Caracteristici

1.Actual testarea gama ajunge până la 50 km
De transfer de până la 40Mbps 2.High
3.Support Bridge (PTP, PTMP)
4.High de securitate (AES)
5.Ease de instalare (real Link test de timp pentru IRSD locală şi la distanţă)
6.Transmit de putere de control
7.Bandwidth de control (40/20/10/5 MHz)
8.Wireless TDMA (TDD Mode)
9.VLAN trecere Suport
Evaluat la 10.IP67 Metal Carcasă impermeabilă în aer liber cu design Vent

Specificaţii

Fără fir
Standard Proprietar
Frecventa 5120 ~ 6060MHz
Modulare 64QAM 3/4, 64QAM 2/3, 16QAM 3/4, 16QAM 1/2, QPSK 3/4, QPSK 1/2, BPSK 3/4, BPSK 1/2
Rata de date de până la 40Mbps în termen de 50 kilometri
Canal de banda 5/10/20 MHz
Securitate WEP / criptarea AES
Sensibilitate -92 dBm
Putere de iesire 23dBm
Transmit Power Control 5 nivele
Modul de operare Podul (PTP, PTMP)

Software-ul Caracteristici DFS

Instrumentul de testare link-ul (Real Time locală şi la distanţă IRSD)
Spanning Tree (STP)
802.1Q VLAN trec prin
NTP Client

Administrare

Web-based
La distanţă firmware upgradabil
Suport SNMP V2 (Private MIB, 802.11 MIB)
CLI
Backup / Restore
Sistemul de Log
Remote Log Server
Hardware Watch Dog

Hardware

Procesor Intel 266MHz IXP422 Atheros2414
Flash 16MB SDRAM 32MB
LED-uri de putere Indicarea, Ethernet, wireless, IRSD (5 LED-uri)
Conector Antena 1 x conector nTastaţi

Ethernet

10/100BASE-TX auto-negociere port Ethernet x 1 (conector RJ-45)
Auto MDI / MDI-X activat, Putere IEEE802.3af Over Ethernet Compatibil

Mediu

Temperatura de operare: -30 ° C ~ 80 ° C,
Temperatura de depozitare: -30 ° C ~ 85 ° C
Umiditate: 100% (fără condens)
Sursa de alimentare 802.3af PoE, 48V 0.35A
Impermeabil
IP67 Certificat
Montare perete, Polul Muntele, Muntele Polul Opţional pentru Polul de lumină
Dimensiuni 259 (L) x 250 (W) x 75 (H) mm

Caracteristici

1.Actual testarea gama ajunge până la 50 km
De transfer de până la 40Mbps 2.High
3.Support Bridge (PTP, PTMP)
4.High de securitate (AES)
5.Ease de instalare (real Link test de timp pentru IRSD locală şi la distanţă)
6.Transmit de putere de control
7.Bandwidth de control (5/10/20 MHz)
8.Wireless TDMA (TDD Mode)
9.VLAN trecere Suport
Evaluat la 10.IP67 Metal Carcasă impermeabilă în aer liber cu design Vent

Specificaţii

Fără fir
Standard Proprietar
Banda de frecvenţă de 2412-2472MHz
Modulare 64QAM 3/4, 64QAM 2/3, 16QAM 3/4, 16QAM 1/2, QPSK 3/4, QPSK 1/2, BPSK 3/4, BPSK 1/2
Rata de date de până la 40Mbps în termen de 50 kilometri
Canal de banda 5/10/20 MHz
Securitate WEP / criptarea AES
Sensibilitate -92 dBm
Putere de iesire 23dBm
Transmit Power Control 5 nivele
Modul de operare Podul (PTP, PTMP)

Software-ul Caracteristici DFS

Instrumentul de testare link-ul (Real Time locală şi la distanţă IRSD)
Spanning Tree (STP)
802.1Q VLAN pass through
NTP Client

Administrare

Web-Based management
Remote firmware upgradeable
Support SNMP V2 (Private MIB, 802.11 MIB)
CLI
Backup / Restore
System Log
Remote Log Server
Hardware Watch Dog

Hardware

Processor Intel IXP422 266MHz Atheros2414
Flash 16MB SDRAM 32MB
LED Indication Power, Ethernet ,Wireless, RSSI (5 LEDs)
Antenna Connector 1 x Ntype connector

Ethernet

10/100BASE-TX auto-negotiation Ethernet port x 1 (RJ-45 connector)
Auto MDI/MDI-X enabled, IEEE802.3af Power Over Ethernet Compatible

Mediu

Operating Temperature: -30 °C ~ 80 °C
Storage Temperature: -30 °C ~ 85 °C
Humidity: 100%(non condensing)
Power Supply 802.3af PoE, 48V 0.35A
Impermeabil
IP67 Certificated
Mounting Wall Mount, Pole Mount, Optional Pole Mount for Light Pole
Dimensions 259 (L) x 250 (W) x 75 (H) mm

Electrical Specifications
MODEL KC16T
Maximum Power 16W
Tolerance +15% / -5%
Maximum Power Voltage 17.4V
Maximum Power Current 0.93A
Open Circuit Voltage 21.7V
Short Circuit Current 1.00A
Dimension 517 X 280 X 17 mm
Mass 1.6kg

Electrical Specifications
MODEL KC21T
Maximum Power 21W
Tolerance +15% / -5%
Maximum Power Voltage 17.4V
Maximum Power Current 1.21A
Open Circuit Voltage 21.7V
Short Circuit Current 1.30A
Dimension 367 X 512 X 17 mm
Mass 2.0kg

Efficiency %: 15
Size (L x W x H) (mm): 512 X 517 X 17
Weight (kg): 2.8
Max. Out Power (Watt): 32
Max. Power Voltage (VmpV): 17,4
Max. Power Current (Imp A): 1,84
Open circuit voltage (Voc V): 21,7
Short Circuit Current (ISC A): 1,99

Efficiency%: 15
Size (L x W x H) (mm): 652 X 639 X 54
Weight (kg): 5,0
Max. Out Power (Watt): 54
Max. Power Voltage (VmpV): 17,4
Max. Power Current (Imp A): 3,11
Open circuit voltage (Voc V): 21,7
Short Circuit Current (ISC A): 3,31

ELECTRICAL PERFORMANCE
PV Module Type KC65GX-2P
At 1000 W/m² (STC)*
Maximum Power [W] 65
Maximum System Voltage [V] 750
Maximum Power Voltage [V] 17.4
Maximum Power Current [A] 3.75
Open Circuit Voltage (VOC ) [V] 21.7
Short Circuit Current (ISC) [A] 3.99
DIMENSIONS 751 x 652 x 36mm
WEIGHT 6KG

ELECTRICAL PERFORMANCE
PV Module Type KC85
At 1000 W/m² (STC)*
Maximum Power [W] 85
Maximum System Voltage [V] 750
Maximum Power Voltage [V] 17.4
Maximum Power Current [A] 5.02
Open Circuit Voltage (VOC ) [V] 21.7
Short Circuit Current (ISC) [A] 5.34
DIMENSIONS 1007 x 652 x 36mm
WEIGHT 8.3KG

ELECTRICAL PERFORMANCE
PV Module Type KC135
At 1000 W/m² (STC)*
Maximum Power [W] 135
Maximum System Voltage [V] 1000
Maximum Power Voltage [V] 23.6
Maximum Power Current [A] 6.26
Open Circuit Voltage (VOC ) [V] 26.5
Short Circuit Current (ISC) [A] 6.98
DIMENSIONS 1338 x 990 x 46mm
WEIGHT 16KG

ELECTRICAL PERFORMANCE
PV Module Type KD210
At 1000 W/m² (STC)*
Maximum Power [W] 210
Maximum System Voltage [V] 1000
Maximum Power Voltage [V] 26.6
Maximum Power Current [A] 7.9
Open Circuit Voltage (VOC ) [V] 33.2
Short Circuit Current (ISC) [A] 8.58
DIMENSIONS 1500 x 990 x 46mm
WEIGHT 18KG

ELECTRICAL PERFORMANCE
PV Module Type KD70
At 1000 W/m² (STC)*
Maximum Power [W] 70
Maximum System Voltage [V] 750
Maximum Power Voltage [V] 17.9
Maximum Power Current [A] 3.13
Open Circuit Voltage (VOC ) [V] 22.1
Short Circuit Current (ISC) [A] 4.3
DIMENSIONS 778 x 660 x 44mm
WEIGHT 6.5KG

ELECTRICAL PERFORMANCE
PV Module Type KD95
At 1000 W/m² (STC)*
Maximum Power [W] 95
Maximum System Voltage [V] 750
Maximum Power Voltage [V] 17.9
Maximum Power Current [A] 5.31
Open Circuit Voltage (VOC ) [V] 22.1
Short Circuit Current (ISC) [A] 5.81
DIMENSIONS 1043 x 660 x 44mm
WEIGHT 8.5KG

HSG1200 is also ideal for hospitality application. For example, a hotel can use the service zone feature to separate the privileges of staff, guest, and VIP usage for accessing Internet.

The HSG1200′s built-in on-demand account generation capability is easy to use by cashiers or receptionists. Each guest account is associated to a price and a usage quota, either by time or volume. Moreover, HSG1200 works with the existing RADIUS server, if central billing had been implemented by the operator.

Easy Installation and Operation

• Supports various broadband deployment options (T1, DSL, Cable) via static IP, DHCP, PPPoE, and PPTP
• Built-in user database provides sufficient account capacity for different operation scenarios
• Works with instant account generator to provide user accounts for visitor-based, on-demand operations
• Load balancing and WAN failover enhance bandwidth utilization and provide more reliable Internet connection

Integrated Security Features

• Standard-based data encryption and user authentication: SSL, IEEE 802.1X, WPA-RADIUS
• Secure guest and administrator access using web-based login and administration over SSL
• Configurable packet filtering policies enhance data traffic security
• Built-in DoS protection prevents malicious hackers from collapsing the network

Effective User Management

• Complete authentication mechanism blocks unauthenticated users from gaining access to the network
• Role-based and policy-based control policies enhance the protection against malicious users
• “On-line user list” monitors real-time status of each individual user
• Allows session expiration control for On-demand users by time and data volume

Flexible Accounting and Billing

• Programmable billing profiles allow operators to customize the billing plans for On-demand users
• Bandwidth control enables class of service for different levels of users and maximize profits
• RADIUS VSA (Vendor Specific Attributes) implementation adds flexibility for accounting and session control using RADIUS server
• Detailed per-user traffic history log for analysis and record keeping
• Billing report gives a summary of transaction records for On-demand users

Networking

• Supports Router, NAT mode
• Supports static IP, DHCP, PPPoE, PPTP Dial-up
• Supports IP Plug and Play (IP PnP)
• Built-in DHCP Server and support for DHCP relay
• Supports NAT:
• IP/Port Destination Redirection
• DMZ Server Mapping
• Virtual Server Mapping
• Configurable static route
• Supports email service via designated email server
• Supports Walled Garden
• Walled Garden Advertisement List enables advertisement website links on login portal page
• Supports MAC Address Pass-Through
• Supports HTTP Proxy
• Supports Ethernet connection to external terminal servers
• Support dual uplinks, outbound load balancing and failover for more reliable Internet connection
• Support SIP pass-through NAT

Security

• Supports security standards: SSL, IEEE 802.1X and WPA-RADIUS
• Supports VPN Pass-Through (IPSec and PPTP)
• Built-in DoS attack protection
• Supports site-to-site VPN tunnel
• Supports MAC Access Control List
• Configurable user Black List
• Allows MAC address and user identity binding for local user authentication

Service Zones

• The network is divided into maximum 9 Service Zones, each defined by a VLAN tag
• Each service zone has its own
• login portal page
• authentication options
• LAN interface IP address
• DHCP address range
• Each service zone allows access to the selected groups
• Each service zone assigns a network policy to each user group

User Management

• Supports 3,000 local accounts
• Supports 2,000 on-demand accounts
• Simultaneous support for multiple authentication methods (Local and On-demand accounts, POP3, LDAP, RADIUS, NT Domain)
• Policy-based access control (per-role assignments based on Firewall Policies, Routing, Login Schedule, Bandwidth, Quota, and Session)

1. User Session Management:
2. SSL protected login portal page
3. Supports multiple logins with one single account
4. Session idle timer
5. Session and account expiration control
6. Notification email to provide a hyperlink to login portal page
7. Supports Single Sign-On for Windows Domain
8. Login time frame control
9. Session limit

Accounting and Billing

• Provides billing plans for On-demand accounts
• Enables session expiration control for On-demand accounts by time (hour) and data volume (MB)
• Detailed per-user traffic history based on time and data volume for both local and On-demand accounts
• Traffic history report in an automatic email to administrator
• Supports RADIUS VSA (Vendor Specific Attributes) implementation for traffic accounting and session control
• Supports credit card payment via external payment gateways (Authorize.Net, PayPal, SecurePay, WorldPay)

System Administration

• Web-based management UI
• Customizable login and logout portal page
• Support for SNMP v1, v2c
• SSH remote management
• Remote firmware upgrade
• NTP time synchronization
• Menu driven console management interface
• Utilities to backup and restore the system configuration

Monitoring and Reporting

• Online status monitoring of users
• IP-based monitoring of devices
• WAN connection failure alert
• Supports external Syslog server for diagnosis and troubleshooting
• Supports user traffic history logging
• Supports user traffic session (TCP/UDP) logging
• Supports local user monthly usage report

Physical and Power

• Power Adapter: 100~240 VAC, 50/60 Hz
• Form Factor: 19” 1U Rack Mount
• Dimensions (W x D x H): 16.9″ x 6.1″ x 1.7″ (430 mm x 155 mm x 43 mm)
• Weight: 3.3 lbs (1.5 kg)

Hardware Specification

• WAN Ports: 2 x 10/100BASE-TX RJ-45
• LAN Ports: 4 x 10/100BASE-TX RJ-45
• Console Port: 1 x RS-232 DB9
• LED Indicators: 1 x Power, 1 x Status, 2 x WAN, 4 x LAN

Environment

• Operating Temperature: 0 ~ 40 °C
• Storage Temperature: -20 ~ 65 °C

Certifications

• CE, FCC
• RoHS compliant

Package Contents

• HS1200 x 1
• CD-ROM (User's Manual and QIG) x 1
• Quick Installation Guide (QIG) x 1
• Console Cable x 1
• Ethernet Cable x 1
• Straight-through Ethernet Cable x 1
• Power Adaptor (DC 12V) with Power Cord x 1
• Rack Mounting Bracket (with Screws) x 1

HSG3200 is also ideal for hospitality application. For example, a hotel can use the service zone feature to separate the privileges of staff, guest, VIP, and convention usage for accessing Internet.

The HSG3200′s built-in on-demand account generation capability is easy to use by cashiers or receptionists. Each guest account is associated to a price and a usage quota, either by time or volume. Moreover, HSG3200 works with the existing RADIUS server, if central billing had been implemented by the operator.

Caracteristici & Beneficii

Easy Installation and Operation

Supports various broadband deployment options (T1, DSL, Cable) via static IP, DHCP, PPPoE, and PPTP
Built-in user database provides sufficient account capacity for different operation scenarios
Works with instant account generator to provide user accounts for visitor-based, on-demand operations
Load balancing and WAN failover enhance bandwidth utilization and provide more reliable Internet connection
Integrated Security Features

Standards-based data encryption and user authentication: SSL, IEEE 802.1x, WPA-RADIUS
Secure guest and administrator access using web-based login and administration over SSL
Configurable packet filtering policies enhance data traffic security
Built-in DoS protection prevents malicious hackers from collapsing the network
Effective User Management

Complete authentication mechanism blocks unauthenticated users from gaining access to the network
Role-based and policy-based control policies enhances the protection against malicious users
“On-line user list” monitors real-time status of each individual user
Allows session expiration control for On-demand users by time and data volume
Flexible Accounting and Billing

Programmable billing profiles allow operators to customize the billing plans for On-demand users
Bandwidth control enables class of service for different levels of users and maximize profits
4ipnet RADIUS VSA (Vendor Specific Attributes) implementation adds flexibility for accounting and session control using RADIUS server
Detailed per-user traffic history log for analysis and record keeping
Billing report gives a summary of transaction records for On-demand users.

Call for Price Now

Pentru a deschide un magazin hotspot este de la varfurile degetelor cu HSG100 conectarea la conducta de Internet prin ADSL / cablu / satelit modem. HSG100, de asemenea, aduce un avantaj suplimentar - montare pe perete, rezistent la praf (iP50) carcasă metalică.

HSG100 este cel mai economic încă caracteristică-bogat Gateway hotspot wireless, mini-ţintă de dimensiuni de magazine care doresc să ofere mici, cu un singur punct de acces la Internet fără fir de serviciu. HSG100 este o alegere perfecta pentru incepatori, pentru a rula afaceri hotspot. Ea nu costa o avere pentru a cumpara o gramada de echipament, şi nici nu-l ia abilităţile de un expert pentru a lipi mai multe aplicaţii din freeware multiple. Pentru o auto-proprietar care detine una sau mai multe magazine mici, care serveşte de servicii de internet wireless este nici o magie prin HSG100. Multe auto-service magazine şi clinici stomatologice găsi un HSG100 în serviciu face ca timpul de aşteptare al clienţilor lor o briza. Mici magazine de cafea poate oferi timp de serviciu pe bază de cupoane de hotspot compliment sau plătite de ore, la usurinta. Pentru birourile mici, profesionale, cum ar fi firmele de contabilitate sau de drept care au nevoie de înalt nivel de securitate a reţelei, un HSG100 independent permite birouri pentru a oferi servicii de Internet a reuşit să clienţii lor sau vizitatori într-un mod izolat, gratuit, în timp ce prevenirea accesului neautorizat la siguranţă intranet.

Caracteristici & Beneficii

Uşor de instalare şi operare

Sprijini diferitele opţiuni de implementare în bandă largă (T1, DSL, cablu), prin intermediul IP static, DHCP si PPPoE
Punct de acces integrat permite acces Wi-Fi şi elimină necesitatea de dispozitiv suplimentar
Built-in baza de date de utilizator ofera capacitate de calcul suficientă pentru scenarii diferite de functionare
Lucrul cu generator de cont instant pentru a oferi conturi de utilizator pentru vizitator bazate pe cerere, la operaţiunile de
Caracteristici de securitate integrate

Bazată pe standarde de criptare a datelor de utilizator şi autentificare: WEP, WPA, WPA2, IEEE 802.1X
Comentarii sigure si de acces ca administrator folosind web-based de conectare şi administrare de peste SSL
Politicile configurabile de pachete de filtrare a spori securitatea datelor de trafic
Built-in de protecţie previne DoS hackeri malware de la prăbuşirea reţelei
Managementul eficient utilizator

Blocuri complete mecanism de autentificare neautentificat utilizatorilor de acces la reţeaua câştigă
Rolul politicilor şi bazate pe politica de control bazate pe îmbunătăţeşte protecţia împotriva utilizatorilor rău intenţionaţi
"On-line lista de utilizatori" monitorizează starea în timp real pentru fiecare utilizator individual
Permiteţi expirarea sesiunii de control pentru utilizatorii On-demand de baza de timp
Contabilitate flexibile şi de facturare

Profile programabile de facturare permite operatorilor de a personaliza planurile de facturare pentru utilizatori la cerere
Lăţime de bandă de control permite clasa de servicii pentru diferite niveluri de utilizatori şi maximiza profiturile
Detaliate pentru fiecare utilizator istorie jurnalul de trafic pentru analiza şi evidenţa

Feature-ambalate pentru funcţionarea hotspot, HSG200 vine cu built-in 802.11n/b/g punct de acces, serverul de web si pagini de web pentru clienţi să se autentifice, uşor de logo-branding de încărcare pentru un magazin de hotspot, simplu utilizator / vizitator instrument de management de cont, planuri de plată PayPal, card de gateway-ul de credit, busteni de trafic, schimbul de IP şi etc Echipat cu 4ipWES (Press-n-Connect), tehnologie, HSG200 este în măsură să stabilească o legătură automată WDS cu până la 2 puncte de acces la simpla apăsare a unui buton . Extinderea de acoperire a reţelei fără fir este o briza. Pentru a deschide un magazin hotspot este de la varfurile degetelor cu HSG200 conectarea la conducta de Internet prin ADSL / cablu / satelit modem. HSG200, de asemenea, aduce un avantaj suplimentar - montare pe perete, rezistent la praf (iP50) carcasă metalică.

Pentru o auto-proprietar care detine una sau mai multe magazine mici, care serveşte de servicii de internet wireless este nici o magie prin HSG200. Multe auto-service magazine şi clinici stomatologice găsi un HSG200 în serviciu face ca timpul de aşteptare al clienţilor lor o briza. Mici magazine de cafea poate oferi timp de serviciu pe bază de cupoane de hotspot compliment sau plătite de ore, la usurinta. Pentru birourile mici, profesionale, cum ar fi firmele de contabilitate sau de drept care au nevoie de înalt nivel de securitate a reţelei, un HSG200 independent permite birouri pentru a oferi servicii de Internet a reuşit să clienţii lor sau vizitatori într-un mod izolat, gratuit, în timp ce prevenirea accesului neautorizat la siguranţă intranet.

2.4GHz 2 x 2 MIMO antena câmp înlocuibilă şi compatibilă cu 802.11n/b/g

* Design Antenă Diversity îmbunătăţeşte fiabilitatea conexiunii de date pentru a îmbunătăţi capacitatea de transport.
* Două antene detasabile pentru o acoperire optimă wireless şi flexibilitate domeniul de înlocuire.
* Echipat cu o mare viteză IEEE interfaţă de reţea fără fir 802.11n/b/g, rate de transmisie de pana la 300Mbps.

Uşor de instalare şi operare

* Opţiuni de bandă largă de sprijin diferite de implementare (T1, DSL, cablu), prin intermediul IP static, DHCP si PPPoE.
* Punct de acces integrat permite acces Wi-Fi şi elimină necesitatea de dispozitiv suplimentar.
* Built-in baza de date de utilizator ofera capacitate de calcul suficientă pentru scenarii diferite de functionare.
* Lucrările la cerere generator de cont pentru a oferi conturi de utilizator pentru vizitator bazate pe cerere, operaţiuni.

Caracteristici de securitate integrate

* Bazat pe standarde de criptare a datelor de utilizator şi autentificare: WEP, WPA, WPA2, IEEE 802.1X.
* Comentarii sigură şi de acces ca administrator folosind web-based de conectare şi administrare de peste SSL.
* Politicile configurabile de pachete de filtrare a spori securitatea datelor de trafic
4ipWES (Press-n-Connect), cu buton permite rapid / auto link WDS.
* Built-in de protecţie previne DoS hackeri malware de la prăbuşirea reţelei.

Managementul eficient utilizator

* Blocuri complete mecanism de autentificare neautentificat utilizatorii să obţină acces la reţea.
* Rolul politicilor şi bazate pe politica de control bazate pe îmbunătăţeşte protecţia împotriva utilizatorilor rău intenţionaţi.
* "On-line lista de utilizatori" monitorizează starea în timp real pentru fiecare utilizator individual.
* Permite expirarea sesiunii de control pentru utilizatorii On-demand de baza de timp.

Contabilitate flexibile şi de facturare

* Profile programabile de facturare permite operatorilor de a personaliza planurile de facturare pentru utilizatori la cerere.
* Lăţime de bandă de control permite clasa de servicii pentru diferite niveluri de utilizatori şi maximiza profiturile.
* Detaliate pentru fiecare utilizator istorie jurnalul de trafic pentru analiză şi evidenţă.

4ipnet HSG200-P Wi-Fi hotspot Kit este un cost-eficient încă caracteristică-ambalate all-in-o soluţie pregătită pentru funcţionare punct de acces direct din cutie. Este soluţia cea mai economică pentru mediul de afaceri hotspot mini-scară. Compact HSG200 Gateway hotspot wireless, oferind IEEE 802.11n/b/g, 2 × 2 MIMO, Power over Ethernet (PoE), şi iP50 praf carcasa de metal, se adreseaza special mini-dimensiune de magazine care doresc să ofere mici, cu un singur punct de acces la internet wireless de serviciu. Cu baza de date de utilizator built-in şi a planurilor personalizate de facturare, acesta permite generarea cont la cerere, la casieria lui. Extindere a reţelei este simplă, cu HSG200; proprietarii hotspot-uri, care doresc pentru a extinde acoperirea wireless pot face acest lucru cu simpla atingere a unui buton, cu tehnologie de proprietate 4ipnet lui, 4ipWES de presă n-Connect pentru configurare uşoară WDS, HSG200 stabileşte automat o criptat AES legătură cu puncte de acces 4ipnet, efort şi extinderea reţelei în siguranţă.

4ipnet NetTicketGen Generator hotspot de reţea de vânzare bilete, constând din SDS100 Server dispozitiv inteligent şi POS-Printer PRT100, simplifică la cerere de creare a contului şi a proceselor de facturare, prin generarea cont de push-buton de imprimare şi primirea biletului. SDS100 generează conturile on-demand prin declanşarea planurile de facturare în HSG200 şi instrucţiuni pentru a imprima bilete PRT100 corespunzătoare de cont. Frontline hotspot operaţiune este imediat simplificată; Receptionere şi casieri poate oferi clienţilor sau oaspeţii care vizitează, cu încasări de acces prin apăsarea câtorva butoane pe SDS100, ocolind configurarea manuală a gateway-ului. Toate 4ipnet WHG / dispozitive de HSG sunt compatibile şi să se integreze uşor cu NetTicketGen; Fiecare WHG / HSG dispozitivul poate suporta simultan mai multe seturi NetTicketGen prin reţeaua locală.

A face un pic de bani de pe partea!

Păstraţi-vă clienţii fericiţi şi oaspeţi, în timp ce face un pic de bani pe o parte, oferindu-le acces la internet WiFi. Un sistem de ticketing WiFi pot avea grijă de tot de la facturare de securitate. Este HSG200 + SDS100 sistem de 4ipnet firmă puţin cunoscută suficient de bun pentru afacerea ta? Citeste recenzie nostru pentru a afla.

4ipnet lui HSG200 hotspot fără fir şi vânzarea biletelor de kit este o pereche mult mai grav aspect al produselor, atunci ZyXEL a sistemului de ticketing concurente. Se pare mai mult oamenilor de afaceri, cu un finisaj negru subevaluate. Kit-ul include router HSG200 şi controler SDS100 ticketing, la care vă conectaţi imprimanta cu condiţia bilet termică utilizând inclus RS-232 prin cablu. Atât HSG200 şi SDS100 sunt robuste, cu cazuri de oţel şi puncte de montare pentru a le face uşor de a asigura un perete sau birou. Chiar imprimanta bilet are un sentiment liniştitor solid să-l.

Principalul HSG200 unitate este relativ simplu, un router cu un port WAN, 2.4GHz, 300Mbit / s wireless 802.11n şi două porturi LAN 10/100Mbit/s - unul pentru reţeaua privată şi una pentru reţeaua publică. Mai important, precum şi reţelele simultane private şi publice, are o mulţime de opţiuni suplimentare care vă ajută să controlaţi sistemul de ticketing, de preţuri şi de procesare a plăţilor, dacă doriţi, pentru a permite utilizatorilor să cumpere accesul prin card de credit sau de debit.

SDS100 are butoane care vă permit să selectaţi de la până la zece planuri de bilete diferite - de tarifare şi durata fiecărui plan poate fi configurat pentru a se potrivi nevoilor dumneavoastră. Puteţi conecta mai multe unităţi de bilete la un singur HSG200 router, permiţând bilete pentru a fi vândute la casele de marcat sau de mai multe locaţii, dar veţi avea nevoie pentru a le conecta printr-un switch Ethernet la portul privat unic de reţea LAN.

Instalare şi configurare de bază a fost gratifyingly simplu, deşi unic privat portul LAN face puţin mai complicat decât trebuie să fie. Dacă nu aveţi un comutator, este recomandabil să se rezolve de configurare a router-ului iniţial printr-o conexiune LAN înainte de a conecta consola de ticketing.

Odată ce aţi rula prin intermediul router-ului expertul de simplu de configurare bazată pe web şi conectat la portul SDS100 privat LAN, sistemul este funcţional imediat, chiar dacă într-un fel de bază. Desigur, mai mult de configurare este absolut necesar, cum ar fi înfiinţarea setările dorite de securitate pentru reţele, atât publice cât şi private wireless - sugerăm WPA2 pentru reţeaua privată şi deschide pentru public o - poate efectua mai mult de configurare fără fir cu usurinta.

Un firewall de bază vă permite de a controla traficul în şi din reţeaua publică, care este de importanţă primară. Un tabel de rutare vă permite să configuraţi setările de NAT pentru rutare mai complicat, dar ne-ar recomanda oferind un sistem de acces oaspete al acestui tip de conexiune la internet proprie dedicată, fără acces la restul de reţea, mai degrabă decât folosind HSG200 să se ocupe de toate publice şi private, sigure cerinţele de rutare.

Alături de aceste caracteristici este o calitate frumos în aplicare a Service (QoS) de sistem, care vă permite să definiţi maximă de până în aval şi viteze de conectare pentru câteva tipuri diferite de câteva trafic, cum ar fi video şi voce. Există, de asemenea, sprijin pentru furnizorii de diferite DDNS, deşi nu recomandăm să permită accesul de la distanţă la aparat cu excepţia cazului în instrumente absolut necesare, precum şi o reţea de inspecţie şi de statutul de câteva.

Caracteristicile cele mai importante HSG200 sunt manipulate în meniul utilizatorilor de STI, în cazul în care clare sub-meniuri face uşor să atribui diferite tipuri de bilet de acces la fiecare dintre HSG200 de 10 opţiuni. Biletele pot fi definite cu durate diferite şi preţuri, puteţi alege, de asemenea, să le expire în anumite momente şi chiar încărca o imagine logo-ul pentru a fi imprimate pe biletele. Dacă setaţi un gateway de plată externă, oaspeţii se pot plăti pentru accesul de pe cardul lor de credit atunci când se conectează la reţeaua dvs., mai degrabă decât să cumpere un bilet în persoană la pana. Plata pot fi prelucrate prin intermediul Authorize.Net, PayPal, SecurePay sau WorldPay.

Cu hardware-ul mai puternic, WHG401 este capabilă să gestioneze centralizat 190 de puncte de acces (150 x 40 x + EAP700 alt singur 4ipnet radio, AP), pentru a acoperi o arie mai largă de servicii într-o reţea mai mică.

Simplificată de desfăşurare şi de încredere de conectare la Internet
Gigabit Ethernet pentru a satisface cerinţele de date mai mari rate de reţele mai mari
Usor de instalat, platforma extrem de scalabila permite suprapunere cu fir existente / infrastructura wireless, fără întrerupere
Load balancing şi failover WAN a spori utilizarea lăţimii de bandă şi oferă conexiune la Internet mai sigur
Capabilităţile de securitate puternice de reţea pentru aplicaţii de întreprindere
Bazat pe standarde de criptare a datelor: WEP, WPA, WPA2, IEEE 802.1x, IPSec VPN şi
Comentarii sigure si de acces ca administrator folosind web-based de conectare şi administrare de peste SSL
Diverse metode de autentificare ale utilizatorilor, inclusiv a construit-in baza de date locală şi la cerere; acceptă servere externe de autentificare, inclusiv POP3, LDAP, RADIUS, de domeniu Windows, şi grefierul SIP
Built-in DoS de protecţie păstrează hackerii de la prăbuşirea reţelei
Site-to-site tunele VPN permite de filiale pentru a conecta în siguranţă unul cu altul şi să împărtăşească acelaşi cont de date
Control acces cuprinzătoare şi de management utilizator
Rolul pe bază de control acces si oferta politica de gestionare a aplicării de privilegii pentru diferite grupuri de utilizatori
La cerere cont de generaţie oferă conturi securizate şi gestionate de utilizator pentru vizitatori
Serviciu de partiţii funcţie Zone o reţea de fizică în până la 9 reţele virtuale, fiecare cu propriu de control acces poate fi definit şi profiluri de politică de grup. Permite proprietarilor de hotspot-uri pentru a oferi diferite niveluri de servicii personalizate
Individual limita de lăţime de bandă de utilizator permite un control flexibil al traficului, pentru diferite scenarii
Punctul de acces centralizat (AP) de management
Centralizat de la distanţă şi de control automat AP descoperire
Management şi monitorizare a AP a reuşit prin interfata de administrare web-based, inclusiv setările de sistem AP, starea online, care să permită / dezactivarea, reseta, si upgrade de firmware
Monitorizează periodic AP şi notifică administratorul de AP-uri problematice
Contabilitate flexibile şi uşor de facturare
Profile configurabile de facturare permite operatorilor de a personaliza planurile de facturare pentru utilizatori la cerere
Suport plata online cu card de credit prin intermediul Authorize.net, PayPal şi SecurePay
Suport pentru Servicii de Hotspot bazate pe locaţie şi pagini personalizabile Web UAM
Conceptul logică a Serviciului Zona permite controler pentru a diferenţia clienţii de locaţii şi de a oferi utilizatorilor experienţe diferite (cum ar fi paginile de conectare diferite) şi politici de reţea
Când cuplare cu switch-uri VLAN şi dispozitive de DSLAM, Controller-ul poate utiliza caracteristica de maparea portului pentru a spune locaţia a fiecărui client şi să ofere, prin urmare, de servicii diferenţiate. De exemplu, un oaspete al hotelului, nu ar trebui să tastaţi din nou parola în fiecare dată când accesul la internet în cameră
Prin crearea mai multe zone de servicii şi utilizarea de pagini personalizate sau pagini externe, un singur operator poate servi mai multe francize de hotspot-uri transparent pentru clienţi
Integrare PMS pentru aplicaţii hotel
Prin interfaţa middleware 3rd party - NetRetriever, controller este capabil de a posta informaţii de facturare pentru mai multe tipuri de camere, inclusiv PMSs Micros Fidelio / Operă, HiRUM, RMS, Hospitality CMS, EzyRez, RoomMaster2000, diagrame şi etc
Un oaspete al hotelului poate obţine un cont de acces la Internet la check-in, sau sa te inregistrezi pentru serviciul de acces la internet în cameră, oricând, fără ajutorul a grefierilor. Cu integrarea PMS, oaspetele va primi o factură cameră single
Cu un singur cont, un oaspete vor putea accesa Internetul prin cablu în cameră, sau prin conexiune fără fir oriunde în gama de servicii de AP conectare la controler

Cerere de preţ acum

WHG505 is capable of centrally managing 230 access points (150 x EAP700 + 80 x other 4ipnet single radio AP) to cover a wider service area in a smaller network.

WHG505 – Secure WLAN Controller
Simplified Deployment and Reliable Internet Connection
Gigabit Ethernet to meet higher data rate demands of larger networks
Easy to deploy, highly scalable platform allows overlay with existing wired/wireless infrastructure without disruption
Load balancing and WAN failover enhance bandwidth utilization and provide more reliable Internet connection
Powerful Network Security Capabilities for Enterprise Applications
Standards-based data encryption: WEP, WPA, WPA2, IEEE 802.1X, and IPSec VPN
Secure guest and administrator access using web-based login and administration over SSL
Diverse user authentication methods, including built-in Local and On-demand database; supports external authentication servers including POP3, LDAP, RADIUS, Windows Domain, and SIP registrar
Built-in DoS protection keeps malicious hackers from collapsing the network
Site-to-site VPN tunnels allow branch offices to securely connect with one another and share the same account database
Comprehensive Access Control and User Management
Role-based access control and policy enforcement offer management of privileges for different user groups
On-demand account generation provides secure and managed user accounts to visitors
Service Zone function partitions a physical network into up to 9 virtual networks, each with its own definable access control and group policy profiles. Allows hotspot owners to provide various levels of customized services
Individual user bandwidth limit enables flexible traffic control for different scenarios
Centralized Access Point (AP) Management
Centralized remote control and automatic AP discovery
Management and monitoring of managed APs via web-based administration interface, including AP's system settings, online status, enabling/disabling, reset, and firmware upgrade
Periodically monitors APs and notifies the administrator of problematic APs
Flexible Accounting and Easy Billing
Configurable billing profiles allow operators to customize billing plans for on-demand users
Support online payment with credit card through Authorize.net, PayPal and SecurePay
Support for Location-Based Hotspot Services and Customizable UAM Web Pages
The logical concept of Service Zone allows the Controller to differentiate clients by locations and to provide different user experiences (such as different login pages) and network policies
When coupling with VLAN switches and DSLAM devices, the Controller can use its Port Mapping feature to tell the location of each client and therefore provide differentiated services. For example, a hotel guest would not need to type in the password again every time when accessing the Internet in room
By setting up multiple Service Zones and utilizing customized pages or external pages, a single Controller can serve multiple hotspot franchises transparently to the clients
PMS Integration for Hotel Applications
By interfacing the 3rd party middleware – NetRetriever, the controller is able to post billing information to multiple kinds of hotel PMSs, including Micros Fidelio/Opera, HiRUM, RMS, CMS Hospitality, EzyRez, RoomMaster2000, Charts and etc
A hotel guest can obtain an Internet access account at check-in counter, or sign up for the Internet access service in room anytime without the help of clerks. With PMS integration, the guest will receive a single room bill
With a single account, a guest will be able to access the Internet by wire in room or by wireless connection anywhere within the service range of APs connecting to the Controller

Call for Price Now

Primary Function: Waterproof IP Security Camera with WIFI and Night Vision
Day and night vision with 48 IR LED's (night visibility up to 20 meters)
Multi-level users access and management with password protection.
Allows remote viewing video and record from any internet connection.
Wi-Fi compliant with IEEE 802.11b/g on 2.4 Ghz ISM frequency band.

Connector Type: N plug to NB/H jack
Impedance: 50Ω
Frequency Range: DC ~ 6GHz
VSWR:
1.17 at 2.19GHz
1.24 at 5.61GHz
Insertion Loss: 0.62dB max
0.297dB at 2.48GHz
0.614dB at 5.89GHz
DC Breakdown Voltage: 90V ± 20%
Insulation Resistance: > 10,000MΩ
Impulse Breakdown Voltage: 10KV min (1.2/50μS waveform)
Maximum Withstand Current: 5KA min (8/20μS waveform)

• Frequency Range: 5.1Ghz – 5.9Ghz
• Antenna Gain: 8dBi
• Polarization: Vertical, Omni-Directional
• VSWR: < 1.5 : 1
• Maximum Input Power: 50 watts
• Vertical Beamwith: 17 degrees
• Horizontal Beamwidth: 360 degrees
• Impedance: 50 ohms
• Dimension: 375mm(L) x 17mm(D)
• Weight: 200g
• Connector Type: N-Type Male
• Housing Material Fiberglass
• Operating Temperature -40°C to +80°C

Caracteristici:

1. Grid Parabolic Antenna
2. Working on 5.5~5.835GHz
3. High 27dbi gain to extend coverage
4. Provide pole mounting
5. H-Plane 8.5° / E-Plane 6.6°

Specificatii:

Frequency 5.5 ~ 5.835GHz
Type Grid
Polarization Vertical
Gain 27dBi
VSWR ≦2.0
Beam Width H-Plane 8.5° E-Plane 6.6°
Impedance 50Ω± 5Ω
Connector Type N Type (Female)

Environmental & Mechanical Characteristics

Temperature -30℃ ~ +60℃
Lightning Protection DC Ground
Radome ABS
Dimensions ∮150×600mm
Weight 2860g±50g (w/mount)

ANT-OD-242505M 2.4GHz – 2.5GHz 5dBi Mesh Omni-Directional Antenna
Frequency Range: 2.4GHz – 2.5GHz
Antenna Gain: 5dBi
Polarization: Vertical, Omni-Directional
VSWR: ≤ 1.5 : 1
Maximum Input Power: 50 watts
Vertical Beamwidth: 20 degrees
Horizontal Beamwidth: 360 degrees
Impedance: 50 ohms
Dimension: 330mm(L) x 17mm(D)
Weight: 85g
Connector Type: N-Type Male
Housing Material: Fiberglass
Operating Temperature: -40°C to +80°C

Caracteristici:

1. Grid Parabolic Antenna
2. Working on 2400MHz
3. High 24dbi gain to extend coverage.
4. Pole mounting supplied.

Specificaţie

Frequency 2400 ~ 2500MHz
Type Grid Parabolic
Polarization Linear, Horizontal / Vertical
Gain 24dBi
VSWR 2.0:1
Beam Width H-Plane 9° E-Plane 11°
Impedance 50Ω
Connector Type N-type(female)

Environmental & Mechanical Characteristics

Temperature -40 to 85℃
Lightning Protection DC Ground
Radome ABS, UV resistant
Dimensions 1000 x 600 mm
Weight 5 kg

By supporting 802.1p/802.1Q QoS and 802.11e WMM, EAP100 ensures the quality of communication for multimedia applications like voice, audio and video. The dual IEEE 802.3af PoE compliant design not only provides both data transfer and power supply through the same Ethernet cable but supports redundant connectivity with failover function.

Caracteristici & Beneficii

High Speed IEEE 802.11g and Backward Compatible with 802.11b

Equipped with a high-speed IEEE 802.11g wireless network interface based on Atheros™ chipset, transmission rates up to 54Mbps
WDS Repeater for Extending Wireless Coverage

Creates structural WDS (Bridge or Repeater) links connecting to other WDS-capable APs
Repeater links can serve as EAP100′s LAN connections to replace Ethernet ports, or simply bridge the wired side and the wireless side as a single network
Supporting QoS & 802.11e WMM

Supports IEEE 802.1p/IEEE 802.1Q Quality of Service (QoS) tagging features
Supports IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty multimedia applications like voice, audio and video
Business-class WLAN Security & Client Authentications

Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key)
Wireless LAN segmentation, Disable SSID Broadcast and the option of station-isolation
Ability to be configurable to filter out unauthorized wireless clients with build-in MAC-based access control list or via a back-end RADIUS server by sending an authentication request
Support business-class WLAN security, multiple-SSID, and VLAN tagging

Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key).
Support multiple ESSIDs and VLAN tagging.
MAC ACL list & RADIUS client support for filtering out unauthorized wireless clients.
Multiple Virtual APs & Capability of Client Isolation

One EAP100 can emulate up to 8 Virtual APs (VAP), each with its own ESSID; namely, one AP can have 8 ESSIDs
Each VAP appears to clients as an independent AP and its traffic and be associated with a VLAN ID
Supports client isolation, isolated from each other under one AP
Wall mountable Dust-proof Metal Housing

Enclosed in a metal housing, durable and non-fire hazard for the industrial environment
Dual-PoE with Link Failover

The IEEE 802.3af Power over Ethernet (PoE) compliant design eliminates the need for power sockets, allows installation of this device in areas where power outlets are not readily available to improve deployment flexibility, and provides standard based compatibility with other device
Provides dual-PoE 10/100 Fast Ethernet ports with failover function for redundant connectivity

EAP300 comes with all standards demanded by enterprise applications, including business-grade security (802.1X, WPA and WPA2), and multiple ESSIDs with VLAN tags to separate the traffics of different departments. Beyond common expectations, EAP300's real surprise is the patent-pending WES (Press-n-Connect) technology. Bridging multiple EAP300s is at the touch of a button with 4ipWES, which enables a quick and automatic WDS Easy Setup by pressing the WES button on EAP300. Extending wireless network coverage is a breeze. Supporting up to 300Mbps wireless speed with its 802.11n 3×3 MIMO solution, and a gigabit Ethernet interface, EAP300 is perfect for bandwidth-hungry applications such as video surveillance, multi-media streaming over wireless. The QoS – WMM ensures the quality of voice/video when multiple applications are transmitting media and data over the air simultaneously. EAP300′s higher throughput, security and durability make it a perfect choice of wireless connectivity for your business.

Caracteristici & Beneficii

Dual-band 3 x 3 MIMO Field Replaceable Antenna & Backward Compatible with 802.11a/b/g

The antenna diversity design enhances the connection reliability to improve data transmission capability
Three detachable high-gain antennas for optimal wireless coverage and field replaceable to meet customer demands for specific environment
Equipped with a high-speed IEEE 802.11n/a/b/g wireless network interface, transmission rates up to 300Mbps
WDS/Repeater for Extending Wireless Coverage

Creates structural WDS (Bridge or Repeater) links connecting to other WDS-capable APs
Repeater links can serve as EAP300′s LAN connections to replace Ethernet ports, or simply bridge the wired side and the wireless side as a single network
Supporting QoS & 802.11e WMM

Supports IEEE 802.1p/IEEE 802.1Q Quality of Service (QoS) tagging features
Supports IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty multimedia applications like voice, audio and video
Business-class WLAN Security & Client Authentications

Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key)
Wireless LAN segmentation, Disable SSID Broadcast and the option of station-isolation
4ipWES (Press-n-Connect) with push button enables quick/auto WDS link
Ability to be configurable to filter out unauthorized wireless clients with build-in MAC-based access control list or via a back-end RADIUS server by sending an authentication request
Multiple Virtual APs & Capability of Client Isolation

One EAP300 can emulate up to 8 Virtual APs (VAP), each with its own ESSID; namely, one AP can have 8 ESSIDs
Each VAP appears to clients as an independent AP and its traffic and be associated with a VLAN ID
Supports client isolation, isolated from each other under one AP
Wall mountable Dust-proof Metal Housing

Enclosed in a metal housing, durable and non-fire hazard for the industrial environment
Gigabit Ethernet port with PoE

The IEEE 802.3af Power over Ethernet (PoE) compliant design eliminates the need for power sockets, allows installation of this device in areas where power outlets are not readily available to improve deployment flexibility, and provides standard based compatibility with other device
Provides 10/100/1000 Gigabit Ethernet port, matching the wire and wireless throughput.

It has the interfaces to serve both wireless and wired LAN access. The simplistic yet chic design of EAP700 allows it to blend into a working or a living environment practically and elegantly. By utilizing PoE, EAP700 comes with an advantage of running fewer cables in the duct. The Power over Ethernet (PoE) LAN port on the EAP700 serves as the power feed as well as the wired network feed. Optionally, it can also be powered via an AC adapter when PoE switch is not available.

Standalone, EAP700 is an easy-to-install and cost-effective solution for most of indoor wireless deployments, including hotel rooms, apartments, offices, classrooms, libraries, private homes, public kiosks, etc. When working under one of 4ipnet Controllers, the combined network turns into an intelligent building solution, a managed internet service, or a Wi-Fi hotspot network of various scales. Multi-pack is available at lower cost to contractors/builders for larger deployments.

Caracteristici & Beneficii

Hidden in-the-wall behind faceplate, blending well into most of interior/architectural designs

Clean and stylish look. The main unit fits in a standard size outlet box, hidden behind the wall-jack faceplate.
The faceplate is a two-piece design, slide-able for adjusting the depth of the portion that goes in-the-wall, and for covering the mistakes around the cut-out hole.
Easy to install, fewer cables to run, flexible power feed options, meeting building codes

The IEEE 802.3af Power over Ethernet (PoE) eliminates the need for power sockets, allowing installation of this device in areas where power outlets are not readily available to improve deployment flexibility.
Using a single CAT5e cable feed both power and Ethernet data. Optional AC power feed is available.
High speed interface and QoS/WMM support,ideal for voice, video, and data applications

Equipped with a powerful, high-speed IEEE 802.11b/g wireless interface and hidden 2.4GHz antenna.
With the additional QoS/WMM support, EAP700 is ideal for converged voice, video, and data applications.
Connections for both wireless and wired clients

Keep the style of a simple LAN wall jack while being able to serve both LAN and WLAN devices.
Support business-class WLAN security, multiple-SSID, and VLAN tagging

Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key).
Support multiple ESSIDs and VLAN tagging.
MAC ACL list & RADIUS client support for filtering out unauthorized wireless clients.
Flexible deployment – standalone, or managed in an intelligent building solution

Stand-alone, EAP700 is a full AP (without router), normally chained from a modem router to service clients.
WDS links can be established to bridge other APs for extending WLAN coverage.
Supports client isolation, important in a hotspot or hospitality environment.
When managed under a 4ipnet Controller, such as the WHG-series, the combination has been pre-integrated to provide solutions for many applications.

EAP200 makes the wireless communication fast, secure and easy. It supports business grade security such as 802.1X, and Wi-Fi Protected Access (WPA and WPA2). By pushing a purposely built button, 4ipWES (Press-n-Connect) feature makes it easy to bridge wireless links of multiple EAP200s for forming wider wireless network coverage. EAP200 also features multiple ESSIDs with VLAN tags; one EAP200 can emulate up to eight Virtual APs, great for enterprise applications, such as separating the traffics of different departments using different ESSIDs.

Supporting up to 300Mbps wireless speed with its 802.11n 2 x 2 MIMO solutions, EAP200 is perfect for bandwidth-hungry applications such as video surveillance, multimedia streaming over the wireless links. Its QoS – WMM feature ensures the quality of voice/ video when multiple applications are transmitting media and data over the air at the same time.

EAP200's higher throughput, security and durability make it a perfect choice of wireless connectivity for your applications.

2.4GHz 2 x 2 MIMO Field Replaceable Antenna & Backward Compatible with 802.11n/b/g
The antenna diversity design enhances the connection reliability to improve data transmission capability
Two detachable antennas for optimal wireless coverage and field replacement flexibility
Equipped with a high-speed IEEE 802.11n/b/g wireless network interface, transmission rates up to 300Mbps
WDS/Repeater for Extending Wireless Coverage
4ipWES (Press-n-Connect) with push button enables quick/auto WDS link
Creates structural WDS (Bridge or Repeater) links connecting to other WDS-capable APs
WDS links can serve as EAP200′s LAN connections to replace Ethernet ports, or simply bridge the wired side and the wireless side as a single network
Supporting QoS & 802.11e WMM
Supports IEEE 802.1p/IEEE 802.1Q Quality of Service (QoS) tagging features
Supports IEEE 802.11e Wireless Multi-Media to fulfill bandwidth thirsty triple-play (voice, audio and video) applications
Business-class WLAN Security & Client Authentications
Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK (Pre-Shared Key)
Wireless LAN segmentation, Disable SSID Broadcast and the option of station-isolation
Configuration-capable to filter out unauthorized wireless clients with build-in MAC-based access control list or via a back-end RADIUS server by sending an authentication request
Multiple Virtual APs & Capability of Client Isolation
One EAP200 can emulate up to 8 Virtual APs (VAP), each with its own ESSID; namely, one AP can have 8 ESSIDs.
Each VAP appears to clients as an independent AP and its traffic and be associated with a VLAN ID.
Supports client isolation, isolated from each other under one AP
Wall mountable Dust-proof Metal Housing
Enclosed in a metal housing, durable and non-fire hazard for the industrial environment
Dual-PoE with Link Failover
The IEEE 802.3af Power over Ethernet (PoE) compliant design eliminates the need for power sockets, allows installation of this device in areas where power outlets are not readily available to improve deployment flexibility, and provides standard based compatibility with other device
Provides dual-PoE 10/100 Fast Ethernet ports with failover function for redundant connectivity.

Technical specifications Peripheral type Wireless router
Standards 802.11b/g/n (Draft)
Transfer rate 300 Mbps
Frequency range 5 GHz
Routing protocols TCP/IP
Safety features IP access control list
SPI firewall
Content filtering
IPS (Intrusion Prevention System)
Management features SNMP version 1, 2c
Antenna 3
Dimensions 198 x 131 x 198 mm
Weight 0.55 kg
Contents WRVS4400N router, CD-ROM with user manual and QuickVPN software, network cable, power adapter, set-up guide

Technical Specifications Norm IEEE 802.11b, IEEE 802.3af, IEEE 802.11g
Transfer Speed 108 Mbps
Encrypting WEP 64-Bit/128-Bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT
Antenna 2 detachable aerials
Ethernet Power over Ethernet
Size 170 x 205 x 195 mm
Weight 400g
Included Accessories 2 detachable aerials, CD-Rom, Ethernet cable, mains power supply, registration card.

General Device Type Radio access point
Width 17 cm
Depth 4.1 cm
Height 17 cm
Weight 390 g
Networking Form Factor External
Connectivity Technology Wireless
Data Transfer Rate 300 Mbps
Line Coding Format OFDM
Data Link Protocol IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft)
Spread Spectrum Method OFDM, DSSS
Network / Transport Protocol DHCP
Remote Management Protocol SNMP 1, SNMP 2c, HTTP, HTTPS
Frequency Band 2.4 GHz
Status Indicators Link activity, power, link OK
Features DHCP support, power over Ethernet (PoE), load balancing, VLAN support, Syslog support, E-mail alert, MAC address filtering, IPv6 support, firmware upgradable, MIMO technology, Wi-Fi Multimedia (WMM) support, event log, Quality of Service (QoS), RADIUS support, Wi-Fi Protected Setup (WPS)
Encryption Algorithm 128-bit WEP, 64-bit WEP, WPA, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise
Authentication Method Radio Service Set ID (SSID), Basic Service Set Identifier (BSSID)
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.1p, IEEE 802.11b, IEEE 802.3af, IEEE 802.11d, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11n (draft), Wi-Fi Protected Setup
Aerial Antenna External detachable
Antenna Qty 3
Directivity Omni-directional
Gain Level 2 dBi
Expansion / Connectivity Interfaces 1 x network / power – Ethernet 10Base-T/100Base-TX/1000Base-T – RJ-45
Miscellaneous Cables Included 1 x network cable
Compliant Standards CE, IC, FCC
Power Power Over Ethernet (PoE) Yes
Power Device Power adapter – external
Software / System Requirements OS Provided Linux
Environmental Parameters Min Operating Temperature 0 °C
Max Operating Temperature 40 °C
Humidity Range Operating 10 – 85%

General Device Type Wireless router
Form Factor External
Memory RAM 64 MB
Flash Memory 32 MB
Networking Connectivity Technology Wireless, wired
Integrated Switch 4-port switch
Data Link Protocol Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Switching Protocol Ethernet
Network / Transport Protocol TCP/IP, UDP/IP, L2TP, PPPoE
Routing Protocol RIP-1, RIP-2, IGMPv2, IGMP, static IP routing, IGMPv3, GRE
Remote Management Protocol SNMP 2, HTTP, HTTPS
Capacity IPSec VPN tunnels : 5
Status Indicators Port status, power
Features NAT support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), Syslog support, traffic shaping, Stateful Packet Inspection (SPI), DoS attack prevention, VPN passthrough, URL filtering, Low-latency queuing (LLQ), Weighted Fair Queuing (WFQ), Wi-Fi Multimedia (WMM) support, Access Control List (ACL) support, Quality of Service (QoS), Wi-Fi Protected Setup (WPS), DHCP server, wireless bridge mode
Compliant Standards IEEE 802.1Q, IEEE 802.11b, IEEE 802.11g, IEEE 802.11i, Wi-Fi CERTIFIED, IEEE 802.11n
IP Telephony VoIP Functionality VoIP phone adapter
VoIP Protocols SIP v2
Voice Codecs G.711, G.723.1, G.726
Telephony Interfaces 2 phone (FXS), 1 line (FXO)
IP Telephony Features Echo cancellation, comfort noise generation (CNG), voice activity detection (VAD), Caller ID, call waiting, call hold, call transfer, silence suppression, DTMF generation/detection
Aerial Aerial External integrated
Antenna Qty 1
Gain Level 2.2 dBi
Expansion / Connectivity Interfaces 4 x network – Ethernet 10Base-T/100Base-TX – RJ-45 ¦ 1 x network – Ethernet 10Base-T/100Base-TX – RJ-45 ( WAN ) ¦ 1 x phone line – FXO – RJ-11 ¦ 2 x phone line – FXS – RJ-11 ¦ 1 x Hi-Speed USB – 4 PIN USB Type A
Miscellaneous Cables (Details) 1 x network cable ¦ 1 x phone cable
Encryption Algorithm Triple DES, 128-bit WEP, 64-bit WEP, TKIP, WPA, WPA2
Authentication Method RADIUS, Radio Service Set ID (SSID)
Compliant Standards ETSI, CISPR 24, EN 61000-3-2, ICES-003, EN 61000-3-3, EN55024, CISPR 22, EN50082-1, AS/NZS 60950-1, RSS-210, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, FCC Part 15, CS-03, EN 61000-4-5, EN 61000-6-2, EN 61000-4-11, FCC CFR47 Part 15, EN300-386, EN 61000-4-8, UL 60950-1, IEC 60950-1, EN 60950-1
Power Power Device Power adapter – external
Voltage Required AC 120/230 V
Software / System Requirements Software Included Drivers & Utilities
Environmental Parameters Min Operating Temperature 0 °C
Max Operating Temperature 40 °C
Humidity Range Operating 5 – 95%

When operating in CPE (Client) mode, it functions as a Wi-Fi modem gateway to receive wireless signal over the last-mile Internet feed from WISPs. The CPE's bandwidth to the Internet can be assigned by the WISP. When in AP mode, OWL510 operates as an AP station with wall-penetrating high-power signal and long-range coverage to better serve Wi-Fi clients. In addition, it can be set up as a WDS-mesh node by establishing multiple WDS links to bridge neighbor access points together. Coming with business-class security, OWL510 in AP mode is also ideal for enterprise applications. Furthermore, one OWL510 with multiple SSIDs is capable of acting as multiple Virtual APs (VAPs). By tagging the traffic from each VAP with a unique VLAN ID, it allows for segmenting a corporate network using VLANs to protect critical resources. Being a versatile Wi-Fi device, OWL510 does not limit itself to outdoor usage only. When managed by a Controller (such as the WHG-series), it performs as a Wi-Fi base station in either a public or private wireless access deployment.

Caracteristici & Beneficii

Rugged, Compact-Sized, and Adaptive to Versatile Environments

Diversified deployments:
Municipal Wi-Fi service
Home Ower Association (HOA), RV parks, and recreation resorts
Hotels, mobile hospitals, and mobile libraries
Shopping malls, airports, harbors, roadways, warehouse, and manufacturing plants
IP68 weather- and water-proof
Housed in durable, rust-resistant metal casing
High Transmit Power and Built-in Patch Antenna

Up to 500mW output power from the board to transmit stronger signals for longer range
Built-in patch antenna for installation convenience and efficiency
LED indicators to display wireless signal strength
High-speed with QoS for Voice, Video, and Data Applications

Equipped with a high-speed IEEE 802.11g wireless network interface based on Atheros™ chipset, transmit rates up to 54Mbps
Backward compatible with 802.11b
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty triple-play (voice, video, and data) applications
Power over Ethernet (PoE) & Flexible Mounting Options

PoE feature reduces the need of additional power cable to the device; a quality Power Supply Equipment (PSE) is bundled in the package
Wall and pole mountable; mounting kit included
Multiple Operation Modes for Different Infrastructures

Two administrator accounts – one for WISP to manage wireless broadband subscribers
Multiple operation modes:
CPE Mode – wireless modem with IP sharing
AP Mode – pure AP
WDS Mode – AP with wireless bridge
Universal Repeater Mode – with MAC NAT
Business-class Security and Multiple-SSID/ VLAN tagging Support

Full range of enterprise-grade wireless security mechanisms such as WEP, WPA and WPA2 (802.11i)
Multiple-SSID capability enables one OWL510 to behave like up to 8 unique Virtual APs (VAPs), the equivalent of 8 wireless Virtual LANs (VLANs) to securely segment wireless network traffic
Support client isolation in public hotspot operation.

When operating in CPE (Client) mode, it functions as a Wi-Fi modem gateway to receive wireless signal over the last-mile Internet feed from WISPs. The CPE's bandwidth to the Internet can be assigned by the WISP. When in AP mode, OWL510 operates as an AP station with wall-penetrating high-power signal and long-range coverage to better serve Wi-Fi clients. In addition, it can be set up as a WDS-mesh node by establishing multiple WDS links to bridge neighbor access points together. Coming with business-class security, OWL510 in AP mode is also ideal for enterprise applications. Furthermore, one OWL510 with multiple SSIDs is capable of acting as multiple Virtual APs (VAPs). By tagging the traffic from each VAP with a unique VLAN ID, it allows for segmenting a corporate network using VLANs to protect critical resources. Being a versatile Wi-Fi device, OWL510 does not limit itself to outdoor usage only. When managed by a Controller (such as the WHG-series), it performs as a Wi-Fi base station in either a public or private wireless access deployment.

Caracteristici & Beneficii

Rugged, Compact-Sized, and Adaptive to Versatile Environments

Diversified deployments:
Municipal Wi-Fi service
Home Ower Association (HOA), RV parks, and recreation resorts
Hotels, mobile hospitals, and mobile libraries
Shopping malls, airports, harbors, roadways, warehouse, and manufacturing plants
IP68 weather- and water-proof
Housed in durable, rust-resistant metal casing
High Transmit Power and Built-in Patch Antenna

Up to 500mW output power from the board to transmit stronger signals for longer range
Built-in patch antenna for installation convenience and efficiency
LED indicators to display wireless signal strength
High-speed with QoS for Voice, Video, and Data Applications

Equipped with a high-speed IEEE 802.11g wireless network interface based on Atheros™ chipset, transmit rates up to 54Mbps
Backward compatible with 802.11b
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty triple-play (voice, video, and data) applications
Power over Ethernet (PoE) & Flexible Mounting Options

PoE feature reduces the need of additional power cable to the device; a quality Power Supply Equipment (PSE) is bundled in the package
Wall and pole mountable; mounting kit included
Multiple Operation Modes for Different Infrastructures

Two administrator accounts – one for WISP to manage wireless broadband subscribers
Multiple operation modes:
CPE Mode – wireless modem with IP sharing
AP Mode – pure AP
WDS Mode – AP with wireless bridge
Universal Repeater Mode – with MAC NAT
Business-class Security and Multiple-SSID/ VLAN tagging Support

Full range of enterprise-grade wireless security mechanisms such as WEP, WPA and WPA2 (802.11i)
Multiple-SSID capability enables one OWL510 to behave like up to 8 unique Virtual APs (VAPs), the equivalent of 8 wireless Virtual LANs (VLANs) to securely segment wireless network traffic
Support client isolation in public hotspot operation.

Its dual Power over Ethernet (PoE) ports provides redundant power feeds to increase power supply availability. Hardware Flexibility for Networking and Multi-Radio, External Antenna Connectors. Hardware wise, a single OWL800 is capable of hosting 2-4 multiple radio modules simultaneously. Each module can be used for serving wireless clients, building wireless bridges, or establishing wireless backhauls. For some countries that permit high-power transmission, higher power modules are optionally available. There are 4 N-type antenna connectors extended from the modules on the OWL800 board, which not only gives the flexibility in choosing antennas but greatly simplifies the antenna installation. Software Flexibility for Networking.

Multi-Mode, Multi-Link. AP, Bridge/Mesh Node, Gateway. To support diversified wireless network architectures, the OWL800 provides multiple operating modes, including Point-to-Point Bridge, Point-to-Multipoint Bridge, AP station and AP Gateway. Unlike most of common access points that rely on a single radio for different purposes at one time, the OWL800 with multiple radio modules receives and transmits over-the-air signals for each bridge link or AP station with one dedicated wireless radio to prevent degraded performance.

Caracteristici & Beneficii

Rugged for Outdoor or Harsh Environment

Weatherproof and watertight cast-metal housing with an IP68 rating
Surge immunity up to 15KV
Dual PoE for redundant power input and data link
Support multiple operation modes – Gateway mode, AP mode, and Relay mode
Multiple Radios and Antenna Connectors, Flexible for PtP, PtMP, or Mesh networks

Two built-in 802.11 a/b/g radio with two additional mini-PCI slots for expansion
High power radio modules are available options for countries where higher power transmitting is permitted
Low-loss N-type connectors allow for more flexible antenna choices for professionals
Antennas can be attached directly on the OWL800, or connected closely to OWL800, for reducing signal losses
Dual bands (2.4G and 5G) with more channels allow better channel planning to avoid interference
Each Radio module can be configured as AP or WDS independently. Up to four modules can be serving in one OWL800
Built-in AAA and User Management for Hotspot Operation

Support built-in Local accounts and On-demand accounts for user authentication
Support multiple external RADIUS servers for user authentication
Support UAM and IEEE802.1x access control functions
Built-in Hotspot access control and billing features
Robust and Reliable Wireless Link Construction

Dual PoE power input
Support 8 WDS links per 802.11a/b/g radio module
WDS discovery and link table for easy connect
Support VLAN tags over wireless inter-AP links (WDS) in addition to over the wireless links from clients to AP
Dynamic wireless link backup for network reliability
Dedicated WDS radios could form a mesh WLAN without taking away some bandwidth for serving clients
Wireless Security and QoS Support

Advanced security options: 64/128/152 bits WEP, WPA/WPA2 with IEEE 802.1X or Pre-Shared Key
Support encryption, including WEP, AES, or TKIP, over wireless inter-AP links (WDS)
Wireless LAN segmentation, Disable SSID Broadcast
Support client-isolation so that clients are isolated from each other under one AP
Support QoS tags over wireless inter-AP links (WDS)
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty multimedia applications such as voice, audio and video
Excellent Solution for Community WLAN

Each AP module is capable of emulating up to 8 virtual APs (VAPs) simultaneously
With the capabilities of multiple-SSID and VLAN tag association, OWL800 allows equipment-sharing among different franchises; moreover, its QoS feature enables differentiated service operations
Multiple OWL800′s can be managed under an external WLAN controller to form a managed WLAN solution.

OWL400 supports multiple operation modes (AP/Bridge/CPE) and works well as a last-mile solution for wireless ISPs (WISPs). When in AP mode , OWL400 operates as an AP station with wall-penetrating high-power signal and long-range coverage to better serve Wi-Fi clients. In addition, it can be set up as a WDS node by establishing multiple WDS links to bridge neighbor access points together.

Coming with business-class security, OWL400 in AP mode is also ideal for enterprise applications. Furthermore, one OWL400 with multiple SSIDs is capable of acting as multiple Virtual APs (VAPs). By tagging the traffic from each VAP with a unique VLAN ID, it allows for segmenting a corporate network using VLANs to protect critical resources.

When operating in CPE (Client) mode , it functions as a Wi-Fi modem gateway to receive wireless signal over the last-mile Internet feed from WISPs. The CPE's bandwidth to the Internet can be assigned by the WISP.

Being a versatile Wi-Fi device, OWL400 does not limit itself to outdoor usage only. When managed by a Controller (such as the WHG-series), it performs as a Wi-Fi base station in either a public or private wireless access deployment.

Rugged, Compact-Sized, and Adaptive to Versatile Environments
Diversified deployments:
Municipal Wi-Fi service
Home Owner Association (HOA), RV parks, and recreation resorts
Hotels, mobile hospitals, and mobile libraries
Shopping malls, airports, harbors, roadways, warehouse, and manufacturing plants
IP68 weather- and water-proof, housed in durable, rust-resistant metal casing
High Transmit Power and N-type Connector
Up to 200mW output power from the board to transmit stronger signals for longer range
N-type connector allows for choosing suitable antenna types and gains with flexibility
High-speed with QoS for Voice, Video, and Data Applications
Equipped with a high-speed IEEE 802.11n/a chipset, supporting transmit rate up to 300Mbps
Support IEEE 802.11e Wireless Multi-Media (WMM) to fulfill bandwidth thirsty triple-play (voice, video, and data) applications
Power over Ethernet (PoE) & Flexible Mounting Options
PoE feature reduces the need of additional power cable to the device; a quality Power Supply Equipment (PSE) is bundled in the package
Wall and pole mountable; mounting kit included
Multiple Operation Modes for Different Infrastructures
Two administrator accounts – one for WISP to manage wireless broadband one for subscribers
Multiple operation modes:
AP Mode – pure AP
WDS Mode – AP with wireless bridge
Universal Repeater Mode – with MAC NAT
CPE Mode – wireless modem with IP sharing
Business-class Security and Multiple-SSID/ VLAN tagging Support
Full range of enterprise-grade wireless security mechanisms such as WEP, WPA and WPA2 (802.11i)
Multiple-SSID capability enables one OWL400 to behave like up to 7 unique APs, the equivalent of 7 wireless Virtual LANs (VLANs) to securely segment wireless network traffic
Support client isolation in public hotspot operation

The IP68-rated metal sealed CPE100 is compact in size and weatherproof. Coming with a mounting kit, it can be mounted on a pole or wall. It is suitable for both indoor and outdoor usage with its 200mW output power.

The CPE 100 can be deployed in various environments, for example:

• Outdoor access point for school campuses, enterprise campuses, or manufacture plants.
• Wireless CPE for MDU/ MTU, such as apartments, dormitories, and office complexes.
• Indoor access point for hotels, factories, or warehouses where metal industrial grade devices are preferred.
• Public hotspot operation for café, parks, convention centers, shopping malls, or airports.
• Wireless coverage for both indoor and outdoor ground for private resorts, acre estate/home's yards, or golf course communities.

A WISP Deployment Example

Acts as a “Wireless Modem” to bring wireless bandwidth to home and office buildings.
Wireless Bandwidth Allocation (uplink/downlink) delivered to each building depending on different subscription plans.
Full range of wireless security mechanisms such as WEP, WPA and WPA2 (802.11i) that are important for enterprise wireless deployments.
Acts as a Home Router for IP Sharing and firewall, all-in-one installation solution.
Weatherproof and watertight from its rugged aluminum housing (IP68 Approved).
Power over Ethernet (PoE) built-in for single cable installation.
On board Ethernet surge protection.
Multi-mode Support:
CPE Mode
AP Mode
WDS Mode
Universal Repeater (Bridge) Mode

The IP68-rated metal sealed CPE110 is compact in size and weatherproof. Coming with a mounting kit, it can be mounted on a pole or wall. It is suitable for both indoor and outdoor usage with its 200mW output power.

The CPE 100 can be deployed in various environments, for example:

• Outdoor access point for school campuses, enterprise campuses, or manufacture plants.
• Wireless CPE for MDU/ MTU, such as apartments, dormitories, and office complexes.
• Indoor access point for hotels, factories, or warehouses where metal industrial grade devices are preferred.
• Public hotspot operation for café, parks, convention centers, shopping malls, or airports.
• Wireless coverage for both indoor and outdoor ground for private resorts, acre estate/home's yards, or golf course communities.

A WISP Deployment Example

Acts as a “Wireless Modem” to bring wireless bandwidth to home and office buildings.
Wireless Bandwidth Allocation (uplink/downlink) delivered to each building depending on different subscription plans.
Full range of wireless security mechanisms such as WEP, WPA and WPA2 (802.11i) that are important for enterprise wireless deployments.
Acts as a Home Router for IP Sharing and firewall, all-in-one installation solution.
Weatherproof and watertight from its rugged aluminum housing (IP68 Approved).
Power over Ethernet (PoE) built-in for single cable installation.
On board Ethernet surge protection.
Multi-mode Support:
CPE Mode
AP Mode
WDS Mode
Universal Repeater (Bridge) Mode

> Gratuit sa poti vedea HD Digital TV

> 780p / 1080i Rezoluţiile

> Digitale de radio şi canale de date

> De căutare automată a canalelor

> Ieşire HDMI

> Single SCART Socket

> Conecteaza la sistemul aeriene existente şi TV

Description: Outdoor antenna

Frequency range: Digital terrestrial TV

Coverage: 24 dB

Dimensiuni
Height: 75 cm
Width: 54 cm
Depth: 128.2 cm

Weight With packaging: 3 kg

Content Mounting kit, connectors and coaxial cable