIUS server by sending an authentication request
Support business-class WLAN security, multiple-SSID, and VLAN tagging

Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key).
Support multiple ESSIDs and VLAN tagging.
MAC ACL list & RADIUS client support for filtering out unauthorized wireless clients.
Multiple Virtual APs & Capability of Client Isolation

One EAP100 can emulate up to 8 Virtual APs (VAP), each with its own ESSID; namely, one AP can have 8 ESSIDs
Each VAP appears to clients as an independent AP and its traffic and be associated with a VLAN ID
Supports client isolation, isolated from each other under one AP
Wall mountable Dust-proof Metal Housing

Enclosed in a metal housing, durable and non-fire hazard for the industrial environment
Dual-PoE with Link Failover

The IEEE 802.3af Power over Ethernet (PoE) compliant design eliminates the need for power sockets, allows installation of this device in areas where power outlets are not readily available to improve deployment flexibility, and provides standard based compatibility with other device
Provides dual-PoE 10/100 Fast Ethernet ports with failover function for redundant connectivity

EAP300 comes with all standards demanded by enterprise applications, including business-grade security (802.1X, WPA and WPA2), and multiple ESSIDs with VLAN tags to separate the traffics of different departments. Beyond common expectations, EAP300's real surprise is the patent-pending WES (Press-n-Connect) technology. Bridging multiple EAP300s is at the touch of a button with 4ipWES, which enables a quick and automatic WDS Easy Setup by pressing the WES button on EAP300. Extending wireless network coverage is a breeze. Supporting up to 300Mbps wireless speed with its 802.11n 3×3 MIMO solution, and a gigabit Ethernet interface, EAP300 is perfect for bandwidth-hungry applications such as video surveillance, multi-media streaming over wireless. The QoS – WMM ensures the quality of voice/video when multiple applications are transmitting media and data over the air simultaneously. EAP300′s higher throughput, security and durability make it a perfect choice of wireless connectivity for your business.

Cechy i zalety

Dual-band 3 x 3 MIMO Field Replaceable Antenna & Backward Compatible with 802.11a/b/g

The antenna diversity design enhances the connection reliability to improve data transmission capability
Three detachable high-gain antennas for optimal wireless coverage and field replaceable to meet customer demands for specific environment
Equipped with a high-speed IEEE 802.11n/a/b/g wireless network interface, transmission rates up to 300Mbps
WDS/Repeater for Extending Wireless Coverage

Creates structural WDS (Bridge or Repeater) links connecting to other WDS-capable APs
Repeater links can serve as EAP300′s LAN connections to replace Ethernet ports, or simply bridge the wired side and the wireless side as a single network
Supporting QoS & 802.11e WMM

Supports IEEE 802.1p/IEEE 802.1Q Quality of Service (QoS) tagging features
Supports IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty multimedia applications like voice, audio and video
Business-class WLAN Security & Client Authentications

Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key)
Wireless LAN segmentation, Disable SSID Broadcast and the option of station-isolation
4ipWES (Press-n-Connect) with push button enables quick/auto WDS link
Ability to be configurable to filter out unauthorized wireless clients with build-in MAC-based access control list or via a back-end RADIUS server by sending an authentication request
Multiple Virtual APs & Capability of Client Isolation

One EAP300 can emulate up to 8 Virtual APs (VAP), each with its own ESSID; namely, one AP can have 8 ESSIDs
Each VAP appears to clients as an independent AP and its traffic and be associated with a VLAN ID
Supports client isolation, isolated from each other under one AP
Wall mountable Dust-proof Metal Housing

Enclosed in a metal housing, durable and non-fire hazard for the industrial environment
Gigabit Ethernet port with PoE

The IEEE 802.3af Power over Ethernet (PoE) compliant design eliminates the need for power sockets, allows installation of this device in areas where power outlets are not readily available to improve deployment flexibility, and provides standard based compatibility with other device
Provides 10/100/1000 Gigabit Ethernet port, matching the wire and wireless throughput.

It has the interfaces to serve both wireless and wired LAN access. The simplistic yet chic design of EAP700 allows it to blend into a working or a living environment practically and elegantly. By utilizing PoE, EAP700 comes with an advantage of running fewer cables in the duct. The Power over Ethernet (PoE) LAN port on the EAP700 serves as the power feed as well as the wired network feed. Optionally, it can also be powered via an AC adapter when PoE switch is not available.

Standalone, EAP700 is an easy-to-install and cost-effective solution for most of indoor wireless deployments, including hotel rooms, apartments, offices, classrooms, libraries, private homes, public kiosks, etc. When working under one of 4ipnet Controllers, the combined network turns into an intelligent building solution, a managed internet service, or a Wi-Fi hotspot network of various scales. Multi-pack is available at lower cost to contractors/builders for larger deployments.

Cechy i zalety

Hidden in-the-wall behind faceplate, blending well into most of interior/architectural designs

Clean and stylish look. The main unit fits in a standard size outlet box, hidden behind the wall-jack faceplate.
The faceplate is a two-piece design, slide-able for adjusting the depth of the portion that goes in-the-wall, and for covering the mistakes around the cut-out hole.
Easy to install, fewer cables to run, flexible power feed options, meeting building codes

The IEEE 802.3af Power over Ethernet (PoE) eliminates the need for power sockets, allowing installation of this device in areas where power outlets are not readily available to improve deployment flexibility.
Using a single CAT5e cable feed both power and Ethernet data. Optional AC power feed is available.
High speed interface and QoS/WMM support,ideal for voice, video, and data applications

Equipped with a powerful, high-speed IEEE 802.11b/g wireless interface and hidden 2.4GHz antenna.
With the additional QoS/WMM support, EAP700 is ideal for converged voice, video, and data applications.
Connections for both wireless and wired clients

Keep the style of a simple LAN wall jack while being able to serve both LAN and WLAN devices.
Support business-class WLAN security, multiple-SSID, and VLAN tagging

Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key).
Support multiple ESSIDs and VLAN tagging.
MAC ACL list & RADIUS client support for filtering out unauthorized wireless clients.
Flexible deployment – standalone, or managed in an intelligent building solution

Stand-alone, EAP700 is a full AP (without router), normally chained from a modem router to service clients.
WDS links can be established to bridge other APs for extending WLAN coverage.
Supports client isolation, important in a hotspot or hospitality environment.
When managed under a 4ipnet Controller, such as the WHG-series, the combination has been pre-integrated to provide solutions for many applications.

EAP200 makes the wireless communication fast, secure and easy. It supports business grade security such as 802.1X, and Wi-Fi Protected Access (WPA and WPA2). By pushing a purposely built button, 4ipWES (Press-n-Connect) feature makes it easy to bridge wireless links of multiple EAP200s for forming wider wireless network coverage. EAP200 also features multiple ESSIDs with VLAN tags; one EAP200 can emulate up to eight Virtual APs, great for enterprise applications, such as separating the traffics of different departments using different ESSIDs.

Supporting up to 300Mbps wireless speed with its 802.11n 2 x 2 MIMO solutions, EAP200 is perfect for bandwidth-hungry applications such as video surveillance, multimedia streaming over the wireless links. Its QoS – WMM feature ensures the quality of voice/ video when multiple applications are transmitting media and data over the air at the same time.

EAP200's higher throughput, security and durability make it a perfect choice of wireless connectivity for your applications.

2.4GHz 2 x 2 MIMO Field Replaceable Antenna & Backward Compatible with 802.11n/b/g
The antenna diversity design enhances the connection reliability to improve data transmission capability
Two detachable antennas for optimal wireless coverage and field replacement flexibility
Equipped with a high-speed IEEE 802.11n/b/g wireless network interface, transmission rates up to 300Mbps
WDS/Repeater for Extending Wireless Coverage
4ipWES (Press-n-Connect) with push button enables quick/auto WDS link
Creates structural WDS (Bridge or Repeater) links connecting to other WDS-capable APs
WDS links can serve as EAP200′s LAN connections to replace Ethernet ports, or simply bridge the wired side and the wireless side as a single network
Supporting QoS & 802.11e WMM
Supports IEEE 802.1p/IEEE 802.1Q Quality of Service (QoS) tagging features
Supports IEEE 802.11e Wireless Multi-Media to fulfill bandwidth thirsty triple-play (voice, audio and video) applications
Business-class WLAN Security & Client Authentications
Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key)
Wireless LAN segmentation, Disable SSID Broadcast and the option of station-isolation
Configuration-capable to filter out unauthorized wireless clients with build-in MAC-based access control list or via a back-end RADIUS server by sending an authentication request
Multiple Virtual APs & Capability of Client Isolation
One EAP200 can emulate up to 8 Virtual APs (VAP), each with its own ESSID; namely, one AP can have 8 ESSIDs.
Each VAP appears to clients as an independent AP and its traffic and be associated with a VLAN ID.
Supports client isolation, isolated from each other under one AP
Wall mountable Dust-proof Metal Housing
Enclosed in a metal housing, durable and non-fire hazard for the industrial environment
Dual-PoE with Link Failover
The IEEE 802.3af Power over Ethernet (PoE) compliant design eliminates the need for power sockets, allows installation of this device in areas where power outlets are not readily available to improve deployment flexibility, and provides standard based compatibility with other device
Provides dual-PoE 10/100 Fast Ethernet ports with failover function for redundant connectivity.

Technical specifications Peripheral type Wireless router
Standards 802.11b/g/n (Draft)
Transfer rate 300 Mbps
Frequency range 5 GHz
Routing protocols TCP/IP
Safety features IP access control list
Firewall SPI
Filtrowanie treści
IPS (Intrusion Prevention System)
Management features SNMP version 1, 2c
Antenna 3
Dimensions 198 x 131 x 198 mm
Weight 0.55 kg
Contents WRVS4400N router, CD-ROM with user manual and QuickVPN software, network cable, power adapter, set-up guide

Technical Specifications Norm IEEE 802.11b, IEEE 802.3af, IEEE 802.11g
Transfer Speed 108 Mbps
Encrypting WEP 64-Bit/128-Bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT
Antenna 2 detachable aerials
Ethernet Power over Ethernet
Size 170 x 205 x 195 mm
Weight 400g
Included Accessories 2 detachable aerials, CD-Rom, Ethernet cable, mains power supply, registration card.

General Device Type Radio access point
Width 17 cm
Depth 4.1 cm
Height 17 cm
Weight 390 g
Networking Form Factor External
Connectivity Technology Wireless
Data Transfer Rate 300 Mbps
Line Coding Format OFDM
Data Link Protocol IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft)
Spread Spectrum Method OFDM, DSSS
Network / Transport Protocol DHCP
Remote Management Protocol SNMP 1, SNMP 2c, HTTP, HTTPS
Frequency Band 2.4 GHz
Status Indicators Link activity, power, link OK
Features DHCP support, power over Ethernet (PoE), load balancing, VLAN support, Syslog support, E-mail alert, MAC address filtering, IPv6 support, firmware upgradable, MIMO technology, Wi-Fi Multimedia (WMM) support, event log, Quality of Service (QoS), RADIUS support, Wi-Fi Protected Setup (WPS)
Encryption Algorithm 128-bit WEP, 64-bit WEP, WPA, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise
Authentication Method Radio Service Set ID (SSID), Basic Service Set Identifier (BSSID)
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.1p, IEEE 802.11b, IEEE 802.3af, IEEE 802.11d, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11n (draft), Wi-Fi Protected Setup
Aerial Antenna External detachable
Antenna Qty 3
Directivity Omni-directional
Gain Level 2 dBi
Expansion / Connectivity Interfaces 1 x network / power – Ethernet 10Base-T/100Base-TX/1000Base-T – RJ-45
Miscellaneous Cables Included 1 x network cable
Compliant Standards CE, IC, FCC
Power Power Over Ethernet (PoE) Yes
Power Device Power adapter – external
Software / System Requirements OS Provided Linux
Environmental Parameters Min Operating Temperature 0 °C
Max Operating Temperature 40 °C
Humidity Range Operating 10 – 85%

General Device Type Wireless router
Form Factor External
Memory RAM 64 MB
Flash Memory 32 MB
Networking Connectivity Technology Wireless, wired
Integrated Switch 4-port switch
Data Link Protocol Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Switching Protocol Ethernet
Network / Transport Protocol TCP/IP, UDP/IP, L2TP, PPPoE
Routing Protocol RIP-1, RIP-2, IGMPv2, IGMP, static IP routing, IGMPv3, GRE
Remote Management Protocol SNMP 2, HTTP, HTTPS
Capacity IPSec VPN tunnels : 5
Status Indicators Port status, power
Features NAT support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), Syslog support, traffic shaping, Stateful Packet Inspection (SPI), DoS attack prevention, VPN passthrough, URL filtering, Low-latency queuing (LLQ), Weighted Fair Queuing (WFQ), Wi-Fi Multimedia (WMM) support, Access Control List (ACL) support, Quality of Service (QoS), Wi-Fi Protected Setup (WPS), DHCP server, wireless bridge mode
Compliant Standards IEEE 802.1Q, IEEE 802.11b, IEEE 802.11g, IEEE 802.11i, Wi-Fi CERTIFIED, IEEE 802.11n
IP Telephony VoIP Functionality VoIP phone adapter
VoIP Protocols SIP v2
Voice Codecs G.711, G.723.1, G.726
Telephony Interfaces 2 phone (FXS), 1 line (FXO)
IP Telephony Features Echo cancellation, comfort noise generation (CNG), voice activity detection (VAD), Caller ID, call waiting, call hold, call transfer, silence suppression, DTMF generation/detection
Aerial Aerial External integrated
Antenna Qty 1
Gain Level 2.2 dBi
Expansion / Connectivity Interfaces 4 x network – Ethernet 10Base-T/100Base-TX – RJ-45 ¦ 1 x network – Ethernet 10Base-T/100Base-TX – RJ-45 ( WAN ) ¦ 1 x phone line – FXO – RJ-11 ¦ 2 x phone line – FXS – RJ-11 ¦ 1 x Hi-Speed USB – 4 PIN USB Type A
Miscellaneous Cables (Details) 1 x network cable ¦ 1 x phone cable
Encryption Algorithm Triple DES, 128-bit WEP, 64-bit WEP, TKIP, WPA, WPA2
Authentication Method RADIUS, Radio Service Set ID (SSID)
Compliant Standards ETSI, CISPR 24, EN 61000-3-2, ICES-003, EN 61000-3-3, EN55024, CISPR 22, EN50082-1, AS/NZS 60950-1, RSS-210, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, FCC Part 15, CS-03, EN 61000-4-5, EN 61000-6-2, EN 61000-4-11, FCC CFR47 Part 15, EN300-386, EN 61000-4-8, UL 60950-1, IEC 60950-1, EN 60950-1
Power Power Device Power adapter – external
Voltage Required AC 120/230 V
Software / System Requirements Software Included Drivers & Utilities
Environmental Parameters Min Operating Temperature 0 °C
Max Operating Temperature 40 °C
Humidity Range Operating 5 – 95%

When operating in CPE (Client) mode, it functions as a Wi-Fi modem gateway to receive wireless signal over the last-mile Internet feed from WISPs. The CPE's bandwidth to the Internet can be assigned by the WISP. When in AP mode, OWL510 operates as an AP station with wall-penetrating high-power signal and long-range coverage to better serve Wi-Fi clients. In addition, it can be set up as a WDS-mesh node by establishing multiple WDS links to bridge neighbor access points together. Coming with business-class security, OWL510 in AP mode is also ideal for enterprise applications. Furthermore, one OWL510 with multiple SSIDs is capable of acting as multiple Virtual APs (VAPs). By tagging the traffic from each VAP with a unique VLAN ID, it allows for segmenting a corporate network using VLANs to protect critical resources. Being a versatile Wi-Fi device, OWL510 does not limit itself to outdoor usage only. When managed by a Controller (such as the WHG-series), it performs as a Wi-Fi base station in either a public or private wireless access deployment.

Cechy i zalety

Rugged, Compact-Sized, and Adaptive to Versatile Environments

Diversified deployments:
Municipal Wi-Fi service
Home Ower Association (HOA), RV parks, and recreation resorts
Hotels, mobile hospitals, and mobile libraries
Shopping malls, airports, harbors, roadways, warehouse, and manufacturing plants
IP68 weather- and water-proof
Housed in durable, rust-resistant metal casing
High Transmit Power and Built-in Patch Antenna

Up to 500mW output power from the board to transmit stronger signals for longer range
Built-in patch antenna for installation convenience and efficiency
LED indicators to display wireless signal strength
High-speed with QoS for Voice, Video, and Data Applications

Equipped with a high-speed IEEE 802.11g wireless network interface based on Atheros™ chipset, transmit rates up to 54Mbps
Backward compatible with 802.11b
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty triple-play (voice, video, and data) applications
Power over Ethernet (PoE) & Flexible Mounting Options

PoE feature reduces the need of additional power cable to the device; a quality Power Supply Equipment (PSE) is bundled in the package
Wall and pole mountable; mounting kit included
Multiple Operation Modes for Different Infrastructures

Two administrator accounts – one for WISP to manage wireless broadband subscribers
Multiple operation modes:
CPE Mode – wireless modem with IP sharing
AP Mode – pure AP
WDS Mode – AP with wireless bridge
Universal Repeater Mode – with MAC NAT
Business-class Security and Multiple-SSID/ VLAN tagging Support

Full range of enterprise-grade wireless security mechanisms such as WEP, WPA and WPA2 (802.11i)
Multiple-SSID capability enables one OWL510 to behave like up to 8 unique Virtual APs (VAPs), the equivalent of 8 wireless Virtual LANs (VLANs) to securely segment wireless network traffic
Support client isolation in public hotspot operation.

When operating in CPE (Client) mode, it functions as a Wi-Fi modem gateway to receive wireless signal over the last-mile Internet feed from WISPs. The CPE's bandwidth to the Internet can be assigned by the WISP. When in AP mode, OWL510 operates as an AP station with wall-penetrating high-power signal and long-range coverage to better serve Wi-Fi clients. In addition, it can be set up as a WDS-mesh node by establishing multiple WDS links to bridge neighbor access points together. Coming with business-class security, OWL510 in AP mode is also ideal for enterprise applications. Furthermore, one OWL510 with multiple SSIDs is capable of acting as multiple Virtual APs (VAPs). By tagging the traffic from each VAP with a unique VLAN ID, it allows for segmenting a corporate network using VLANs to protect critical resources. Being a versatile Wi-Fi device, OWL510 does not limit itself to outdoor usage only. When managed by a Controller (such as the WHG-series), it performs as a Wi-Fi base station in either a public or private wireless access deployment.

Cechy i zalety

Rugged, Compact-Sized, and Adaptive to Versatile Environments

Diversified deployments:
Municipal Wi-Fi service
Home Ower Association (HOA), RV parks, and recreation resorts
Hotels, mobile hospitals, and mobile libraries
Shopping malls, airports, harbors, roadways, warehouse, and manufacturing plants
IP68 weather- and water-proof
Housed in durable, rust-resistant metal casing
High Transmit Power and Built-in Patch Antenna

Up to 500mW output power from the board to transmit stronger signals for longer range
Built-in patch antenna for installation convenience and efficiency
LED indicators to display wireless signal strength
High-speed with QoS for Voice, Video, and Data Applications

Equipped with a high-speed IEEE 802.11g wireless network interface based on Atheros™ chipset, transmit rates up to 54Mbps
Backward compatible with 802.11b
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty triple-play (voice, video, and data) applications
Power over Ethernet (PoE) & Flexible Mounting Options

PoE feature reduces the need of additional power cable to the device; a quality Power Supply Equipment (PSE) is bundled in the package
Wall and pole mountable; mounting kit included
Multiple Operation Modes for Different Infrastructures

Two administrator accounts – one for WISP to manage wireless broadband subscribers
Multiple operation modes:
CPE Mode – wireless modem with IP sharing
AP Mode – pure AP
WDS Mode – AP with wireless bridge
Universal Repeater Mode – with MAC NAT
Business-class Security and Multiple-SSID/ VLAN tagging Support

Full range of enterprise-grade wireless security mechanisms such as WEP, WPA and WPA2 (802.11i)
Multiple-SSID capability enables one OWL510 to behave like up to 8 unique Virtual APs (VAPs), the equivalent of 8 wireless Virtual LANs (VLANs) to securely segment wireless network traffic
Support client isolation in public hotspot operation.

Its dual Power over Ethernet (PoE) ports provides redundant power feeds to increase power supply availability. Hardware Flexibility for Networking and Multi-Radio, External Antenna Connectors. Hardware wise, a single OWL800 is capable of hosting 2-4 multiple radio modules simultaneously. Each module can be used for serving wireless clients, building wireless bridges, or establishing wireless backhauls. For some countries that permit high-power transmission, higher power modules are optionally available. There are 4 N-type antenna connectors extended from the modules on the OWL800 board, which not only gives the flexibility in choosing antennas but greatly simplifies the antenna installation. Software Flexibility for Networking.

Multi-Mode, Multi-Link. AP, Bridge/Mesh Node, Gateway. To support diversified wireless network architectures, the OWL800 provides multiple operating modes, including Point-to-Point Bridge, Point-to-Multipoint Bridge, AP station and AP Gateway. Unlike most of common access points that rely on a single radio for different purposes at one time, the OWL800 with multiple radio modules receives and transmits over-the-air signals for each bridge link or AP station with one dedicated wireless radio to prevent degraded performance.

Cechy i zalety

Rugged for Outdoor or Harsh Environment

Weatherproof and watertight cast-metal housing with an IP68 rating
Surge immunity up to 15KV
Dual PoE for redundant power input and data link
Support multiple operation modes – Gateway mode, AP mode, and Relay mode
Multiple Radios and Antenna Connectors, Flexible for PtP, PtMP, or Mesh networks

Two built-in 802.11 a/b/g radio with two additional mini-PCI slots for expansion
High power radio modules are available options for countries where higher power transmitting is permitted
Low-loss N-type connectors allow for more flexible antenna choices for professionals
Antennas can be attached directly on the OWL800, or connected closely to OWL800, for reducing signal losses
Dual bands (2.4G and 5G) with more channels allow better channel planning to avoid interference
Each Radio module can be configured as AP or WDS independently. Up to four modules can be serving in one OWL800
Built-in AAA and User Management for Hotspot Operation

Support built-in Local accounts and On-demand accounts for user authentication
Support multiple external RADIUS servers for user authentication
Support UAM and IEEE802.1x access control functions
Built-in Hotspot access control and billing features
Robust and Reliable Wireless Link Construction

Dual PoE power input
Support 8 WDS links per 802.11a/b/g radio module
WDS discovery and link table for easy connect
Support VLAN tags over wireless inter-AP links (WDS) in addition to over the wireless links from clients to AP
Dynamic wireless link backup for network reliability
Dedicated WDS radios could form a mesh WLAN without taking away some bandwidth for serving clients
Wireless Security and QoS Support

Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or Pre-Shared Key
Support encryption, including WEP, AES, or TKIP, over wireless inter-AP links (WDS)
Wireless LAN segmentation, Disable SSID Broadcast
Support client-isolation so that clients are isolated from each other under one AP
Support QoS tags over wireless inter-AP links (WDS)
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty multimedia applications such as voice, audio and video
Excellent Solution for Community WLAN

Each AP module is capable of emulating up to 8 virtual APs (VAPs) simultaneously
With the capabilities of multiple-SSID and VLAN tag association, OWL800 allows equipment-sharing among different franchises; moreover, its QoS feature enables differentiated service operations
Multiple OWL800′s can be managed under an external WLAN controller to form a managed WLAN solution.

OWL400 supports multiple operation modes (AP/Bridge/CPE) and works well as a last-mile solution for wireless ISPs (WISPs). When in AP mode , OWL400 operates as an AP station with wall-penetrating high-power signal and long-range coverage to better serve Wi-Fi clients. In addition, it can be set up as a WDS node by establishing multiple WDS links to bridge neighbor access points together.

Coming with business-class security, OWL400 in AP mode is also ideal for enterprise applications. Furthermore, one OWL400 with multiple SSIDs is capable of acting as multiple Virtual APs (VAPs). By tagging the traffic from each VAP with a unique VLAN ID, it allows for segmenting a corporate network using VLANs to protect critical resources.

When operating in CPE (Client) mode , it functions as a Wi-Fi modem gateway to receive wireless signal over the last-mile Internet feed from WISPs. The CPE's bandwidth to the Internet can be assigned by the WISP.

Being a versatile Wi-Fi device, OWL400 does not limit itself to outdoor usage only. When managed by a Controller (such as the WHG-series), it performs as a Wi-Fi base station in either a public or private wireless access deployment.

Rugged, Compact-Sized, and Adaptive to Versatile Environments
Diversified deployments:
Municipal Wi-Fi service
Home Owner Association (HOA), RV parks, and recreation resorts
Hotels, mobile hospitals, and mobile libraries
Shopping malls, airports, harbors, roadways, warehouse, and manufacturing plants
IP68 weather- and water-proof, housed in durable, rust-resistant metal casing
High Transmit Power and N-type Connector
Up to 200mW output power from the board to transmit stronger signals for longer range
N-type connector allows for choosing suitable antenna types and gains with flexibility
High-speed with QoS for Voice, Video, and Data Applications
Equipped with a high-speed IEEE 802.11n/a chipset, supporting transmit rate up to 300Mbps
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty triple-play (voice, video, and data) applications
Power over Ethernet (PoE) & Flexible Mounting Options
PoE feature reduces the need of additional power cable to the device; a quality Power Supply Equipment (PSE) is bundled in the package
Wall and pole mountable; mounting kit included
Multiple Operation Modes for Different Infrastructures
Two administrator accounts – one for WISP to manage wireless broadband one for subscribers
Multiple operation modes:
AP Mode – pure AP
WDS Mode – AP with wireless bridge
Universal Repeater Mode – with MAC NAT
CPE Mode – wireless modem with IP sharing
Business-class Security and Multiple-SSID/ VLAN tagging Support
Full range of enterprise-grade wireless security mechanisms such as WEP, WPA and WPA2 (802.11i)
Multiple-SSID capability enables one OWL400 to behave like up to 7 unique APs, the equivalent of 7 wireless Virtual LANs (VLANs) to securely segment wireless network traffic
Support client isolation in public hotspot operation

The IP68-rated metal sealed CPE100 is compact in size and weatherproof. Coming with a mounting kit, it can be mounted on a pole or wall. It is suitable for both indoor and outdoor usage with its 200mW output power.

The CPE 100 can be deployed in various environments, for example:

• Outdoor access point for school campuses, enterprise campuses, or manufacture plants.
• Wireless CPE for MDU/ MTU, such as apartments, dormitories, and office complexes.
• Indoor access point for hotels, factories, or warehouses where metal industrial grade devices are preferred.
• Public hotspot operation for café, parks, convention centers, shopping malls, or airports.
• Wireless coverage for both indoor and outdoor ground for private resorts, acre estate/home's yards, or golf course communities.

A WISP Deployment Example

Acts as a “Wireless Modem” to bring wireless bandwidth to home and office buildings.
Wireless Bandwidth Allocation (uplink/downlink) delivered to each building depending on different subscription plans.
Full range of wireless security mechanisms such as WEP, WPA and WPA2 (802.11i) that are important for enterprise wireless deployments.
Acts as a Home Router for IP Sharing and firewall, all-in-one installation solution.
Weatherproof and watertight from its rugged aluminum housing (IP68 Approved).
Power over Ethernet (PoE) built-in for single cable installation.
On board Ethernet surge protection.
Multi-mode Support:
CPE Mode
AP Mode
WDS Mode
Universal Repeater (Bridge) Mode

The IP68-rated metal sealed CPE110 is compact in size and weatherproof. Coming with a mounting kit, it can be mounted on a pole or wall. It is suitable for both indoor and outdoor usage with its 200mW output power.

The CPE 100 can be deployed in various environments, for example:

• Outdoor access point for school campuses, enterprise campuses, or manufacture plants.
• Wireless CPE for MDU/ MTU, such as apartments, dormitories, and office complexes.
• Indoor access point for hotels, factories, or warehouses where metal industrial grade devices are preferred.
• Public hotspot operation for café, parks, convention centers, shopping malls, or airports.
• Wireless coverage for both indoor and outdoor ground for private resorts, acre estate/home's yards, or golf course communities.

A WISP Deployment Example

Acts as a “Wireless Modem” to bring wireless bandwidth to home and office buildings.
Wireless Bandwidth Allocation (uplink/downlink) delivered to each building depending on different subscription plans.
Full range of wireless security mechanisms such as WEP, WPA and WPA2 (802.11i) that are important for enterprise wireless deployments.
Acts as a Home Router for IP Sharing and firewall, all-in-one installation solution.
Weatherproof and watertight from its rugged aluminum housing (IP68 Approved).
Power over Ethernet (PoE) built-in for single cable installation.
On board Ethernet surge protection.
Multi-mode Support:
CPE Mode
AP Mode
WDS Mode
Universal Repeater (Bridge) Mode

> Free to View HD Digital TV

> 780p /1080i Resolutions

> Digital Radio and Data Channels

> Automatic Channel Search

> HDMI Output

> Single Scart Socket

> Connects to existing aerial system and TV

Description: Outdoor antenna

Frequency range: Digital terrestrial TV

Coverage: 24 dB

Wymiary
Wysokość: 75 cm
Width: 54 cm
Depth: 128.2 cm

Weight With packaging: 3 kg

Content Mounting kit, connectors and coaxial cable